Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up
Sanyo PLC XU115 - XGA LCD Projector Manual
 |
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC XU115 manual content summary:
- Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 1
This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 2
has been tested and found and used in accordance with the instructions, may cause harmful interference to radio for help. Model Number : QXXAVC922---P Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY void the user's authority to operate the equipment. FCC RF Exposure Warning - This - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 3
Electric Co., Ltd. att denna (QXXAVC922---P) står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Hér með lýsir SANYO Electric Co., Ltd. yfir því að (QXXAVC922---P) er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 4
operation depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software, please refer to the respective - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 5
Table of contents Compliance...2 Safety instructions...4 Table of contents...5 Operating environment and configuration 7 Required operating environment for computers 7 Network specifications of the projector 8 1. About LAN functions 9 LAN functions and the features...10 Image projecting system - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 6
wireless LAN setting and security setting 53 E-mail setting...55 SNMP setting...59 7. Controlling the projector 63 Power control and status check...64 Controls...66 PC adjustment...70 Setting up the projector...71 Timer setting...74 Projector setting...135 Troubleshooting...136 Terminology...142 6 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 7
projector via the networks, computers should meet the operating environment below. OS CPU Memory Free HDD Space Screen Resolution Communication Protocol Network Correspond Wireless for Windows Vista 100MB Required to support any of VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), The color - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 8
Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g AdHoc - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 9
1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 9 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 10
. • Network capture function to project the computer's screen image through the projector. • Remote function which allows you to operate the projector from a distance. • Monitoring function for the projector operation. • E-mail function which reports the operating status to your maintenance - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 11
an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 11 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 12
communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 12 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 13
(3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control which is provided with the projector. To use the remote control, point to the projector. You do not need to connect the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 14
Chapter 1 About LAN functions 14 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 15
2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 15 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 16
To use the projector via the networks, follow the setup procedures below. STEP 1 Install the software on computers. Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. STEP 2 Select Wired LAN or Wireless LAN then - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 17
into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista, you should logon as administrator. Before installation, make sure that the other applications are - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 18
Chapter 2 Setup procedures As the "License Agreement" will appear, read contents carefully and click Yes button if you agree to the license agreement to proceed with installing. During the installation, following window may appear, click Continue Anyway button. 3 Click Finish to complete the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 19
1): Converts to the JPEG*1 data format which can be projected with the projector from the JPEG, bitmap and Power Point files. ● Network Viewer 5 ( servers. * To uninstall these software, use "Add/Remove Program" from the control panel. *1 This product supports the JPEG image format. This file - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 20
the "Printers and Faxes" folder in the "Control Panel". ● Network Viewer 5 (File Converter 2): This is a kind of the printer driver to convert to the JPEG data optimized to project by the projector from any of the documents created by the application software. * To uninstall Network Viewer 5 (File - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 21
3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 21 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 22
Chapter 3 Names and functions of the operating screen Network connection standby display Turn on the projector and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 23
double-clicking on a projector name, the web browser gets activated and the projector setup screen will be displayed. Note on Windows Vista When you use the Network Capture 5 software with Windows Vista, the warning dialog "User account control" will appear. In that case, click Allow button to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 24
Wireless easy setting button. o Moderator registration button Register a computer user as a moderator. !0 Join moderator's group button Join the moderator's group which is selected in the Network Projector will appear each time the Network Capture 5 software starts. Select a network adaptor and check - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 25
4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 25 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 26
the LAN connection terminal of the projector. LAN Connection Terminal LINK/ACT Lamp (Orange) Light or blink orange when the projector is connected to the network. LAN Cable Speed Lamp (Green) Light according to the speed of the connected network. SD 10 Base-T.........Off 100 Base-T......On - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 27
from "Network Information" (p.30). In such cases that the LAN cannot be connected, see this or Off. When you setup the network setting manually, select "Off". When it is set On, network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255.0 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 28
location separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 29
Confirming the operation When set up the projector in the location separated by the router and the segment is different; Projector will not be found nor displayed. In that case, the projector needs to be searched directly by the IP address. 1. Press Specify IP button. "Search specified IP address" - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 30
"0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. default (See the menu above.) Select "Wired factory default" from the projector menu and press SELECT button. All the wired LAN settings will go - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 31
.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY ADDRESS DNS ADDRESS IP CONFIGURATION 255.255.255.255 255.255.255.255 MANUAL 255.255.255.255 255.255.255.255 DHCP 255.255.255.255 255.255.255.255 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 32
Chapter 4 Wired LAN configurations 32 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 33
to be equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g. If connecting in Infrastructure mode with an access point, the access point is required to support IEEE 802.11b/g. Caution: Do not use a mobile phone or PHS near (within 20cm/8inch) the projector. It may cause malfunction - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 34
the network connection standby display screen will appear. Refer to "3. Names and Functions of the Operation Screen" (p.21). 2. Select "Wireless Setting" from the projector menu and press SELECT button. Select similar environment between LAN 4 and LAN 5 with the Point 7 8 buttons. (LAN 4, LAN 5, and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 35
to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer (up to 32 characters). with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 36
LAN configurations Configuring security with the projector Configure security with the projector by following the steps below. After configuring the network in "5. Wireless LAN Configurations" (p.33-42), select "Next" in the LAN setting screen and press SELECT button. The security configuration - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 37
Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" Use the Point 7 8 buttons to select "Set" and press SELECT button to return to the Wireless setting screen. Select "Set" in the Wireless setting screen to complete the network setting. 37 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 38
"Set" and press SELECT button to complete the PSK key setting and the Wireless setting screen appears. Select "Set" and press SELECT button to complete the is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 39
cannot be used with Windows 2000. Windows XP should be Service Pack 1 or later version. Setting Procedures 1. Turn on the projector and select "Wireless" from the input menu of the projector. 2. Select "Wireless Setting" from the projector menu and press SELECT button. 3. Select "SIMPLE" with the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 40
Network PIN code" (p.30). Network information Display the current LAN connecting environment. Select "Network Information" from the projector menu and press SELECT button. Wireless Information (Example) Network information MAIN PROGRAM: V1.000 MAC ADDRESS: 08007B650056 IP ADDRESS: 169.254.53 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 41
LAN configuration is set up correctly and the wireless communication is established with the access-point or the computer in the network, the WIRELESS indicator on the front panel lights up. While the projector scans the equipment in the network, the WIRELESS indicator blinks. WIRELESS indicator 41 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 42
CHANNEL NETWORK TYPE WIRELESS SSID/ESSID (SSID/ESSID) WEP (WEP encryption) WPA-PSK (PSK key) WPA2-PSK (PSK key) 255.255.255.255 255.255.255.255 MANUAL 11 802.11b AdHoc 255.255.255.255 255.255.255.255 DHCP 11 INFRASTRUCTURE PJ-WIRELESS5 ANY DISABLE DISABLE DISABLE DISABLE DISABLE DISABLE - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 43
. • E-mail Setting Configure E-mail function to manage the projector. • SNMP Setting Configure SNMP function to manage the projector. Caution: When operating the projector with the browser, connect the projector to the computer with Wired or Wireless LAN. Complete the connection in advance. 43 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 44
authentication window will appear. In that case, type "user" onto the User Name text area and the login Network PIN code onto the Password text area and then click OK button. * The entered User Name must be "user" and it can not be changed. [Note] When the projector is accessed for the first time - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 45
sub menu tab. Page numbers Switches the pages by clicking the number's tab. Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the selected menu. Returns to Display Mode selection page (☞ p.44) * To change the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 46
indicates current value. ✐E ach item has a valid setting range. The setting value exceeding its range becomes invalid. Some control items can not be used depending on the selected input mode or functions of the projector you use. In that case, the values of those items are indicated with "---". 46 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 47
Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 48
display language on the setting page. English or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network PIN code to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 49
1 to 32 alphanumeric characters can be used for the password. What's PJLink? The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring. This standard was established by the Japan Business Machine and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 50
current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 51
) LAN4(Wireless) LAN5(Wireless) Simple(Wireless) For the default setting of the above LAN, see the items "Factory Default Setting". Item Description Change setting.......Selects LAN1 to LAN5 and Simple IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 52
up manually if the DNS address information is not provided on your DHCP server. When selecting "Manual", configure all the items manually. For will appear. During the switching period, the projector cannot be operated. When you use LAN4(wireless) or LAN5(Wireless), the setting items of page [2] and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 53
