Sanyo VCC-HD2100 VCC-HD2300 Manual - Page 104

Introduction 3/17 - vcc hd2100p manual

Page 104 highlights

Image pickup device Effective pixels Lowest image illumination Video S/N ratio Lens mount Flange back adjustment Day/Night function White balance Backlight compensation Electronic sensitivity boosting Electronic shutter Electronic iris Iris control Camera settings AGC gain Gamma correction Aperture compensation VIVID COLOR EFFECT DNR Mirror Privacy mask Motion sensor Language selection 1/3" CMOS sensor 16:9 1920 (H) × 1080 (V), 4:3 2288 (H) × 1712 (V) 50IRE: 1.0 lx (at F1.2, color mode, high gain) 50IRE: 0.06 lx (at F1.2, black-and-white mode, high gain) 50dB (when AGC is "OFF") CS mount 12.5±0.5 mm, electrical flange back adjustment (Focus assist function) Auto, color, black-and-white, alarm input switching ( (VCC-HD2300P/VCC-HD2300 only)) Auto (ATW), one push (AWC), manual (R/B gain adjustable), indoor, outdoor, fluorescent Multi-spot evaluative metering, center-weighted average metering, masking Auto (32× max) or Off VCC-HD2300P/VCC-HD2100P: 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 VCC-HD2300/VCC-2100: 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Long exposure shutter (1×, 2×, 4×, 8×, 16×, 32×) ON/OFF (Set [SHUTTER] to "EI".) DC iris lens supported Selectable between 2 camera setting patterns Normal/Middle/High (Manual gain setting possible at Off) 0.45, 1, Mode 1, Mode 2 On/Off (Correction level adjustable) ON/OFF ON/OFF H/V/HV/OFF On/Off, max. 8 mask patterns On (masking/detection area setting)/Off English, French, German, Spanish, Japanese Video output LAN Alarm input Alarm output Composite output 10BASE-T/100BASE-TX (RJ-45 connector) 2 (NO/NC), also serve as Day/Night switching signal (VCC-HD2300P/VCC-HD2300 only) 2 (NO/NC, 16V, 150 mA, open collector) Introduction 3/17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118

Image pickup device
1/3" CMOS sensor
Effective pixels
16:9 1920 (H) × 1080 (V), 4:3 2288 (H) × 1712 (V)
Lowest image
illumination
50IRE: 1.0 lx (at F1.2, color mode, high gain)
50IRE: 0.06 lx (at F1.2, black-and-white mode, high gain)
Video S/N ratio
50dB (when AGC is “OFF”)
Lens mount
CS mount
Flange back adjustment
12.5±0.5 mm, electrical flange back adjustment (Focus assist function)
Day/Night function
Auto, color, black-and-white, alarm input switching
( (VCC-HD2300P/VCC-HD2300 only))
White balance
Auto (ATW), one push (AWC), manual (R/B gain adjustable), indoor, outdoor,
fluorescent
Backlight compensation
Multi-spot evaluative metering, center-weighted average metering, masking
Electronic sensitivity
boosting
Auto (32× max) or Off
Electronic shutter
VCC-HD2300P/VCC-HD2100P: 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
VCC-HD2300/VCC-2100: 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000
Long exposure shutter (1×, 2×, 4×, 8×, 16×, 32×)
Electronic iris
ON/OFF (Set [SHUTTER] to “EI”.)
Iris control
DC iris lens supported
Camera settings
Selectable between 2 camera setting patterns
AGC gain
Normal/Middle/High (Manual gain setting possible at Off)
Gamma correction
0.45, 1, Mode 1, Mode 2
Aperture compensation
On/Off (Correction level adjustable)
VIVID COLOR EFFECT
ON/OFF
DNR
ON/OFF
Mirror
H/V/HV/OFF
Privacy mask
On/Off, max. 8 mask patterns
Motion sensor
On (masking/detection area setting)/Off
Language selection
English, French, German, Spanish, Japanese
Video output
Composite output
LAN
10BASE-T/100BASE-TX (RJ-45 connector)
Alarm input
2 (NO/NC), also serve as Day/Night switching signal (VCC-HD2300P/VCC-HD2300
only)
Alarm output
2 (NO/NC, 16V, 150 mA, open collector)
Introduction 3/17