Sanyo VCC-HD2500 VCC-HD2500 Manual
Sanyo VCC-HD2500 - Full HD 1080p Network Camera Manual
 |
UPC - 086483075018
View all Sanyo VCC-HD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VCC-HD2500 manual content summary:
- Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 1
VCC-HD2500/HD2500P Features of This Camera Specifications Name and Function of Each Component Connections Lens Installation Lens Adjustment Viewing Firmware Version Introduction1/18 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 2
VCC-HD2500/HD2500P Copyright Notice How to use this manual Copyright Notice/How to Use This Manual1/8 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 3
This instruction manual is copyrighted by SANYO Electric Co., Ltd. No materials contained in this manual may be reproduced in any format of HDMI Licensing LLC. All other brands and product names in this manual are the registered trademarks or trademarks of their respective owners. The SDHC Logo - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 4
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY a textual message at program startup or Copyright Notice/How to Use This Manual 3/8 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 5
EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY * [including the GNU Public Licence.] */ Copyright Notice/How to Use This Manual 4/8 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 6
This window shows a table of contents. The headline of the topic currently opened at the main window is highlighted, so the current location among the manual can be easily confirmed. 2 TITLE window This window shows the headline of the current topic. This TITLE window never scrolls not to hide the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 7
linked to the top of the page. Click on this mark to jump to the top of the page. Copyright Notice/How to Use This Manual 6/8 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 8
to the associated settings that must be configured on other menu screens. Caution: Indicates prohibited or restricted operating and setting instructions. This manual uses the following notations to present user-interface related information: Information such as the screen title is represented in all - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 9
of this screenshot is to show you the factory default value for each setting item provided on the screen. Copyright Notice/How to Use This Manual 8/8 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 10
VCC-HD2500/HD2500P Accessing the Camera Control Panel/Tool Panel CAMERA SETTINGS Displaying LIVE video Transmitting Image Data Recording Others Q&A1/11 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 11
that the address for your camera is correctly registered. 3 Port forwarding is not configured on your router. Port forwarding must be configured on your router for you to be able to access a camera from the Internet. For the configuration method, refer to your router's instruction manual. Q&A 2/11 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 12
refer to your router's instruction manual. 5 The IP address you entered is a local address (the one you use at your home). When accessing via Internet, enter the global address (or the URL registered with the DDNS service) and port number of the camera as its IP address. The camera has been suddenly - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 13
Buttons on the control panel/tool panel do not respond. 1 You do not have the required operation privilege. Some buttons on the control panel/tool panel are operable only when you have an adequate operation privilege. Log in as a user with an adequate operation privilege. 2 You have not configured - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 14
I cannot set [SENSE UP] in [IRIS]. You cannot set [SENSE UP] when [SHUTTER] is set to "SHORT" or "LONG". Set [SHUTTER] to "OFF". I cannot set [SHUTTER] to "SHORT" or "LONG". You cannot configure the electronic shutter settings if you have set [SENSE UP] in [IRIS]. Set [SENSE UP] in [IRIS] to "OFF". - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 15
264 Plug-In you can download from SANYO CCTV System Web page. 4 The Web browser you are using for accessing the camera is configured to connect to the Internet no LIVE video is displayed. 1 The configured IP address or domain name is wrong. Configure the IP address or domain name correctly. 2 If the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 16
] setting for your PC to 16 bits or more. The recording rate is low or the video stops temporarily. 1 Among the multiple accesses to the camera, some are from narrowband networks. Change the minimum bit rate for video streaming to a large value. 2 There are multiple accesses or accesses with request - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 17
video image is noisy. 1 The background of the object is dark. Increase the lighting to the monitored environment. Alternatively, click [DAY/NIGHT] on the CAMERA SETTINGS screen and set [DAY/NIGHT] to "AUTO" to enable the Day/Night function. 2 The color quality for your PC monitor is configured to - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 18
the SMTP server requires authentification. Contact your network administrator and change the authentication setting according to the SMTP server setting. This camera supports the two authentication methods, "SMTP" and "POP3 (POP before SMTP)". 4 Transfer is blocked by the "Outbound Port 25 Blocking - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 19
USE" on the SD MEMORY CARD screen. Or, press the NEAR button provided on the left-side face of the camera for 2 seconds or more. I cannot play back. The camera is not equipped with playback functions. Install the supplied application software "HDC Downloader/ DLViewer" from the supplied CD-ROM. This - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 20
has been interrupted due to power off, network fault, or other problem during the process. Redo the upgrade by proceeding as follows. 1 Turn on the camera again. 2 Access the camera again. 3 Check the firmware version on [FIRMWARE UPDATE] in OPTION SETTINGS screen. * If the version number is updated - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 21
