Sanyo PLC-XK2600 Owner's Manual Network - Page 40

Chapter 4 Controlling the Projector Setting 1 Item Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes the Auto PC Adj, and Input Search function below according to the each setting after clicking Start button. Auto PC Adj.......Sets Auto PC Adjustment mode. (ON, OFF) Input search......Sets the auto-input signal detection mode. (ON1, ON2, OFF) Auto keystone.....Sets Auto Keystone mode. (Auto, Manual, OFF) Background.........Sets the screen background when no signal input. (Blue, User, Black) Display Switches on or off the on-screen menu display on the screen. (OFF, Countdown off, ON) Countdown off........Displays image during the starting up. Logo Sets on or off the logo display on the screen during the startup. (OFF, Default, User) Setting 2 Item Description Terminal Sets the COMPUTER IN 2/MONITOR OUT terminal. (Computer2, Monitor out) Power management......Sets into the selected power management mode (Ready, Shutdown, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. Direct on Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF) Lamp control......Selects lamp control mode. (High, Normal, Eco) Key lock Sets the prohibition of controls either Projector or Remote control. (OFF, Projector keys, Remote control) Fan control Sets the fan control speed. OFF Normal mode ON1 Highland mode 1 ON2 Highland mode 2 Lamp Corres. Value(h Displays the lamp use time (Corresponding value) . Reset the time after lamp replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. 40