Sanyo PLC XU115 Instruction Manual, PLC-XU115 Memory Viewer Function - Page 4

Memory viewer function Inserting and removing the SD memory card Insert the SD memory card into the card slot on the back side of the projector as shown in the figure below. Push the SD memory card in the arrow direction gently to remove. The card comes out and you can remove it. Insert a card with cutting side up until it clicks. Push the card until it clicks. The card comes out. Direct start-up into the memory viewer mode After inserting the SD memory card, the SD memory card indicator blinks, "Wired" or "Wireless" from the input menu of the projector is automatically selected, the memory viewer start-up image appears briefly and then an image stored in the SD memory card is displayed on the screen. *Automatically, the same input of "Wired" or "Wireless" is selected as last time. *If the image file is not available in the root directory of the SD memory card, the memory viewer browser window appears. *D uring operating the Network Viewer, the Network Capture or the Moderator functions, the direct start-up into the memory viewer mode can not operate. *When the projector is turned off and on while the SD memory card is left inside in the memory viewer mode, the projector starts into the memory viewer mode and an image stored in the SD memory card is displayed on the screen. When you press AUTO SETUP/CANCEL button in the memory viewer mode, the memory viewer browser window as shown on page 6 appears on the screen. When you remove the SD memory card during operating the projector in the memory viewer mode, the input source returns to the previous one selected just before inserting the SD memory card. Note: ✐ During accessing to the SD memory card, do not turn off the power or eject the card because the data in the card might get damaged. During accessing, the SD memory card indicator is blinking ✐ The SD memory card allows you to insert or remove regardless of the power status of the projector. ✐ T he direct start-up into the memory viewer mode may not operate when the SD memory card is inserted immediately after being removed. ✐ The Network Viewer and the Moderator functions are non-Mac-compliant. 4