VCC-HD2500/HD2500P NETWORK SETTINGS CLOCK SETTINGS USER REGISTRATION VIDEO & AUDIO SETTINGS CAMERA SETTINGS ALARM SETTINGS RECORDING SD MEMORY CARD E-MAIL SETTINGS FTP SETTINGS SECURITY SETTINGS SCHEDULE SETTINGS OPTION SETTINGS Working with Administrator Configuration Screens1/66 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 22
your network administrator. Configure the environment required to connect to the camera via the network by specifying the IP address, subnet mask, and other information. 1 In [IP ADDRESS], select "FIX" and type the IP address of the camera below it. 2 In [SUBNET MASK] and [GATEWAY], type your subnet - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 23
name, instead of the IP address of the camera. To use the DDNS service, configure the following settings. Specify your DNS server address under [DNS SETTINGS] on this screen. Configure the port forwarding on your router. (For details, refer to your router's instruction manual.) 1 In [DDNS], select - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 24
1 On the LOG IN screen, enter the user name and password you wrote down and click Login . The Domain Name registration/change screen appears. SANYO DDNS service site URL: https://www.ddns-sanyosecurity.com 2 Enter the domain name you want to use and click Submit . The domain name is registered with - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 25
only. When SSL communication is enabled, you will be presented with a security warning dialog box when attempting to access the camera. However, this is not a problem and you can continue the operation by clicking [Yes]. If the message "This page contains both secure and nonsecure items..." appears - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 26
for numbers between 3874 and 5000, between 9874 and 10000, between 38087 and 38214, and between 49026 and 49152). If you intend to access the camera from video viewer or similar software, you may name each stream (access name) as you like for easy identification. 1 Under [ACCESS NAME (JPEG)], type - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 27
The multicast RTP port (video and audio) numbers must be even numbers in the range of 1026 to 65534 that do not overlap with the unicast RTP port numbers (except for numbers between 4000 and 5000, 10000, 10001, 38214, and 49152.) The multicast TTL must be specified in the range of 1 to 255. Working - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 28
[CLOCK SET], configure the current date and time in [DATE] and [TIME], respectively. The configured date and time settings will be reflected on the camera's built-in clock. The day of the week is automatically set based on the date and time settings. 2 In [CLOCK DISPLAY], select the clock display - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 29
an appropriate setting is automatically selected according to the [TIME ZONE] setting, you can change it manually. In [CLOCK ADJUST], select how you want to automatically adjust the camera's internal clock. OFF: Disables the clock adjustment function. ON (NTP): Enables automatic clock adjustment - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 30
the current time, click REFRESH . 3 In [NTP SERVER ADDRESS], type the IP address or domain name of the NTP server from which you want to retrieve the the clock adjustment function adjusts the clock in the following timings. When the camera is turned on At the time selected in [TIME TO SYNCHRONIZE] ( - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 31
The clock time will not be adjusted if the difference between the set time and the current time exceeds the range of -29 to +30 minutes. If you set [CLOCK ADJUST] to "ALARM IN1", the ALARM IN1 terminal will serve dedicatedly as a time adjustment terminal, so you can see only the item [POLARITY] in [ - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 32
LOG IN] pull-down menu Use this pull-down menu to enable/disable anonymous user login. Selecting "ON" allows all users to log into the camera without authentication. Working with Administrator Configuration Screens 12/66 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 33
In this case, all login users are regarded as guest users. This means that users will be presented with an authentication check dialog box if they attempt to perform any operation beyond the guest user privilege and must enter an adequate user name and password to proceed. 2 In [USER NAME] and [ - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 34
1 Select the check box next to the user whose data you want to change and click CHANGE . The user registration screen for the selected user appears in a separate window. 2 Change the desired settings and click SET . Your changes are saved and reflected in the user list. Select the check box next to - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 35
click SET . This setting applies to all video/image streams you are configuring. 16:9 (Landscape), 4:3 (Portrait) Clicking SET reboots the camera. This camera supports multi-stream video transmission, allowing you to register up to four video/image streaming condition patterns. Thus, you can reduce - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 36
H.264 video stream. 6 In [FRAME RATE], select the frame rate of the stream. The available options vary depending on your selection in [CODEC] and your camera model. Working with Administrator Configuration Screens 16/66 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 37
10ips, 15ips, 30ips VCC-HD2500P: 0.1ips, 0.2ips, 0.5ips, 1ips, 2.5ips, 5ips, 8ips, 12.5ips, 25ips H.264: VCC-HD2500: 5ips, 10ips, 15ips, 30ips VCC-HD2500P: 5ips, 8ips, 12 under [STREAM UTILIZATION] only as a guide. 3 Click SET in the stream list. The camera will reboot and the settings you configured - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 38
. 2 Click SET in the stream list. The camera will reboot and the settings you configured will be enabled. Configure the conditions of SENSITIVITY], specify the microphone sensitivity. Select the sensitivity of the microphone connected to the camera from 8 levels. +4, +3, +2, +1, 0, -1, -2, -3 2 In [ - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 39
