Sanyo PLC-XU4000 RS232 Basic - Page 20

PLC-XU4000 Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character(See Basic Status Read Command Table) 7.1.2. When a projector receives the appropriate command, it returns a character line as the required data. Required Data [CR] Required Data A character line(See Basic Status Read Command Table) 7.1.3. When the received data cannot be decoded, the projector returns "?" [CR]. 7.2.Transfer Example Get input mode for projector with basic commands PC → Projector Projector → PC Command(issues a command of getting current input mode) "C" "R" "1" "CR" "1" "CR" Processing Response (A few ms 1s) (Shows Computer 1 is selected) 7.3.Operation Requirements When Eco mode is selected in Standby mode of Setting menu and projector is in Standby, Status Read Commands are invalid. 7.4.Status Read Command Command "CR0" [CR] Detail Get the projector's operating status Acceptable "%1" [CR] "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power Failure Response %1 "28" = Cooling Down in process due to Temperature Anomaly "88" = Coming back after Temperature Anomaly "24" = Power Save/Cooling Down in process "04" = Power Save "21" = Cooling Down is in process after Power off due to lamp failure "81" = Standby after Cooling Down due to lamp failure Unacceptable "?" [CR] 19/23