Sanyo PLC-HF10000L Owner's Manual Network set up - Page 39

Continue from the previous page. Item Description Screen aspect.....Sets the aspect ratio to fit the screen. (Full, 16:9, 16:10, 4:3) *Full is for flexible aspect ratio. *Some Screen settings are limited depending on the Screen aspect as shown in the below table. Keystone Corrects the keystone distortion of the projected image on the screen by pressing the Up/Down/Left/Right buttons. Click Reset to reset the keystone correction. Digital zoom.......Adjusts the image zoom in and out at computer input mode. Click OFF to return the image to its normal size. Reset Resets the settings of Screen, Ceiling, Rear, Screen aspect, Keystone and Digital zoom. Setting up the projector Lens adjustment Item Description Zoom Adjusts the image zoom in and out. Focus Adjusts the focus of the image. Lens shift Positions to the desired point by pressing the Up/Down/Left/Right buttons. Click Reset to return to the center position. * Step(s Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right buttons to adjust them quickly. Screen Aspect Screen mode Normal Full Wide(16:9) Zoom True Natural wide Custom Full or 16:10 Input source Video PC 4 4 4 4 4 4 4 4 *1 4 *2 *1 4 4 16:9 Input source Video PC 4 4 4 4 *1 *1 4 4 *1 4 *2 *1 44 4:3 Input source Video PC 4 4 4 4 *3 4 4 4 *1 4 *1 *1 4 4 ✐ The mark "4" means that the available screen mode in the selected input source system. *1 T he error message appears when selecting the disabled screen mode indicated with "*1". *2 Natural widecannot be selected when 720p, 1035i, 1080i, 1080p or 2K is selected in AV system menu. *3 Wide(16:9) can be selected when the video signal is 2K. 39 ENGLISH