this button to reset all the settings you configured for the selected view (CAM1/CAM2) to the defaults (factory settings). This area shows a series of camera settings. You can use the vertical scroll bar and scroll buttons to scroll the settings up and down. For each - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 40
. 2 CANCEL : Click this button before clicking SET to restore the previous settings. 3 DEFAULT : Click this button to reset the settings on the camera configuration screen to the defaults (factory settings). 4 HELP: Click this to display a menu from which you can display the explanation of each - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 41
boosting power. OFF, x2, x4, x8, x16, x32 Enabling the electronic sensitivity boosting function causes the following: The exposure time of the camera's image sensing device will be increased automatically in dark situations. This may result in conspicuous afterimages, blurs, and white spots if the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 42
) FLUORESCENT: Fixed white balance (for fluorescent lighting) MWB: Manual white balance The configured settings will be applied to "CAM1" "ATW". 2 In [SMART ATW], select "ON" and click SET . The camera now adjusts the white balance automatically based on the color information on the subject. Do - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 43
. AWC allows you to automatically adjust the white balance by simply clicking SET with the camera lens directed toward a white wall, white paper and the like. 1 In [WHITE BALANCE], select "AWC". 2 Direct the camera lens toward a white wall, white paper and the like and, in [AWC LOCK], click SET - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 44
fluorescent lighting (Fixes the color temperature to 4200K.) Use the following procedure to manually adjust the gain values for the red and blue signals. 1 In [WHITE VIEW]. Multi-spot evaluative metering compensates for the backlighting problem by evaluating the photometry of the entire screen. - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 45
backlighting and click SET . 0 (low brightness compensation) to 15 (high brightness compensation) Center-weighted average metering compensates for the backlighting problem by measuring the photometry of the specified area intensively. Configure the position and size of the center metering area. 1 In - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 46
area and therefore does not affect the actual live video image from the camera. 5 Click SET and then BACK . The settings are saved and to the sub menu. You can use light source masking to compensate for backlighting problems with human or other objects in the subject, by masking the light source in - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 47
You can click one grid cell after another to set or cancel the masked area cell by cell. To deselect a block of grid cells in the masked area, right-click one of grid cell and drag the mouse. 3 Click SET and then BACK . The settings are saved and you return to the sub menu. Follow the step below to - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 48
SPEED], select the desired shutter speed and click SET . VCC-HD2500P: 25, 50, 120, 250, 500, 1000, 2000, 4000, 10000 VCC-HD2500: 30, 60, 100, 250, 500, 1000, 2000, time. The long exposure shutter mode increases the sensitivity of the camera to make the subject brighter. You cannot select "LONG" to - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 49
Configure the video signal gain value automatically or manually. Automatically configuring gain value using AGC Manually configuring gain value Auto Gain Control (AGC) is a function that automatically adjusts the gain value of the camera's video signal amplifying circuit according to the brightness - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 50
" and "HIGH". LOW: ADJ: Sets a low luminance level (to increase the time during which the camera operates in the color mode). Enables the manual adjustment of the luminance level. Manually Configuring Mode-Switching Luminance Level (ADJ) You can select a luminance level between 1 and 7 for both - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 51
the ALARM IN1 terminal as the Day/Night switching terminal. ALARM IN2: Sets the ALARM IN2 terminal as the Day/Night switching terminal. OFF: Fixing Camera to Color Video Mode You need to enable the ALARM IN1/2 terminal and configure the signal polarity in [POLARITY] on the ALARM SETTINGS screen - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 52
to Color Video Mode In [DAY/NIGHT] and [EXT ALARM], select "COLOR" and "OFF", respectively, and click SET . Fixing Camera to Black-and-White Video Mode In [DAY/NIGHT], select "B/W" and click SET . You can use the contour compensation function to make the whole video - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 53
In [VIVID COLOR EFFECT], select "ON" and click SET . The configured settings will be applied to "CAM1" or "CAM2", whichever you selected under [VIEW]. Set the gamma correction level to adjust the contrast or brightness level. In [GAMMA], select the gamma correction level and click SET . 0.45: - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 54
. Note that the color of the status indicator ( A ) "FOCUSING" turns from black to orange. If the camera fails to focus on the subject, the status indicator ( A ) will show "ERROR". In this case, manually adjust the focus (in Step 3 ). 3 Click NEAR / FAR to focus on the subject. The back focus - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 55
MANUAL] check box. Be sure to deselect the check box to prevent the loss of focus due to wrong operation. The check box is automatically deselected if you switch from the focus adjustment screen to another screen. Follow the steps below to reduce the loss of camera supports infrared Fixes the camera - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 56
You can configure the privacy mask settings to hide specific portions of surveillance video for privacy protection. When a privacy mask is set, the resolution, frame rate, and image quality of the live video image may be limited. The configured settings will be applied commonly to "CAM1" and "CAM2" - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 57
