Sanyo VCC-HD2500 VCC-HD2500 Manual - Page 51
Working with Administrator Configuration Screens 31/66
UPC - 086483075018
View all Sanyo VCC-HD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
COLOR→B/W Select the luminance level at which switching occurs from the color mode to the black-and-white mode. B/W→COLOR Select the luminance level at which switching occurs from the black-and-white mode to the color mode. Changing one of these settings also changes the other setting based on the difference. To prevent hunting in infrared (IR) lighting, set these luminance levels to widely different values. Using one of these alarm input terminals as the Day/Night switching terminal, however, enables the camera to be switched between the color and black-and-white video modes when an external control signal is received. 1 In [DAY/NIGHT], select "COLOR". 2 In [EXT ALARM], select the desired alarm input terminal and click SET . ALARM IN1: Sets the ALARM IN1 terminal as the Day/Night switching terminal. ALARM IN2: Sets the ALARM IN2 terminal as the Day/Night switching terminal. OFF: Fixing Camera to Color Video Mode You need to enable the ALARM IN1/2 terminal and configure the signal polarity in [POLARITY] on the ALARM SETTINGS screen. Depending on the [POLARITY] setting, the camera will be switched between the color and black-andwhite video modes as follows (commonly applied to CAM1 and CAM2): If [POLARITY] is set to "NO": Color mode when open; Black-and-white mode when closed If [POLARITY] is set to "NC": Color mode when closed; Black-and-white mode when open If you set [EXT ALARM] to "ALARM IN1" or "ALARM IN2", the corresponding alarm input terminal will serve dedicatedly as a Day/Night switching terminal, so you can see only the item [POLARITY] on the ALARM SETTINGS screen. Working with Administrator Configuration Screens 31/66