Sanyo PLCXU48 User Manual - Page 25
Computer System Selection, Selecting Computer System Manually
View all Sanyo PLCXU48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Computer Input Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 55 ) ✔Note: The projector may display one of the following messages. Auto When the projector cannot recognize connected signal conforming to PC Systems provided in this projector, Auto PC Adjustment function works to display proper images and the message "Auto" is displayed on the PC System menu box. When the image is not projected properly, manual adjustment is required. (p27, 28 ) PC System Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. ( " Troubleshooting" p50 ) Mode 1 User preset system manually adjusted in PC Adjust menu. Adjustment data can be stored in Mode 1 - 5. ( p27, 28 ) SVGA 1 PC Systems provided in the projector. The projector chooses a proper system and displays it. *Mode 1 and SVGA 1 are examples. Selecting Computer System Manually PC system can also be selected manually. 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon. 2 Press the Point d button to move the red arrow pointer to the system that you want to set, and then press the SELECT button. PC System Menu The PC System Menu icon displays the system being selected. The systems on this dialog box can be selected. Custom Mode (1~5) set in the PC Adjust Menu. (p27, 28) Computer Input 25