4 In [COLOR], select the color of the mask pattern(s). BLACK, GREY, WHITE, RED, BLUE 5 In [SEMI TRANSPARENT], select whether to enable or disable the transparency of the mask pattern(s). OFF (Disables transparency), ON (Enables transparency) 6 Click SET and then BACK . The settings are saved and you - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 58
value in [POLARITY] only. If you set [DAY/NIGHT] to "COLOR" and [EXT ALARM] to "ALARM IN1" or "ALARM IN2" under [DAY/NIGHT] on the CAMERA SETTINGS screen, the corresponding terminal will serve as a Day/Night switching terminal. In this case, the [SETTING ITEMS] column shows "DAY/NIGHT" as the column - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 59
alarm condition, select "ON" in [ALARM IN2] and specify the input conditions for it in the same way as for the ALARM IN1 terminal. This camera offers the built-in motion sensor function that automatically detects motion in the subject. The motion sensor detects an alarm condition in three ways as - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 60
To switch the alarm detection method, in [MOTION ALARM], click the desired radio button. 3 Drag the mouse over live video/image to select the area you want to mask. The masked area is indicated by blue-bordered grid cells each containing the letter "M". You can mask as many areas as you want without - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 61
A human face may not be detected if obscured by a hat, sunglasses, or mask, or if the monitoring angle is not appropriate. Checking how the motion sensor works Click TEST . If any motion is detected in a grid cell outside the masked area(s), that grid cell will be shown in red. Correct the detection - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 62
To move a detection area, select it and then drag the mouse. To resize a detection area, place the mouse pointer over its border and then drag the mouse. To delete a set detection area, click the DELETE button ( 1 ) corresponding to the detection area number or drag it out of the screen. 4 In [AREA - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 63
While the sensor is working, this button is labeled as END . To finish checking the motion sensor, click the button. 7 Click SET and then BACK . The settings are saved and you return to the ALARM SETTINGS screen. You can set lines or areas that represent limit lines or restricted areas on the screen - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 64
4 Select the radio button to specify whether to set detection lines or areas and configure the detection conditions. When finished, click SET and then BACK . Although you need to specify whether to set detection lines or areas, you can view the set detection lines and areas together. 1 Setting - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 65
The higher the value, the larger the detectable object size. The detection line (or detection area) is now shown with an image that represents the detection size. Any object larger than this image will be detected. 0 to 5 Selecting "0" means that objects will be detected regardless of their size. In - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 66
1 In [ALARM OUT1], select "ON". 2 In [POLARITY], select the signal polarity of the alarm output terminal. NO (Normally Open): The terminal is normally open and closes when an alarm signal is output. NC (Normally Closed): The terminal is normally closed and opens when an alarm signal is output. 3 In - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 67
1 In [ALARM OUT1], select "REMOTE". Selecting "REMOTE" does not cause the terminal to output an alarm signal automatically even if an alarm condition is detected. 2 In [POLARITY], select the signal polarity of the alarm output terminal. NO (Normally Open): The terminal is normally open and closes - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 68
. Configure the recording conditions on this screen if you intend to record alarm video on the SD memory card installed in the camera. Required operation privilege: admin, operator1 1 In [RECORD STREAM], select the stream you want to record (STREAM1, 2, 3, or 4). The streaming conditions of the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 69
select the time from the occurrence of a network failure until the camera recognizes it as a recording trigger. 15SEC, 20SEC, 30SEC, 40SEC . Select the refresh rate of live video. VCC-HD2500: 0.1ips, 0.2ips, 0.5ips, 1ips, 3ips, 5ips, 10ips, 15ips, 30ips VCC-HD2500P: 0.1ips, 0.2ips, 0.5ips, 1ips, - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 70
logs. 3 In [SIZE/FORMAT], check that the storage capacity of the SD card ("4GB" for example) is shown. This field shows "NO CARD" when the camera has no card and "FORMATTED" when it has a formatted card. 4 Click FORMAT . An operation confirmation dialog box opens. Click OK to start formatting the SD - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 71
OFF: Disables overwrite recording so that the camera stops recording if the recording area becomes full. If recording stops because the recording area has become full, you can turn [OVERWRITE] to "ON", or - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 72
MAIL], select "ON" to enable the e-mail transmission function. 2 In [SSL], select "ON" to use SSL communication. If your e-mail server supports SSL, you can encrypt e-mail transmission. 3 Configure your e-mail server. Type the following information on your e-mail server. A SMTP SERVER ADDRESS Type - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 73
attach an image file to each e-mail. The attached image file will have the following file name: CAMERA ID +_yymmddhhmmss.jpg CAMERA ID is the leading four characters of the camera title. However, any of the following symbols, if included, will be replaced by a "-" (hyphen): / (slash), \ (backslash - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 74
click SET . If you selected "POP3" in [AUTHENTICATION], type the IP address or domain name of your POP3 server (up to 64 alphanumeric characters OUT 2 terminal outputs an alarm signal. Sends an e-mail when the camera detects a network failure during network recording. A If you selected "NETWORK - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 75
