Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up, Mac
Sanyo PLC XU115 - XGA LCD Projector Manual
 |
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC XU115 manual content summary:
- Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 1
and Wireless Setting Projector Set-up and Operation Network Capture This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 2
has been tested and found and used in accordance with the instructions, may cause harmful interference to radio for help. Model Number : QXXAVC922---P Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY void the user's authority to operate the equipment. FCC RF Exposure Warning - This - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 3
Electric Co., Ltd. att denna (QXXAVC922---P) står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Hér með lýsir SANYO Electric Co., Ltd. yfir því að (QXXAVC922---P) er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 4
depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software, please refer to the respective booklet. 4 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 5
instructions...4 Table of contents...5 Operating environment and configuration 7 Required operating environment for computers 7 Network specifications of the projector projector 36 Network PIN code...39 Network information...39 Wireless factory default...39 WIRELESS indicator display...40 Wireless - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 6
configuration...51 Configuring wireless LAN setting and security setting 53 E-mail setting...55 SNMP setting...59 7. Controlling the projector 63 Power control and status check...64 Controls...66 PC adjustment...70 Setting up the projector...71 Timer setting...74 Projector information...77 Multi - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 7
Protocol Network Correspond Wireless LAN Wired LAN Browser Application MAC OS X v 10.4 or later 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster 256MB or more (512MB is recommended) 100MB Required to support any of VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), The - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 8
Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g AdHoc - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 9
1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 9 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 10
's screen image through the projector. • Remote function which allows you to operate the projector from a distance. • Monitoring function for the projector operation. • E-mail function which reports the operating status to your maintenance management. • Multi control function which can operate - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 11
an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 11 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 12
communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 12 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 13
(3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control which is provided with the projector. To use the remote control, point to the projector. You do not need to connect the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 14
Chapter 1 About LAN functions 14 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 15
2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 15 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 16
To use the projector via the networks, follow the setup procedures below. STEP 1 Install the software on computers. Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. STEP 2 Select Wired LAN or Wireless LAN then - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 17
into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer, logon as an administrator. Before installation, make sure that the other applications are closed, otherwise proper installation cannot be made. Network - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 18
Chapter 2 Setup procedures 4 Select a Destination, and Click Continue. 5 Click Install to perform a basic installation. 6 Click Close to complete the installation. 18 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 19
Installed software The following software is installed on your computer. Installing the software ● Network Capture 5: Captures the displayed image of the computer and serves it to the projector via the network. * Move to Trash to uninstall this software. 19 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 20
Chapter 2 Setup procedures 20 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 21
3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 21 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 22
Chapter 3 Names and functions of the operating screen Network connection standby display Turn on the projector and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 23
Network Capture 5 window Network Capture 5 window This software is to project the computer screen via the networks. Click the projector connected to the networks. w Specify IP button When connected to a different segment network, the projector can not be retrieved automatically. In that case, press - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 24
network adaptors When your computer provides multiple network adaptors, the network adaptor selecting window will appear each time the Network Capture 5 software starts. Select a network adaptor and check the "Select a network adaptor as default" and then click OK. To change the setting, refer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 25
4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 25 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 26
the LAN connection terminal of the projector. LAN Connection Terminal LINK/ACT Lamp (Orange) Light or blink orange when the projector is connected to the network. LAN Cable Speed Lamp (Green) Light according to the speed of the connected network. SD 10 Base-T.........Off 100 Base-T......On - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 27
from "Network Information" (p.30). In such cases that the LAN cannot be connected, see this or Off. When you setup the network setting manually, select "Off". When it is set On, network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255.0 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 28
location separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 29
not be found nor displayed. In that case, the projector needs to be searched directly by the IP address. 1. Press Specify IP button. The window below appears. 2. Enter the IP address of projector and Click OK. Then, the projector will be added on the Network Projector List of the application window - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 30
