Sanyo PLC-XW55A Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Foot
UPC - 086483067976
View all Sanyo PLC-XW55A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set horizontally to the flat screen. ✔ Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • The values shown below are approximate and may vary from the actual sizes. A:B = 6:1 32.6' (9.9 m) 21.7' (6.6 m) 16.3' (5.0 m) 10.8' (3.3 m) 4.3' (1.3 m) 100" 40" 150" 200" (Inch Diagonal) 300" A (Center) B Screen Size (W x H) mm 4 : 3 aspect ratio Throw distance 40" 813 x 610 4.3' (1.3 m) 100" 2032 x 1524 10.8' (3.3 m) 150" 3048 x 2286 16.3' (5.0 m) 200" 4064 x 3048 21.7' (6.6 m) 300" 6096 x 4572 32.6' (9.9 m) Adjustable Foot Projection angle can be adjusted up to 10.0 degrees with the adjustable foot. Press the Foot Lock Latch upward to release the adjustable foot. At the desirable angle, release the latch to lock the adjustable foot. Rotate the adjustable foot from side to side for fine adjust. Keystone distortion of the projected image can be corrected by menu operation. (p.22, 41) Foot Lock Latch (Press upward) Adjustable Foot 13