subject and message text portions of the e-mail. An e-mail consists of the following portions. Subject Camera Title Data and time Camera's IP address Message (TEXT) The camera title, date and time, IP address will be included automatically. 1 In [SUBJECT], type the subject (title) of the e-mail. You - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 76
Click FTP in the configuration menu to display the FTP SETTINGS screen. If you want to record images from the camera to an FTP server via the network, configure the FTP server settings and the image transmission conditions on this screen. A Configuring FTP server settings B Configuring - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 77
jpg] If no file name is specified, the system will enter "sanyo" for the [FILE NAME]. * To use a temporary file, name. Temporary file name: sanyo_ftp_temp_[IP address].temp Although the temporary file FAILURE: Sends a still image when the camera detects a network failure during network recording. - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 78
The setting values are interlocked among RECORDING, E-MAIL SETTINGS, and FTP SETTINGS screens. (Note that the setting configured most recently will take precedence.) B If you selected "ALARM IN1/2", "MOTION", or "ALARM OUT1/2" ... In [DURATION], select the image transmission duration. 5SEC, 10SEC, - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 79
in [NETWORK ADDRESS/SUBNET] ( 3 ). AUTHORIZED: Permits access to the camera. REJECTED: Rejects access to the camera. 3 In [NETWORK ADDRESS/SUBNET], configure the access settings for individual PCs. Type the IP address and the subnet mask of each PC and specify whether or not - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 80
4 Click SET . The settings are saved. Working with Administrator Configuration Screens 60/66 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 81
], specify the start and end time of the recording. Configuring the camera to start recording at 1:00 and end recording at 19:00 every Sunday (18 week indication in the [END] column to the next day. Configuring the camera to start recording at 1:00 every Sunday and end recording at 0:50 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 82
settings, be sure to click SET to update the schedule map. If you change the scheduled settings while the schedule is enabled, the camera will perform recording according to the changed schedule. If you schedule overlapping recording periods, the longer one will take precedence. If the configured - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 83
4 Click SET and then BACK . The setting is saved and the HOLIDAY SETTINGS section disappears. Working with Administrator Configuration Screens 63/66 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 84
Required operation privilege: admin, operator1 If the camera stops functioning for some reason or other, in [CAMERA REBOOT], click SET to reboot the camera system. You can update the camera's firmware to the latest version. 1 Click SET . The FIRMWARE UPDATE screen appears. 2 Click BROWSE and select - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 85
perform any operations on the screen or turn off the camera until the firmware update process is completed. While the firmware is being updated, all camera functions stop working temporarily. You cannot update the firmware while the camera is recording. In this case, an operation confirmation dialog - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 86
memory card, if necessary. A ACCESS LOG Shows the history of access to the camera in chronological order (up to 100 entries). Date and time, user name, authentication check result (OK/NG), connection destination IP address B SYSTEM LOG Shows a history of system operations and errors in chronological - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 87
VCC-HD2500/HD2500P Access the camera from your Web browser Live Screen Components Control panel Tool panel Information bar Working with Live Screen1/18 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 88
Explorer. The supported Web browser is Internet Explorer Ver.6.0 SP2 or higher, or Internet Explorer Ver.7.0. 2 In the address bar, type the IP address of the camera and press [Enter] key. When you access the camera, the login screen appears. If this is the first access to the camera, in the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 89
"VA-SW3050Lite" (Supplied) Installing this software adds to your PC the capability to simultaneously access two or more cameras and monitor live video from all connected cameras on a multi-view screen. Recording software "VA-SW3050Server/Client" (Optional) This software is higher-grade software than - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 90
When you access and log into the camera successfully, the live screen appears. For details, refer to the linked information. Video display area ( A ) Control Panel ( B ) Tool Panel ( C ) Information Bar ( D ) 1 Current date and time - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 91
in VGA size and perform the following operations just as when using a PTZ camera. To perform this operation, you need to set [DIGITAL PTZ] to "ON C Displaying clipped areas sequentially D Automatic panning/tilting E Manual panning/tilting Required operation privilege: admin, operator1, operator2 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 92
clipped area of the subject appears on the live screen. Deleting a clipping rectangle: Select a clipping rectangle and click DELETE . You can have the camera electronically zoom into or out of a clipped area. 1 Select a clipping rectangle in the image display area of the controller by clicking. The - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 93
2 On the live screen, click the portion you want to zoom in/out. 3 Click (WIDE) or (TELE). The camera zooms in on or out from the subject using the point you clicked as the origin. Zooming steps: 1, 1.4, 2, 2.8, 4, 5.6, 8, 11.2, 16 During zooming operation, the zoom - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 94
the controller or on the live screen. The clipped area stops the movement and the button color returns to gray. You can move a clipped area manually in all directions, up, down, right, and left. 1 Select a clipping rectangle in the image display area of the controller by clicking. The clipped area - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 95