/ESSID. (up to ASCII 32 characters) SSID/ESSID is case-sensitive. Even though all characters on the Wireless information is uppercase, it is necessary to distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 54
setting Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the on computers and access points, you may be allowed to select only one WEP key. In that case, use key index1. PSK Available when the "WPA-PSK(TKIP)" or "WPA2-PSK(AES)" is selected - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 55
an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting the abnormality on the projector but the SMTP server is down in some other reason, the message will not be sent. In that case, the message "Unable - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 56
into Standby in proper user operation. [2 o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. o When the information of the error, refer to item "Auto Display setting and control page [3]"(+p.124). ✐The length of message should be less than 255 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 57
03-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned off, because Projector power circuit is failed. Unplug the Projector from AC outlet and ask servicing to qualified service personnel. MAIN, ALL - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 58
to users in every power-on of the projector. This alert mail will not be sent when the mail sending condition "When the life span of lamp is reached" is unchecked. ● When lamp corres. value reaches preselect use time: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 59
. Click SNMP Setting on the main menu and set up each item. PJ information Item Description Contact Enter user name of the projector etc. (optional) Place Enter place of the projector (optional) Community name(refer Enter community name (read only). Default name is "public". ✐The SNMP agent - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 60
Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 address can be registered. ✐ Up to 10 trap addresses can be - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 61
. [2 o When PJ is turned into Standby in proper user operation. o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. [3 o When the signal is interrupted. o When the error, refer to item "Auto Display setting and control page [3]"((+p.123). 61 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 62
Chapter 6 Basic setting and operation 62 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 63
7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 63 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 64
Popup confirmation window PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) Status Displays the status of the projector's power. (Refer to next page.) Power control Controls the projector power by clicking the "ON" or "Standby" button. PJ temp. Inside - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 65
About projector condition Power control and status check Status Description Normal Projector is operating normally. Power management in operation Power management is operating Lamp failure Lamp failure is occurring Abnormal Temperature The temperature of the projector became too high Cooling - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 66
Video S-video Network: Wired Wireless ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 67
Controls System This function is to select the system of signal input to the projector. The available system mode are listed on system of the input signal. * The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal listed. Available selection at the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 68
Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 69
Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 69 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 70
7 Controlling the projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 71
Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 72
Chapter 7 Controlling the projector Item Description Language Sets the language display of projector's on-screen display menu is connected to the outlet. Lamp control...........Selects lamp control mode. Pointer Sets the pointer form. Remote control...........Sets the remote control code. 72 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 73
Reset the time after filter replaced. Filter warning..........Sets the time to indicate the filter replacement message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 74
Chapter 7 Controlling the projector Timer setting This page is to set the timer to turn the projector off or on at a programmed when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless" is - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 75
from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Auto Changes lamp mode to "Auto" Lamp High Changes lamp mode to "High" Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 76
7 Controlling the projector Notes on timer setting ✐ U p to 10 timer events can be registered. Timer events always operate according to the next valid event depending on the projector's power status. In the example below, event 3 turns on the projector so next event 4 (also turning on projector - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 77
the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 78
immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the use time (Corresponding value) of the lamp. Filter time Displays the use time of the filter. Timer Displays the timer setting status. ON Timer has been set. OFF No timer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 79
Multi-control Multi-control Controlling and setting the multi-projectors When you install multiple projectors in the network, you can control and set up them together. Click Multi Control on the main menu to display the control page. Note: To control the multiple projectors, each projector must - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 80
Chapter 7 Controlling the projector Start/stop the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF...........Stops multi control function ON Starts multi control function. The multi control menu will - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 81
button. Items Description IP address Enter IP address of the projector to control Memo Enter projector name or installed location etc. Multi control item Control Controlling the projector Control & Image......... Controlling and displaying images Image Displaying the images Confirmation of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 82
