Sanyo VCC-HD4000 Instruction Manual, VCC-HD4000P Installation - Page 13
Power Supply Connection, Monitor Connection, LAN Connection, Shielded LAN cable - poe
UPC - 086483072505
View all Sanyo VCC-HD4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Thicker than RG-6U (5C-2V): 500 m / 547 yds. max. Monitor Connection (Non-PoE power supply) Power Supply Connection To prevent a fire hazard use any UL listed wire rated VW-1. GND ~ AC 24V ~ Check that +/- polarity is correct. - + DC 12V ✱2 Thicker than 18 AWG Using different cables from those specified here may attenuate the video and/or sync signals and interfere with correct transmission. LAN Connection PC PC PC Switching hub Shielded LAN cable & "Connection when Using PoE (Power over Ethernet) Power Supply" (P8). & "Connection when Not Using PoE (Power over Ethernet) Power Supply" (P9). 12
GND
~
~
–
+
GND
~
~
–
+
12
Shielded LAN cable
&
“Connection when Using PoE (Power
over Ethernet) Power Supply” (P8).
&
“Connection when Not Using PoE
(Power over Ethernet) Power Supply”
(P9).
PC
Switching hub
PC
PC
✱
2
Thicker than 18 AWG
AC 24V
DC 12V
(Non-PoE power supply)
Power Supply Connection
To prevent a fire hazard use any UL
listed wire rated VW-1.
Monitor Connection
Using different cables from those
specified here may attenuate the
video and/or sync signals and
interfere with correct transmission.
Check that +/- polarity is correct.
Thicker than RG-6U (5C-2V): 500 m / 547 yds. max.
LAN Connection