Sanyo PLC-XT25L User Manual - Page 64

Cleaning the Filter, Resetting the Filter Counter, Filter counter

Get Sanyo PLC-XT25L PDF manuals and user guides View all Sanyo PLC-XT25L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Maintenance and Filter Cleaning Cleaning the Filter Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a "Filter warning" icon (yellow or red) appears on the screen and the WARNING FILTER indicator lights or blinks, clean the filter immediately. Clean the filter by following the steps below. 1 Turn off the projector, and unplug the AC power cord from the AC outlet. 2 First, clean up the dust on the projector and around the air vents. 3 Pull out the filter cover from the projector and then remove the filter. 4 Gently clean the filter by using a brush or blower. WARNING: Do not wash the filter with water and any other liquid matter. Otherwise the filter may be damaged. 5 Reinstall the filter into the projector properly. Filter cover Filter Filter Filter cover 6 Reset the filter counter in the Setting Menu. See "Resetting the Filter Counter" below. CAUTION Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector. Press and hold the filter cover and pull out the filter. NOTE: If the filter is heavily clogged and unable to clean, replace it with a new one. Consult your dealer for details. Replacement Filter Part No.: 910-330-7184 Resetting the Filter Counter Be sure to reset the Filter counter after cleaning or replacing the filter. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the "Filter counter Reset?" appears. Select [Yes] to continue. 3 Another confirmation dialog box appears, select [Yes] to reset the Filter counter. Filter counter Select Reset and the "Filter counter Reset?" appears. Select [Yes], then another confirmation box appears. Select [Yes] again to reset the Filter counter. 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
64
Maintenance and Filter Cleaning
Turn off the projector, and unplug the AC power cord
from the AC outlet.
First, clean up the dust on the projector and around the
air vents.
1
2
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and
adversely affect the life of the projector. If a “Filter warning” icon (yellow or red) appears on the screen and the
WARNING FILTER indicator lights or blinks, clean the filter immediately. Clean the filter by following the steps
below.
Pull out the filter cover from the projector and then
remove the filter.
3
Reinstall the filter into the projector properly.
5
CAUTION
Do not operate the projector with the filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
Gently clean the filter by using a brush or blower.
WARNING: Do not wash the filter with water and
any other liquid matter. Otherwise the filter may
be damaged.
4
Reset the filter counter in the Setting Menu. See
“Resetting the Filter Counter” below.
6
Press and hold the
filter cover and pull
out the filter.
Filter cover
Filter
Filter
Filter cover
Be sure to reset the Filter counter after cleaning or replacing the filter.
Press the MENU button to display the On-Screen
Menu. Use the Point
7 8
buttons to move the red
frame pointer to the Setting Menu icon.
Use the Point
ed
buttons to move the red frame
pointer to Filter counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the filter use, a timer setting
option, and the reset option. Select Reset and the
“Filter counter Reset?” appears. Select [Yes] to
continue.
1
2
Resetting the Filter Counter
Filter counter
NOTE: If the filter is heavily clogged and unable
to clean, replace it with a new one.
Consult your dealer for details.
Replacement Filter Part No.: 910-330-7184
Select Reset and the “Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset
the Filter counter.
Another confirmation dialog box appears, select [Yes]
to reset the Filter counter.
3
Cleaning the Filter