and then click Set button. Mode Operation Control Controlling the projector Control & Image Controlling and displaying images Image Displaying the images OFF Excluding from the multi-control Delete Deleting from the multi-control * The multi control item is not changed during using the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 83
of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting" and "Timer" can be set - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 84
and select [3] Auto display from Viewer sub menu (selected by 'Multi-control' - "Network Viewer" menu). Set the display time periods and repeat times for the auto image display. After clicking Start button, the registered projectors start playing back the auto image display in sequential. ✐ F or - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 85
8 Chapter 8. Network capture functions Network Capture is a function to display the screen image and reproduce the sound of the computer via the network. - Real Time Capture - Network Communication - Moderator Function 85 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 86
reproduce the sound of the computer which has a Network Capture 5 software by the projector through the network. This function has 3 kinds of mode as sharing the capture image of a computer with multiple computers and a projector. User can draw the text and figure on the captured image by using - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 87
. Capture transfer Transfers the screen image of the computer to the projector. The captured image edit window appears on the computer screen. Select Parameter set up Sets the communication parameter between the computer and projector. For further information, see item "Parameter set up" on - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 88
resolution is more than projector's panel resolution (XGA), Layer window capture........ To check the Capture Port number, see item "Control by the web browser" (☞ p.91). To check you know that it is an invalid port number. In that case, use another port number. ✐ The reserved port numbers are - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 89
. Registering the computers Up to 30 computers can be registered. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the the network environment and data volume of the image. It cannot be supported for movie pictures. 89 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 90
to reproduce the sound. In that case, start up the Network Capture 5 software first and then start up the movie player software. ✐ If the error message appears, check the item "Parameter set up" (+ p.88). ✐ The sound output from the projector can be controlled with the volume slider and mute item - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 91
the PC5. Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to the real time capturing operation. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 92
Control by the projector * PC provides the Network Capture. PC1 PC2 PJ1 PC3 PC4 Capture PC5 * Star t captur ing of the PC1 from the projector Disconnect" and then press SELECT button. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should be registered - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 93
The Network Capture software installed in the selected computer will start capturing. 2 On the image of the PC1 projected on the screen, search a presentation file data stored in the PC1 by using the wireless mouse function of the remote control supplied with the projector. 3 Select a desired file - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 94
functions Using the Network Communication This Network Communication is to communicate by sharing the captured image of a computer with multiple computers and a projector. Users can draw the text and figure on the captured image by using a drawing tool. The data that has the captured image of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 95
change mode to "ON". * Projector can find up to 30 computers in the network. [2] When serving the capture data to the specific subject computers in the network. Set the to the projector. ✐To display the served capture data, the software Network Capture 5 must be installed on the computer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 96
End Editing * sub pc only Closes the Editing window Control Capture transfer Captures a screen image and sends it to the projector Authority Acquires/releases the authority to edit the capture editing window on foreground always Help Version information Displays software version number 96 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 97
tool bar Width (Large, Medium, Small) Translucence ✐ To switch the tool bars displaying on or off, select each command from menu "Display"-"Tool bar". ✐ User can realign and join the tool bars (Standard, Shape, Color, Attribute), and change it to the floating pallet by a drag and drop of the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 98
Start Communication button. The application window disappears and the capture editing window with a captured image appears on the computer screen. The projector displays captured image on the screen. ✐ If an error message appears, check the item "Parameter set up". (☞p.88) Join the communication - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 99
Edit capture image How to use the Network communication Drawing figures 1 Click " :Pencil" button on the form tool bar. 2 Select its attribute (shape, width, color and translucence) from the form and attribute tool bar. 3 Drag a mouse pointer on the screen image to draw the figure. Erase drawn - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 100
Chapter 8 Network capture functions Drawing letter 1 Click " :Letter frame" button on the form tool bar. 2 Select a color of text with color tool bar. 3 Drag a mouse pointer on the screen image to specify the area of the letter frame. The letter input dialog window will appear. 4 E nter the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 101
can be used under the environment which one or more computers are connected to the projector via the network. Preparation Start up the Network Capture 5 software on the subject computer. Set standby the projector or turn it on. Check IP address of the subject computer is registered in the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 102
IP address of the computer has a editing authority Item Description Free Releases the editing authority forcibly ➔ Sets condition which all the users can acquire an authority Quit Quits the communication forcibly ➔ The capture editing window on all the computers closes forcibly. Update - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 103
