Sanyo PLC XP46 Owners Manual

Sanyo PLC XP46 - XGA LCD Projector Manual

Get Sanyo PLC XP46 - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC XP46 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC XP46 manual content summary:

  • Sanyo PLC XP46 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XP46 PLC-XP46L (Lensless) Owner's Manual
  • Sanyo PLC XP46 | Owners Manual - Page 2
    EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH
  • Sanyo PLC XP46 | Owners Manual - Page 3
    dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics
  • Sanyo PLC XP46 | Owners Manual - Page 4
    unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-XP46/PLC-XP46L : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street
  • Sanyo PLC XP46 | Owners Manual - Page 5
    38 AIR FILTER CARE AND CLEANING 38 CLEANING PROJECTION LENS 38 TURNING ON / OFF PROJECTOR 19 LAMP REPLACEMENT 39 ADJUSTING SCREEN ZOOM ADJUSTMENT 20 LAMP REPLACE COUNTER 39 20 TROUBLESHOOTING 40 FOCUS ADJUSTMENT LENS SHIFT ADJUSTMENT 20 TECHNICAL SPECIFICATIONS 42 20 KEYSTONE
  • Sanyo PLC XP46 | Owners Manual - Page 6
    has Wireless Mouse function for a connected computer. This function enables you to operate both projector and computer with Remote Control Unit only. x Multilanguage Menu Display Operation menu is displayed in; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean
  • Sanyo PLC XP46 | Owners Manual - Page 7
    PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET TOP CONTROLS AND INDICATORS PROJECTION LENS AIR INTAKE VENT LENS COVER SPEAKERS INFRARED REMOTE RECEIVER BACK OF CABINET EXHAUST VENT POWER CORD CONNECTOR TERMINALS AND CONNECTORS INFRARED REMOTE RECEIVER HOT AIR EXHAUSTED ! Air
  • Sanyo PLC XP46 | Owners Manual - Page 8
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug AC
  • Sanyo PLC XP46 | Owners Manual - Page 9
    Lensless model PLC-XP46L only) Before setting up a projector, install Projection Lens on Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of a Projection Lens, contact sales dealer where you purchased a projector. 2. For installation
  • Sanyo PLC XP46 | Owners Manual - Page 10
    BE SET IN THE WAY INDICATED. PROJECTION LAMP MAY MALFUNCTION. ADJUSTABLE FEET FEET LOCK LATCHES MOVING PROJECTOR Use Carry Handle when moving a Projector. When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet. When this projector is not in use for an
  • Sanyo PLC XP46 | Owners Manual - Page 11
    to P12.) USB CONNECTOR (Series B) When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this terminal. (Refer to P12.) RESET BUTTON This projector uses a micro processor to control this unit, and occasionally, this micro processor
  • Sanyo PLC XP46 | Owners Manual - Page 12
    IN 1 or 2 ANALOG INPUT 1 DIGITAL(DVI-D) R/C JACK AUDIO 1 USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 VIDEO/Y Cb/Pb Cr/Pr R-AUDIO-L S-VIDEO (MONO) INPUT 3 Terminals of a Projector Use one of these Control Cables corresponding with terminal of your computer
  • Sanyo PLC XP46 | Owners Manual - Page 13
    EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Pb - Cr/Pr AUDIO IN S-VIDEO ANALOG INPUT 1 DIGITAL(DVI-D) R/C JACK AUDIO 1 USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 VIDEO/Y Cb
  • Sanyo PLC XP46 | Owners Manual - Page 14
    it again. LASER KEYSTONE LENS SHIFT NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P19 FUNCTION This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window. When LASER button is pressed, laser light goes
  • Sanyo PLC XP46 | Owners Manual - Page 15
    heat. q Do not drop Remote Control Unit. q If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. q Danger of explosion if battery is incorrectly replaced. q Dispose of used batteries according to batteries manufacturers instructions and local rules. 15
  • Sanyo PLC XP46 | Owners Manual - Page 16
    has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR Turns to yellow when life of projection lamp draws to an end. (P39) WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P38) READY INDICATOR Lights green when a projector is
  • Sanyo PLC XP46 | Owners Manual - Page 17
    HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. WIRELESS REMOTE CONTROL POINT BUTTON Used to move Pointer UP/ DOWN
  • Sanyo PLC XP46 | Owners Manual - Page 18
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35,-37) INPUT MENU Used to select input source (Input
  • Sanyo PLC XP46 | Owners Manual - Page 19
    Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP Indicator lights bright and READY Indicator turns off. After projector to turn a projector off and disconnect AC Turn a projector on again. If WARNING
  • Sanyo PLC XP46 | Owners Manual - Page 20
    is corrected by KEYSTONE adjustment. Message disappears after 4 seconds. LENS SHIFT ADJUSTMENT 1 Press LENS SHIFT button on Top Control or LENS SHIFT v/w button on Remote Control Unit. Message "Lens shift" is displayed. 2 Press POINT UP button or LENS SHIFT v button to move image up, press POINT
  • Sanyo PLC XP46 | Owners Manual - Page 21