"0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. default (See the menu above.) Select "Wired factory default" from the projector menu and press SELECT button. All the wired LAN settings will go - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 31
.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY ADDRESS DNS ADDRESS IP CONFIGURATION 255.255.255.255 255.255.255.255 MANUAL 255.255.255.255 255.255.255.255 DHCP 255.255.255.255 255.255.255.255 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 32
Chapter 4 Wired LAN configurations 32 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 33
to be equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g. If connecting in Infrastructure mode with an access point, the access point is required to support IEEE 802.11b/g. Caution: Do not use a mobile phone or PHS near (within 20cm/8inch) the projector. It may cause malfunction - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 34
the network connection standby display screen will appear. Refer to "3. Names and Functions of the Operation Screen" (p.21). 2. Select "Wireless Setting" from the projector menu and press SELECT button. Select similar environment between LAN 4 and LAN 5 with the Point 7 8 buttons. (LAN 4, LAN 5, and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 35
to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer (up to 32 characters). with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 36
LAN configurations Configuring security with the projector Configure security with the projector by following the steps below. After configuring the network in "5. Wireless LAN Configurations" (p.33-42), select "Next" in the LAN setting screen and press SELECT button. The security configuration - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 37
Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" Use the Point 7 8 buttons to select "Set" and press SELECT button to return to the Wireless setting screen. Select "Set" in the Wireless setting screen to complete the network setting. 37 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 38
"Set" and press SELECT button to complete the PSK key setting and the Wireless setting screen appears. Select "Set" and press SELECT button to complete the is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 39
Network PIN code" (p.30). Network information Display the current LAN connecting environment. Select "Network Information" from the projector menu and press SELECT button. Wireless Information (Example) Network information MAIN PROGRAM: V1.000 MAC ADDRESS: 08007B650056 IP ADDRESS: 169.254.53 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 40
LAN configuration is set up correctly and the wireless communication is established with the access-point or the computer in the network, the WIRELESS indicator on the front panel lights up. While the projector scans the equipment in the network, the WIRELESS indicator blinks. WIRELESS indicator 40 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 41
NETWORK TYPE WIRELESS SSID/ESSID (SSID/ESSID) WEP (WEP encryption) WPA-PSK (PSK key) WPA2-PSK (PSK key) 255.255.0.0 255.255.255.0 255.255.0.0 255.255.255.255 255.255.255.255 MANUAL 11 802.11b AdHoc 255.255.255.255 255.255.255.255 DHCP 11 INFRASTRUCTURE 255.255.255 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 42
Chapter 5 Wireless LAN configurations 42 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 43
. • E-mail Setting Configure E-mail function to manage the projector. • SNMP Setting Configure SNMP function to manage the projector. Caution: When operating the projector with the browser, connect the projector to the computer with Wired or Wireless LAN. Complete the connection in advance. 43 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 44
the network traffic is heavy. (This mode has some limitations on the multi-control functions.) If the password has been set on the setting page, the authentication window will appear. In that case, type "user" onto the User Name text area and the login Network PIN code onto the Password text area - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 45
sub menu tab. Page numbers Switches the pages by clicking the number's tab. Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the selected menu. Returns to Display Mode selection page (☞ p.44) * To change the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 46
indicates current value. ✐E ach item has a valid setting range. The setting value exceeding its range becomes invalid. Some control items can not be used depending on the selected input mode or functions of the projector you use. In that case, the values of those items are indicated with "---". 46 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 47
Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 48
display language on the setting page. English or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network PIN code to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 49
1 to 32 alphanumeric characters can be used for the password. What's PJLink? The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring. This standard was established by the Japan Business Machine and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 50
current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 51
(Wired) LAN4(Wireless) LAN5(Wireless) For the default setting of the above LAN, see the items "Factory Default Setting". Item Description Change setting.......Selects LAN1 to LAN5 IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet mask............Sets - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 52
up manually if the DNS address information is not provided on your DHCP server. When selecting "Manual", configure all the items manually. For will appear. During the switching period, the projector cannot be operated. When you use LAN4(wireless) or LAN5(Wireless), the setting items of page [2] and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 53
/ESSID. (up to ASCII 32 characters) SSID/ESSID is case-sensitive. Even though all characters on the Wireless information is uppercase, it is necessary to distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 54
setting Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the on computers and access points, you may be allowed to select only one WEP key. In that case, use key index1. PSK Available when the "WPA-PSK(TKIP)" or "WPA2-PSK(AES)" is selected - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 55
an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting the abnormality on the projector but the SMTP server is down in some other reason, the message will not be sent. In that case, the message "Unable - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 56
