Sanyo VDC-HD3300 VDC-HD3500 Summary Manual - Page 5

■ Adjusting focus NEAR FAR SET Lens Adjustment ⴺⴾ ⴼ ⴺ Roughly focus the subject using NEAR/FAR buttons. Make adjustment while watching the monitor. ⴼ Press the SET button. The camera automatically focuses on the subject. Note that the color of the status indicator ⦇ "FOCUSING" turns from black to orange. The status indicator ⦇ changes to "ERROR" when the subject cannot automatically come into focus. In this case, manually adjust the focus. ( Electronic manual) ⴾ Press the NEAR/FAR button to adjust the focus. Make adjustment so that the FA bar gauge ⦈ indicates the highest level. When the subject comes into focus, the color of the status indicator ⦇ "FOCUSING" changes from black to orange. Pressing the buttons moves the FB bar gauge ⦉. The position changes step by step each time the button is pressed and continuously at a high speed when the button is held down. ⵀ Press the SET button for 2 seconds or more. The focus adjustment screen will close. • The focus adjustment screen will also close automatically if left idle for 5 minutes or more. • VDC-HD3500P/HD3500/HD3300P/HD3300: If video is out of focus in either color or black-and-white mode, adjust the focus in respective modes. 4