Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 97
Command list table, Command, Function
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Use of telnet 5. Type the commands, refer to below table, to control the projector and then press "Enter" key for termination. For example, type "C00" which is a command to turn on the projector, and press "Enter" key. Confirm the projector is turning on. To disconnect the communication, press "Control" key and "]" key at the same time. The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another commands. Command list table Command Function C00 Power on C02 Power off C09 Volume up C0A Volume down C0B Audio Mute on C0C Audio Mute off C1C Menu display on C1D menu display off *1 Further instructions about the telnet application, please see the on-line guide on your computer. *2 The password is a Network PIN code decided item "Network PIN code setting" (☞p.30, 39). If the authentication of the entered password is failed 4 times continuously, the communication will be disconnected automatically. Please try again for the connection. 97