is failed. o When internal PJ temperature is too high. o When PJ is turned into Standby in proper user operation. [2 o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. o When the signal is interrupted. o When Auto Play is failed. [3 o When - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 57
-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned off, because Projector power circuit is failed. Unplug the Projector from AC outlet and ask servicing to qualified service personnel. MAIN, ALL - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 58
to users in every power-on of the projector. This alert mail will not be sent when the mail sending condition "When the life span of lamp is reached" is unchecked. ● When lamp corres. value reaches preselect use time: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 59
Click SNMP Setting on the main menu and set up each item. PJ information Item Description Contact Enter user name of the projector etc. (optional) Place Enter place of the projector (optional) Community name(refer Enter community name (read only). Default name is "public". ✐The SNMP agent - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 60
Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 addresses can be registered. ✐ Up to 10 trap addresses can be - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 61
is failed. o When internal PJ temperature is too high. [2 o When PJ is turned into Standby in proper user operation. o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. [3 o When the signal is interrupted. o When Auto Play is failed. o When - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 62
Chapter 6 Basic setting and operation 62 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 63
7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 63 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 64
Popup confirmation window PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) Status Displays the status of the projector's power. (Refer to next page.) Power control Controls the projector power by clicking the "ON" or "Standby" button. PJ temp. Inside - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 65
About projector condition Power control and status check Status Description Normal Projector is operating normally. Power management in operation Power management is operating Lamp failure Lamp failure is occurring Abnormal Temperature The temperature of the projector became too high Cooling - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 66
Video S-video Network: Wired Wireless ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 67
Controls System This function is to select the system of signal input to the projector. The available system modes are listed on system of the input signal. * The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal listed. Available selection at the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 68
Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 69
Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 69 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 70
7 Controlling the projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 71
Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 72
Chapter 7 Controlling the projector Item Description Language Sets the language display of projector's on-screen display menu is connected to the outlet. Lamp control...........Selects lamp control mode. Pointer Sets the pointer form. Remote control...........Sets the remote control code. 72 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 73
Reset the time after filter replaced. Filter warning..........Sets the time to indicate the filter replacement message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 74
Chapter 7 Controlling the projector Timer setting This page is to set the timer to turn the projector off or on at a programmed when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless" is - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 75
from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Auto Changes lamp mode to "Auto" Lamp High Changes lamp mode to "High" Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 76
7 Controlling the projector Notes on timer setting ✐ U p to 10 timer events can be registered. Timer events always operate according to the next valid event depending on the projector's power status. In the example below, event 3 turns on the projector so next event 4 (also turning on projector - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 77
the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 78
immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the use time (Corresponding value) of the lamp. Filter time Displays the use time of the filter. Timer Displays the timer setting status. ON Timer has been set. OFF No timer - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 79
Multi-control Multi-control Controlling and setting the multi-projectors When you install multiple projectors in the network, you can control and set up them together. Click Multi Control on the main menu to display the control page. Note: To control the multiple projectors, each projector must - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 80
Chapter 7 Controlling the projector Start/stop the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF...........Stops multi control function ON Starts multi control function. The multi control menu will - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 81
button. Items Description IP address Enter IP address of the projector to control Memo Enter projector name or installed location etc. Multi control item Control Controlling the projector Control & Image......... Controlling and displaying images Image Displaying the images Confirmation of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 82
and then click Set button. Mode Operation Control Controlling the projector Control & Image Controlling and displaying images Image Displaying the images OFF Excluding from the multi-control Delete Deleting from the multi-control * The multi control item is not available with the light - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 83
of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting" and "Timer" can be set - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 84
Chapter 7 Controlling the projector 84 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 85
8 Chapter 8. Network capture functions Network Capture is a function to display the screen image of the computer via the network. - Real Time Capture 85 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 86
About Network Capture function The Network Capture is a function to display the screen image of the computer which has a Network Capture 5 software by the projector through the network. This function has a mode as below. - Real Time Capture (+p.89) A function to display the screen image of the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 87
