Sanyo PLV 70 Owners Manual - Page 35

VIDEO INPUT QUIT The COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" using the POINT buttons and change to the next mode (LIST mode). LIST MODE LIST MODE COLOR PALETTE DEL The check mark will be cleared and the effect of the setting adjustment for that line on the projected images will be momentarily canceled. COLOR PALETTE The mode will return to COLOR SELECTION mode so that you can re-adjust the setting for the color in that line. This option is not available if the check mark has been cleared by the operation immediately above.) DEL The setting adjustment for the color in that line will be canceled. ALL DEL The setting adjustment for the colors in all lines will be canceled. COLOR M. The mode will return to POINTER mode. Auto picture control Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2) Off Auto picture control OFF position. L1 Auto picture control LEVEL 1 position. L2 Auto picture control LEVEL 2 position. Color temp. Press either POINT LEFT button or POINT RIGHT button to Color temp. level that you want to select. (XLow, Low, Mid or High) White balance (Red) Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Green) Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.) White balance (Blue) Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.) Sharpness Press POINT LEFT button to soften image, and POINT RIGHT button to sharpen image. (From 0 to 15.) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) Noise reduction Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to "On" to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off. ALL DEL MENU COLOR M. NOTE; If you press the COLOR M. button on the remote control, the COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "MENU" using the POINT buttons and store the settings. Press SELECT button at this icon to display previous items. Mid 32 32 32 Press POINT LEFT/RIGHT buttons to adjust value. 15 8 On On Press SELECT button at this icon to store value. Progressive scan Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to "Off" and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on. NOTE : Tint cannot be adjusted when video system is PAL, SECAM, PAL-M or PAL-N. Progressive cannot be operated when "480p", "575p" or "720p" is selected on AV SYSTEM MENU (P32). 35