Sanyo PLC-XU74 Owners Manual - Page 57
WARNING, High voltages are used to operate this projector° Do not attempt to open the cabinet°
UPC - 086483063664
View all Sanyo PLC-XU74 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Appendix Some displays are not seen during operations - Check the Display item. (See page 42.) PIN code dialog box appears at the start-up - PIN code lock is being set. Input a PIN code (1234 or numbers you have set). (See pages 18, 48, and 49.) Computer 2 cannot be selected The Terminal function cannot be selected - Select Computer 2 at the Terminal function. (See page 46.) - The Terminal function cannot be selected after Computer 2 is selected. Select other input source such as Computer 1 or Video with the INPUT button on the top control, the COMPUTER button or the VIDEO button on the remote control so that the Terminal function can be selected. The Remote Control does not work - Check the batteries. - Make sure there is no obstruction between the projector and remote control. - Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4' (5 m). - Make sure the code of the remote control is conformed to that of the projector. (See page 47.) - Unlock the Key lock function for the remote control. (See page 48.) WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service. Appendix The CE Mark is a Directive conformity mark of the European Community (EC). Pixelworks ICs used. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 57