when "Select capturing object" is checked on the parameter setting. (p.88) Parameter set up Sets the communication parameter between the computer and projector. For further information, see item "Parameter set up" on the next page. Window show Displays the application window on the screen - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 88
the capturing image resolution is more than projector's panel resolution (XGA), Capture start up time....... Sets case, use another port number. ✐ The reserved port numbers are http (80), ftp (21), telnet (23), (25), (110), etc. The port no. 4352, 10000, 10001 are reserved to control the projector - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 89
30 computers can be registered. 1 Access to the control page of the projector by using the web browser. From the Network menu, click environment and data volume of the image. It cannot be supported for movie pictures. ✐ The projector can not reproduce the sound during the real time capturing. - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 90
[1] Control by the computer * PC provides the Network Capture. PC1 ProPjecCPt t2Chis2screen image with PJ2. PJ1 PC3 PC4 Capture PC5 PJ2 PC6 * Start capturing from the PC1. Select input mode to "Network" previously. 1 Start up Network Capture 5. 2 Select the projector(s) listed - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 91
the PC5. Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to the real time capturing operation. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 92
Control by the projector * PC provides the Network Capture. PC1 PC2 PJ1 PC3 PC4 Capture PC5 * Star t captur ing of the PC1 from the projector when using the wireless mouse function ✐ If the error message appears, check item "Parameter set up" (+ p.88). ✐The projector does not provide the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 93
The Network Capture software installed in the selected computer will start capturing. 2 On the image of the PC1 projected on the screen, search a presentation file data stored in the PC1 by using the wireless mouse function of the remote control supplied with the projector. 3 Select a desired file - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 94
Capture transfer, Start real time capture or Terminate capture is executed. ➔ Check connection of the network cable. Cannot transfer the data to the projector when Capture transfer, Start real time capture or Terminate capture is executed. The time-out period is 10 seconds. ➔ Check the connection of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 95
9 Chapter 9. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 95 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 96
on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of Mac OS X v 10.4) 1. Select Terminal from Applications -->Utilities. Type as below on the - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 97
to turn on the projector, and press "Enter" key. Confirm the projector is turning on. To disconnect the communication, press "Control" key and "]" key on C1D menu display off *1 Further instructions about the telnet application, please see the on-line guide on your computer. *2 The password is - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 98
is set not to use this JavaScript function, it may not control the projector properly. In that case, the following warning message will be displayed on the top of the page. To enable the JavaScript, please see further instructions on the next page. Flash Player enable The setting page of this - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 99
Examples: OS/Browsers MAC OS X v 10.4 Web browser setting Safari JavaScript and Flash Player enable setting Select Preferences... from Safari on the web browser and then select Security tab and check Enable plug-ins (for flash player) and Enable JavaScript. 99 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 100
address and port correctly in Web Proxy Server window. For further instruction please consult your network administrator. - Not using proxy server Uncheck HTTPS) of Select a proxy server to configure. If you connect the projector to the computer directly with UTP cross cable, they must be unchecked - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 101
Firewall setting Firewall setting for MAC OS X v 10.4 When you use Macintosh OS X v 10.4 and Network Capture 5, you can cancel the firewall blocking following to the steps below; 1 Open System Preferences from Apple menu, click Sharing icon. The Sharing setting window will appear. 2 Select - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 102
X v 10.5 and Network Capture 5, you may see the security warning dialog as below. In that case, click "Always Allow" button on the dialog to enable the function 2 Select Firewall tab, check Limit incoming connections to specific services and applications, and then click "+". A finder menu appears - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 103
LAN cable is connected to the network HUB properly? Wireless LAN Is the WIRELESS indicator on the front panel of the projector lighting? If there are not any problems, confirm the LAN setting again. Refer to the next item. If the wireless LAN card provides the firewall function itself, set up to - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 104
the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different Is the connection between PC and the projector with Network Capture 5 established? No Check settings for Wireless/Wired LAN. Yes Check settings of - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 105
Troubleshooting ■ Although the connection between PC and the projector is established, images are not pro- jected on the screen. Make sure Wireless/Wired is selected from the Input source menu of the projector. ■ Cannot be turned on/off with the web browser. Make sure the settings of the projector - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 106
server is operating. ESSID (Extended Service Set Identifier) ESSID is the ID that is set to computers on Wireless LAN or access point in order . The first 3 bytes are a Vendor ID controlled and assigned by IEEE. The last 3 bytes are controlled and assigned by the manufacturers of network interface ( - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 107
Terminology 107 - Sanyo PLC XU115 | Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 108
SO-MAC-KF3AC NETWORK OWNER'S MANUAL FOR MACINTOSH SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
 |
 |
Network Set-up and Operation
For Macintosh
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.