Sanyo PLC-HF15000L RS232 Expand - Page 84
CR_AUTOLAMPCONTRL Command, 9.6 CR_LAMPSTS Command, 9.7 CR_INFLAMP Command, 9.8 CR_PROJH Command
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 9.9.5 CR_AUTOLAMPCONTRL Command Command "CR_AUTOLAMPCONTRL" [CR] Details Get selected Lamp control mode Acceptable "000_%1" [CR] "NORMAL NORMAL is selected. Response %1 "ECO1 ECO1 is selected. "ECO2 ECO2 is selected. "AUTO AUTO is selected. Unacceptable "Error Code" [CR] 9.9.6 CR_LAMPSTS Command Command "CR_LAMPSTS" [CR] Details Get the information of Lamp lighting status Acceptable "000_%1" [CR] "4****" The first character indicates 4 lamps are used in this model. The following characters indicate each lamp status in lamp number order as showed below. Response %1 "I Lamp is ON "O Lamp is OFF "X Lamp Failure e.g. "4IOXI This indicates it is 4-lamps system, Lamp #1 and #4 are ON, Lamp #2 is OFF, and Lamp #3 is failed. Unacceptable "?" [CR] 9.9.7 CR_INFLAMP Command Command "CR_INFLAMP" [CR] Details Get Lamp mode switching status Acceptable "000_%1" [CR] Response %1 "NML" -- in Normal status (lamp switching operation is not active.) Unacceptable "?" [CR] 9.9.8 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of projector (in hours) Acceptable "000_%1" [CR] Response %1 "0000000" - "0099999" Unacceptable "?" [CR] 9.9.9 CR_HMLAMP Command Command "CR_HMLAMP" [CR] Details Get total lamp number Acceptable Response %1 "000_%1" [CR] "004" Unacceptable "?" [CR] 84/105