You may use the zoom function in conjunction with the manual panning/tilting function. Click CLIENT SETTINGS on the control panel you can perform on this screen. Shows the name of the user currently accessing the camera. Select the stream you want to display on the live screen. STREAM1, STREAM2, - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 96
the screen without saving the settings, click CLOSE . This camera supports bidirectional audio communications, so you can send and receive audio between the camera and your PC. Hearing sounds from camera Sending audio messages to camera To perform bidirectional audio communications, for both the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 97
, the user who sends last will take precedence. 1 Click CLIENT SETTINGS on the control panel. The CLIENT SETTINGS screen appears. 2 Set [AUDIO (PC TO CAMERA)] to "ON", select the [DEFAULT ON] check box, and click SET . This sets the client PC to always enable the audio transmission capability when - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 98
surveillance system administrator, use these buttons to configure necessary settings according to the installation environment and application of your camera. Required operation privilege: admin, operator1 ("admin" only for NETWORK SETTINGS screen) Without the required operation privilege, you will - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 99
from up to 10 PCs. SCHEDULE SETTINGS Configure the time period during which recording with the camera is activated. OPTION SETTINGS Perform operations such as updating the firmware, restoring the factory defaults, and backing up and uploading settings. Other Buttons Operation Buttons Function - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 100
When the language selection screen appears, select the desired language within 10 seconds. Otherwise, you will be brought back to the live screen with the previous language setting. Click DISPLAY on the control panel to bring up the display control panel. : Panel is minimized. Clicking the button - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 101
image. For details, refer to the "Printing and Saving a Still Image" section. Click this button to send audio messages from the PC to camera. For details, refer to the "Configuring audio" section. Required operation privilege: admin, operator1, operator2 Click this button to receive sounds from the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 102
. For details, refer to the "Sending a Remote Alarm Signal" section. Click this button to disconnect your PC from the camera and close the browser window. You can capture and then save or print the desired scene of the JPEG live streaming during monitoring. 1 Click the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 103
specified an alarm output duration in [ALARM OUT TIME]. When the set output duration has elapsed, the camera stops sending the alarm signal automatically and the button returns to white. Manual Stop The manual stop method is applied if you have selected "CC" in [ALARM OUT TIME]. Click one of the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 104
If an error, warning, alarm, or other condition occurs, the corresponding status indicator on the information bar is shown in orange. 1 INFO: Appears when an error or warning occurs. Clicking the indicator label causes system information to appear in a separate window. The INFO status indicator - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 105
VCC-HD2500/HD2500P Preparing Your Computer for Network Operation Setting Up IP Addresses Automatically (Auto IP Setup) Checking the operating environment Configue the network information on your PC Operation Privileges and Login Users Before You Begin Network Operation1/14 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 106
to the linked information. 1 Assign a unique IP address to each camera. If you have newly installed two or more cameras on your network, you can accomplish this by using the supplied "Auto IP Setup" software. 2 Check your operating environment 3 Connect the camera to the network to which your PC is - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 107
VA-SW3050Server/Client (optional): Recorder/player application for recording and playing back streaming video data from the network. Before You Begin Network Operation 3/14 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 108
3 Camera details "Model name", "IP Address", "Port", "SSL", "Camera Title", and "Firmware Version" are not shown if the network board or other hardware is not supported. "IP Address", "Port", "SSL", and "Camera Title" are editable. (Refer to the "Manually Setting Up IP Addresses of Existing Cameras - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 109
not beyond the router. It skips any IP address that is already used. If you find that the searched cameras have overlapping IP addresses (indicated by a status of "CAUTION") or if you need to change a camera title, you can edit the displayed camera data manually as described below. Before You Begin - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 110
1 Select the desired camera and click Manual setting . The camera information dialog box opens. 2 Make changes to the camera data and click EXECUTE . This transmits your changes to the camera. You can see the problem of IP address overlap has been resolved in the [Status] row of the list, which has - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 111
and browser up-to-date. Note, however, that Internet Explorer 8 is not supported. In the cases below, configure the Internet Explorer's settings by clicking [Tool] and then [Internet Options]. When accessing the camera using SSL encryption for video signal transmission 1 Click the [Advanced] tab - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 112
1 In [Control Panel], click [Network and Internet Connections]. The [Network and Internet Connections] dialog box opens. 2 Click [Network Connections]. The [Network Connections] dialog box opens. Under [LAN or High-Speed Internet], the icon representing your LAN interface (Ethernet adapter) - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 113