    , press FREEZE button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button. NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button except POINT / SELECT / RIGHT CLICK
  • Sanyo PLC XP46 | Owners Manual - Page 22
    COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button Input 1 Input 2 Input 3 MENU
  • Sanyo PLC XP46 | Owners Manual - Page 23
    on SYSTEM Menu icon. When image is not provided properly, manual adjustment is required. (Refer to P24 and 25.) There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.) PC SYSTEM MENU PC SYSTEM Menu icon
  • Sanyo PLC XP46 | Owners Manual - Page 24
    cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo PLC XP46 | Owners Manual - Page 25
    area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and clear and then press SELECT button. Other icons operates as follows. Reset Reset all adjust parameters on adjustment dialog box to previous figure. Vacant
  • Sanyo PLC XP46 | Owners Manual - Page 26
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 160 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3 VGA 4
  • Sanyo PLC XP46 | Owners Manual - Page 27
    Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard
  • Sanyo PLC XP46 | Owners Manual - Page 28
    better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT set and then press SELECT button. Other icons operates as follows. Reset Reset all adjustment to previous figure. Quit Closes IMAGE MENU. Store icon
  • Sanyo PLC XP46 | Owners Manual - Page 29
    . A projected image can be also expanded by pressing D.ZOOM v button on Remote Control Unit. NOTE q True and Digital zoom +/- cannot be operated when "RGB", 's screen resolution is higher than 1280 X 1024, reset resolution to lower before connecting projector. q Image data in other than XGA (1024
  • Sanyo PLC XP46 | Owners Manual - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connecting to those equipment, select a type of Video INPUT MENU source in SOURCE SELECT Menu. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT
  • Sanyo PLC XP46 | Owners Manual - Page 31
    Video signal, and adjusts itself to optimize its performance. When Video System is 1035i or 1080i, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i
  • Sanyo PLC XP46 | Owners Manual - Page 32
    1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34). IMAGE button
  • Sanyo PLC XP46 | Owners Manual - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level
  • Sanyo PLC XP46 | Owners Manual - Page 34
    Reset all adjustment to previous figure. Quit Closes IMAGE MENU. Image Level Menu Move a red frame pointer to image icon to be set and then press SELECT button. Store icon PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image
  • Sanyo PLC XP46 | Owners Manual - Page 35
    When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode). In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again. Rear function
  • Sanyo PLC XP46 | Owners Manual - Page 36
    " when controlling a computer with Remote Control of this projector. Projector mode Select " " when controlling a projector with computer. NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruction in USB driver package
  • Sanyo PLC XP46 | Owners Manual - Page 37
    . Quit Closes SETTING MENU. Lamp counter reset Move pointer to Lamp counter reset and then press SELECT button. Message "Lamp replace counter reset?" is displayed. OPERATING WIRELESS MOUSE Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless
  • Sanyo PLC XP46 | Owners Manual - Page 38
    a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. 2 Lightly wipe a cleaning cloth over Projection Lens. 3 When a projector is not in use, replace Lens Cover. 38
  • Sanyo PLC XP46 | Owners Manual - Page 39
    . of your projector : PLC-XP46/PLC-XP46L q Replacement Lamp Type No. : POA-LMP47 (Service Parts No. 610 297 3891) LAMP REPLACE COUNTER Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting. 1 Turn projector on
  • Sanyo PLC XP46 | Owners Manual - Page 40
    . Problem: No power. Try these Solutions q Plug a projector into your AC outlet. q Make sure READY Indicator lights. q Wait 90 seconds after a projector is turned OFF when turning a projector back on. NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as follows: 1. LAMP
  • Sanyo PLC XP46 | Owners Manual - Page 41
    You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on page 40, 41. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where
  • Sanyo PLC XP46 | Owners Manual - Page 42
    : 1mW / Wave length : 650±20nm) Owner's Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable MAC/VGA Adapter 3 Types Control Cable (For PS/2, Serial and ADB port) Protective Dust Cover Lens Cover q Specifications are subject to change without
  • Sanyo PLC XP46 | Owners Manual - Page 43
    6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 No Connect 16 Hot Plug Detect 24 T.M.D.S. Clock- CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this connector with
  • Sanyo PLC XP46 | Owners Manual - Page 44
    Printed in Japan Part No. 610 297 8247 (1AA6P1P3130-- MA8AA) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Owner’s Manual
PLC-XP46
Multimedia Projector
MODEL
PLC-XP46L
(Lensless)