the participants' data directly in a short time and in real time without taking time to transfer the data to the computer connected to the projector. The image data will not be limited by the computer's application because the data transfer of each computer adopts the screen capturing system. Names - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 104
registration button, the application window changes to "Moderator mode" window as shown in the lower picture below. Normal mode application window Projector list Status of use Moderator registration Join moderator's Pa ra m e te r group setting Moderator mode application window Status of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 105
's condition. On real time, On One-shot capture, On Standby, In Moderator mode, etc. User Indicates the client name (nickname or IP address) used by the projector. Error Indicates the error status during executing the real time capture or one-shot capture. Parameter set up....Sets the parameter - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 106
application window changes "Normal mode". The column of status changes from "#On Moderating" to "On Standby". When there are multiple projectors to unregister, the application window maintains "Moderator mode" until all the registered moderator's groups are unregistered. ✳ Even after the moderator - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 107
capture is executed. The time-out period is 10 seconds. ➔ Check the connection of the network cable. Cannot receive the data from the projector when the Start Communication, Terminate Communication, Capture transfer, Start real time capture or Terminate capture is executed. The time-out period is 10 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 108
Chapter 8 Network capture functions 108 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 109
Network Viewer functions Network Viewer is a function to display the image data stored in the file servers by the projector through the network. Describes the file converter software File Converter 1, File Converter 2, the program creator software Program Editor, and how to use Network Viewer. 109 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 110
the images with the Network Viewer function, it should be converted to the optimized JPEG data for this projector. [1] How to use the Network Viewer 5 (File Converter 1) The File Converter 1 is a software to convert the images from the JPEG, bitmap or Power Point data to the optimized JPEG data for - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 111
Menu Tree Menu Sub Menu View Tools Conversion Help Update Preview size Option Convert each file Convert a folder Version information Create the available data Description Updates contents of the preview window Sets size of the preview image, Large, Middle, Small Sets default of the output - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 112
. Dialog window shown during using "Convert each file" and "Convert a folder" ✐ To convert images from the power point file, Microsoft Power Point software is should be installed in your computer. ✐ In the power point file conversion, all the pages are converted into JPEG files separately. 112 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 113
Root Folder Specify the root directory of the FTP server. Normally use "/". User ID Enter your login account of the FTP sever. Password Enter your password to SXGA+) ✐ The image resolution higher than the projector's panel resolution cannot be displayed. Image rotation..........Selects image - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 114
File Converter 2) The File Converter 2 is a kind of the printer driver software to convert to the optimized JPEG data for the projection from the any documents created by the other software such as text editor, spreadsheet or presentation software. It is possible to convert to the JPEG file from the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 115
Network Viewer function, you can display the images in programmed order with the projector . Procedure of making program 1 To start up the Program Editor, Folder Specify the root directory of the FTP server. Normally use "/". User ID Enter your login account of the FTP sever or use blank when - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 116
using UP or DOWN button. ✐ The programs are stored into the "DispParam" folder at the login root directory and this "DispParam" folder is made by software automatically. 7 Click Register button to register the folder list into the program. 8 Click Close button to quit the Program Editor. 116 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 117
Creating a program file [Program Editor] Setting up the display order and time of the images In the default setting, the display order of the images is the same as ASCII code order of the file name. To change the display order or to set up the display time, take the following procedures. Display the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 118
into the folder newly Red frame : Shows that image is deleted from the folder Added Moved *1 Multiple files canbe selected at once by "Shift" or "Control" key, or with mouse cursor. *2 3 to 240 seconds can be set up for display time. 118 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 119
created program selection Use the web browser to access to the control page of the projector. Click "Viewer" of the Network menu on the web and select the program name which was made at previous section. The projector starts displaying the images along the program. For further information, please see - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 120
: * Should be possible to use the FTP service with Windows 2000 Professional or XP Professional. * User has a full-access account to the FTP server, Network" for input mode previously. 1 Access to the control page on the projector by using the web browser. From the main menu, click Network - Viewer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 121
normally, or enter the directory name follow the "/" as shown in the below example if you have a specified directory in the server. /data/ User ID*1 Enter your login account of the FTP server Password*1 E nter your password of the FTP server Option*1 Set "Display ON" when you display - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 122