following items:] list box, select the [Internet Protocol (TCP/IP)] check box. Confirm that the [Internet Protocol (TCP/IP)] check box is selected. If deselected, select the check box. 5 Click [Properties]. The [Internet Protocol (TCP/IP) Properties] dialog box opens, with the [General] tab shown - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 114
, the subnet mask, and the default gateway. 7 Check the configured settings and click OK . You are now done with the TCP/IP configuration. Close all the dialog boxes that are open. 1 In [Control Panel], click [Network and Sharing Center]. The [Network and Sharing Center] dialog box opens. - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 115
2 Click [Manage network connections]. The [Network Connections] dialog box opens. 3 Double-click [Local Area Connection]. The [Local Area Connection Status] dialog box opens. 4 Click [Properties] and, in the confirmation dialog box, click [Continue]. The [Local Area Connection Properties] dialog box - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 116
[Properties]. The [Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box opens, with the [General] tab shown. 7 Select the [Use the following IP address:] radio button and specify the IP address and the subnet mask. 8 Check the configured settings and click OK . You are now done with the TCP - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 117
Disabling authentication check at login You may set [ANONYMOUS USER LOG IN] to "ON" on the USER REGISTRATION screen to allow anyone to access the camera without any authentication check at login. In this case, all login users are regarded as guest users. This means that users will be presented with - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 118
user who log in last will take precedence. If you need to limit the PCs allowed (or disallowed) to access the camera for security reasons, you can register the IP addresses of those PCs on the SECURITY SETTINGS screen. Updating of live video may become slower depending on your system environment as - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 119
VCC-HD2500/HD2500P From Connection to Network Operation Live Video Monitoring Alarm Detection and Output Alarm Video Recording Software Information Configuration menu quick reference tables Quick Operation Guide1/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 120
ROM onto your PC. 4 Connect a microphone and a speaker system to the audio input and output jacks of the camera. AUDIO IN jack: Use this jack to connect an external microphone to hear the sound with live video, or card slot. The SD memory card must be formatted before use. Quick Operation Guide 2/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 121
monitor output socket. Connect your monitor to the camera via the supplied video cable. 8 Turn on the camera. The power indicator lights up and live . After adjustment, be sure to remove the monitor cable. 9 Access the camera from your PC's Web browser. Live video appears on the live screen. Now - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 122
If you are operating the camera for the first time, check the factory default video and audio of the subject in VGA size and perform zoom, pan, and tilt operations just as when using a PTZ camera. To use the digital PTZ function, set [DIGITAL PTZ] to "ON" on the JPEG stream registration screen - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 123
microphone sensitivity. In [FILTER (500Hz)], enable or disable the audio filter. In [OUTPUT LEVEL], select the desired audio output level. Audio output configuration Set [AUDIO (CAMERA TO PC)] to "ON" on the CLIENT SETTINGS screen. Audio input configuration Set [AUDIO (PC TO - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 124
5MIN, CC (Retains the alarm state as long for 5 sec.) as the alarm signal persists.) The camera uses the built-in motion sensor to detect alarm conditions. The motion sensor detects an alarm condition in CC (Retains an alarm state as long as the motion alarm persists.) Quick Operation Guide 6/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 125
screen. You can configure the camera to "automatically output alarm signals" or "remotely (manually) output alarm signals". You can configure the camera to automatically output an alarm signal . ) provided on the live screen to send alarm signals from the camera's Quick Operation Guide 7/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 126
TIME (Alarm output 5SEC (Ex.: Beeps a warning 10SEC to 5MIN, CC (Stops alarm output when time) for 5 sec.) Remote Alarm button is clicked.) Quick Operation Guide 8/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 127
After installing an SD memory card into the camera, you need to configure the alarm recording settings as described below. You can store the following occurrence.) When finished configuring the above basic recording settings, configure the recording schedule as required. Quick Operation Guide 9/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 128
and play back streaming video data from the camera on your PC. To make the maximum use of this camera, we recommend that you use this application. You to an FTP server To record video by sending image data from the camera to an FTP server, you need to configure the image transmission conditions - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 129
correct overlapping IP addresses. VA-SW3050Server/Client (Application for recording and playing back streaming images from camera) This recorder/player application is designed for use with SANYO network cameras. This is two PCs that serve as the server and the client. Quick Operation Guide 11/13 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 130
necessary settings according to the installation environment and application of your camera. Configuration Related to Network Connection Operation Changing the camera's IP address. Using SANYO's DDNS service. Using SSL communication. Streaming H.264 video in multicast Configuration Screen (Menu - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 131
