Sanyo PLV Z3000 Owners Manual - Page 30

Image Adjustment Advanced menu This function can be selected only when Advanced menu in the Setting Menu (see page 37) is set to "On." You can adjust the following items through this function. Iris mode Adjust the lamp aperture. Select from the following options: Mode 1 �� Brightness is prioritized over contrast Mode 2 �� Contrast is prioritized over brightness Fixed Fixed lamp aperture set in the Iris range Iris range Adjust the upper limit of the lamp aperture (from -63 to 0). ✔Note: • Value changes depending on the selected image mode. Auto black stretch Enhance blacks in bright areas of an image. It can be set in 4 steps (Off/Low/Mid/High). Contrast enhancement Adjust the contrast in bright scenes in 4 steps (Off/Low/Mid/High). Transient improvement Adjust the sharpness of image outlines in 4 steps (Off/Low/Mid/ High). Color management Adjust the level, phase, and gamma of any color. You can store up to eight (8) color management data. For details, see "COLOR MANAGEMENT" on page 32. Smooth motion Select one of the following options to get smoother images: Off Basic correction Low Small correction Mid Medium correction High Large correction 5:5 pull down Select the 5:5 pull down mode when the film source is detected. Off 5:5 pull down mode is "Off" Auto 5:5 pull down mode is "On" ✔Note: • 5:5 pull down cannot be operated when HDMI 1080/24p or the computer signal is selected. • 5:5 pull down can be selected only when Progressive is set to Video or Auto (p.29). Press the Point 8 or OK buttons to access the selected item. The adjustment bar is displayed. Use the Point 7 8 buttons to adjust the setting values and press the OK button. If you press the Point d button, the next item can be selected. 30