Chapter 9 Network Viewer functions After clicking Set, the file list or preview list of the selected folder or program is displayed on the window. Decides a image to start auto display with radio button Selects a page The original image is displayed on another window by clicking on the preview - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 123
start the auto-display. The image in the selected folder or program is displayed on the projector's screen. The web browser opens another window and displays the preview images on the Auto Control window sequentially. 2. Click Stop button to stop the auto-display. • Restart the auto-display, click - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 124
may have the alert E-mail message. For further information, please see the item "3 Option selection for sending alert mail" (☞ pp.56-58). [2] Control by the projector PC1 PC2 PJ2 Project JPEG images with PJ2. PJ1 JPEG PC3 Prog. JPEG FTP file server PC4 PC5 PC6 Select "Network" input mode - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 125
in the FTP server are displayed on the screen. ✐ It enables you to browse the images by using the control buttons (s,t) on the remote control or on the projector. s : Previous image display, t : Next image display 4 To stop the display, select "Disconnect" and then press SELECT button. Item - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 126
Chapter 9 Network Viewer functions 126 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 127
10 Chapter 10. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 127 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 128
on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of the Windows XP Professional.) 1. Select Run... submenu from Start menu on the computer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 129
. The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of display on C1D menu display off *1 Further instructions about the telnet application, please see the on-line guide on your computer. *2 The password is - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 130
is set not to use this JavaScript function, it may not control the projector properly. In that case, the following warning message will be displayed on the top of the page. To enable the JavaScript, please see further instructions on the next page. Flash Player enable The setting page of this - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 131
security setting window, scroll down and find the Scripting item, make sure that "Enable" is selected in item Active Scripting. Flash Player enable ActiveX controls and plug-ins setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 132
server address and port correctly in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Use a proxy server. If you connect the projector to the computer directly with UTP cross cable, it must be unchecked. 132 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 133
Navigator is checked. Flash Player enable Flash Player Plug-in setting Select About:Plug-ins from Help menu on the web browser. The plug-ins software provided on the browser are listed on the page. Check that the Flash Player Plug-in (Shockwave Flash) is installed and set up correctly as - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 134
to which the projector is connected. - Using proxy server When you use an external internet connection from the local area network, select the item Manual proxy configuration. Enter the proxy server address and port number correctly on HTTP Proxy item. For further instruction please consult your - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 135
and using Network Capture 5, you may see the Windows security warning dialog as below. In that case, click "Cancel the block" button on the dialog to enable and check the name of Network Capture 5 listed on the Programs and Services. If there is no program name, add the program by clicking Add - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 136
The LAN cable is connected to the network HUB properly? Wireless LAN Is the WIRELESS indicator on the front panel of the projector lighting? If there are not any problems, confirm the LAN setting again. If the computer supports Wireless LAN, activate the Network Capture 5 and try to connect with - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 137
LAN5 (factory default setting) Troubleshooting Check each item below in the Wireless Setting menu of the projector as follows: *IP Address to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 138
Chapter 10 Appendix ■ Although the connection between PC and the projector is established, images are not pro- jected on the screen. Make sure Wireless/Wired is selected from the Input source menu of the projector. ■ Cannot be turned on/off with the web browser. Make sure the settings of the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 139
mode, check which Wireless channel you are using. If the computer using the same channel as yours is existing closely, the networking speed may be reduced or the communication unstable. Change the channel to resolve the problem. The channels of the projector and projector Client computer must be - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 140
that your computer is not using the firewall function. The projector may not be able to use the port due to this firewall function. In that case, please turn off this function temporarily. There are also with white frame due to the paper margin of the print driver depending on the image data. 140 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 141
■ Sometime I have the incorrect images converted by the File Converter 2? Troubleshooting Try to change the mode to "Disable" on "Document options" - "Print optimization" item on the "Network Viewer 5 (Driver) Advance Options" in the Network Viewer 5 (FileConverter 2) Printer driver setting. 141 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 142
server is operating. ESSID (Extended Service Set Identifier) ESSID is the ID that is set to computers on Wireless LAN or access point in order . The first 3 bytes are a Vendor ID controlled and assigned by IEEE. The last 3 bytes are controlled and assigned by the manufacturers of network interface ( - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 143
Terminology 143 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up - Page 144
SO-WIN-KF3AC NETWORK OWNER'S MANUAL FOR WINDOWS SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
 |
 |
Network Set-up and Operation
For Windows
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Network Viewer
Moderator Function
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.