Optional Configuration Operation Updating the camera's firmware to the latest version. Restoring the factory default settings Backing up or uploading settings Viewing the access log, system log, and operation log Configuration Screen (Menu) OPTION SETTINGS (FIRMWARE UPDATE) OPTION SETTINGS (FACTORY - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 132
conditions to be set as desired for each stream, you can choose the optimal video/image for your application. The camera offers the focus assist function that supports focus adjustment at megapixel image resolution, allowing you to fine-tune the focus in optimal conditions in an easy manner. The - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 133
× max) or Off VCC-HD2500P: 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 VCC-HD2500: 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Long exposure shutter (1×, 2×, 4×, 8×, 16×, 32×) ON/OFF (Set [SHUTTER] to "EI".) DC iris lens supported Max. 16× Enables electronic - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 134
SUPER FINE BITRATE mode: User-specified bit rate 10BASE-T/100BASE-TX TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, DDNS, RTP, RTSP, RTCP G.711 (Bidirectional) 20 BASIC authentication (ID/password), SSL, IP filtering Operating ambient -10 to +50°C, 90% RH or less (no - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 135
of network failures, log information, and other data to be stored with the camera. You can format the SD memory card via network operation on the SD MEMORY on the SD memory card. How to insert the SD card Turn off the camera and remove the protective cap. Then, with the label side facing down, insert - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 136
amplified speaker system or the monitor. This indicator lights up when the camera is powered on. When the camera is on, this indicator blinks to indicate the following camera statuses: Recording to SD memory card stopped Firmware update in progress An SD memory card error occurred (Fast blink) Use - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 137
connect an optional auto iris lens. For details, refer to the "Lens Installation" section. Use the buttons provided on the left-side face of the camera to perform the following operations. These operations may be performed with the Web browser installed on your PC. For details, refer to the linked - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 138
default users only) Press the FAR and SET buttons simultaneously. Not supported via network operation Adjusting focus Adjusting iris For details, refer to the "Lens Adjustment" section. CAMERA SETTINGS (FOCUS ASSIST/IRIS SETTINGS) Viewing Firmware Version For details, refer to the "Viewing - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 139
. Before attempting to connect each system component, carefully read the instruction manual that comes with it to familiarize yourself with the correct connection procedure. Connect the power terminals (24 VAC/12 VDC) of the camera to a power supply. A Connection to 24 VAC power supply Although - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 140
to set port forwarding, please refer to your router's Instruction manual. To connect two or more cameras, on the NETWORK SETTINGS screen, assign them with port numbers that are different from that of the first camera. Using PoE This camera supports PoE (Power over Ethernet). This means that you can - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 141
, connect the monitor output socket (MONITOR OUT) of the camera to a monitor via the supplied monitor cable. After adjustment, be sure to remove the monitor cable. To connect a cable, while pushing the protrusion of the - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 142
signal polarity of the alarm input terminal. You can connect an external switch to the ALARM IN1 terminal and use that switch to adjust the camera's internal clock. To do so, via network operation, configure the [CLOCK IN] setting on the CLOCK SETTINGS screen. Introduction 12/18 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 143
the lens cable plug to the auto iris lens socket provided on the left-side face of the camera. It is recommended that you use a CS-mount DC auto iris megapixel lens (optional). Keep from which you purchased the product (or the agent that provides the installation service). Introduction 13/18 - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 144
. If the focus assist function does not work properly because the camera produces too dark or too bright video images, perform iris adjustment C in advance. The focus must be readjusted if the camera has lost focus due to difference in the subject distance or ambient - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 145
of the status indicator ( B ) "FOCUSING" turns from black to orange. If the camera failes to focus on the subject, the FA bar ( A ) will not operate normally with the status indicator ( B ) showing "ERROR". In this case, manually adjust the focus (in Step 3 ). 3 Press the NEAR/FAR button to adjust - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 146
screen. 2 Adjust the focus in color and black-and-white mode, respectively. If you are using an optical zoom lens and zooming operation causes the camera to lose focus, adjust the flange back distance as follows. 1 Press the SET button for 2 seconds or more. The monitor now shows the SELECT MENU - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 147
or more. The focus adjustment screen will close. The focus adjustment screen will also close automatically if left idle for 5 minutes or more. If the camera produces too dark, too bright, or other incorrect video images, adjust the lens iris. 1 Press the SET button for 2 seconds or more. The monitor - Sanyo VCC-HD2500 | VCC-HD2500 Manual - Page 148
VERSION screen, you can check the firmware version, IP address, and other information on the camera. The firmware version can also be checked via network operation on the OPTION SETTINGS screen. 1 Press the SET button for 2 seconds or more. The monitor now shows
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
 |
 |
VCC-HD2500/HD2500P
Features of This Camera
Specifications
Name and Function of Each Component
Connections
Lens Installation
Lens Adjustment
Viewing Firmware Version
Introduction1/18