Sanyo VPC-GH2 VPC-GH2 Owners Manual English
Sanyo VPC-GH2 - Full HD 1080 Video Manual
 |
UPC - 086483077869
View all Sanyo VPC-GH2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VPC-GH2 manual content summary:
- Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 1
OPERATION Dual Camera VPC-GH1EX VPC-GH1GX VPC-GH1PX VPC-GH1TA VPC-GH2 Important note This manual explains how to safely operate the VPC-GH1EX, VPC-GH1GX, VPC-GH1PX, VPC-GH1TA and VPC-GH2. Any information regarding only one of these products will be labeled as such. Please read these instructions - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 2
For first-time users Please read this manual to familiarize yourself with your camera's operation. ↓ To use the various camera features The Instruction Manual that explains the features in detail can be obtained from our website (page 45). ↓ To use additional features Visit the Sanyo website to - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 3
AND SAVE Preparing the camera 1 Insert the battery pack. 2 Open 1 Push out 3 Insert the battery pack. ˛ ˛ Battery cover 4 Close the battery cover. About saving your recorded data h If you wish to use an SD Memory Card, refer to page 15 to install the card in the camera. h An SD Memory Card - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 4
camera on. h If the screen to set the date and time appears, press the MENU button 2 times to cancel it. For how to set the date and time, see page 23. 2 Record. To record a video clip: h Press the [ ] button to begin recording a video clip. h Press the [ ] button - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 5
test shot to confirm that your camera is set up and ready to go i Sanyo declines any claim for compensation for recorded contents etc. in case of photographing or recording failure due to a chance camera Full-HD 6.5MB OK 100-0006 00:00:05 Orange frame Remaining battery power indication English iv - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 6
deleting files, press the MENU button. h Pressing the MENU button 3 times will return you to the screen in step 2. When you are finished using the camera... Press the ON/OFF button for at least 1 second to turn the - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 7
supplied dedicated USB interface cable to connect your camera to the computer. h Connect the cable between the camera's USB/AV terminal and the computer's USB connector. 2 Turn on the camera (page 20). h The USB Connection Screen appears on the camera's monitor. To USB/AV terminal USB CONNECTION - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 8
press the SET button. h The message [Found New Hardware] appears in the task tray, showing that the camera is recognized as a drive. h The card is recognized (mounted) as a disk, and the [XACTI (E:)] icon appears in the [My Computer] window. h The drive name (E:) may be different on your computer - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 9
sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or corrupt the files in your camera. 1 Left-click on the icon for safely removing hardware in the task tray. h A list appears showing the devices connected to the computer's USB connector - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 10
HOW TO READ THIS MANUAL i CHECKING THE INCLUDED ACCESSORIES 3 How to use the accessories 5 ABOUT THE CARD 9 Media cards that can be used with this camera 9 What "card" means in this manual 9 „ SETUP PARTS NAMES 10 CHARGING THE BATTERY PACK 12 Charging the battery pack 13 INSTALLING THE - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 11
MANUAL OBTAINING THE INSTRUCTION MANUAL 45 Contents of the Instruction Manual 45 How to obtain the Instruction Manual 49 „ ABOUT THE EYE-FI TRANSFER FEATURE About the Eye-Fi transfer feature 51 „ APPENDICES COMMONLY ASKED QUESTIONS 52 SPECIFICATIONS 60 Camera 60 Camera connectors 64 Battery - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 12
ACCESSORIES i Li-ion battery pack: 1 i Lithium-ion battery pack charger and power cord: 1 i Dedicated USB interface cable (pages vi and 49): 1 i Dedicated AV interface cable (page 43): 1 i Handstrap (page 5): 1 *To prevent from dropping the camera, be sure to attach the handstrap. - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 13
i GUIDE FOR BASIC OPERATION (VPC-GH1EX, VPC-GH1GX, VPC-GH1PX, VPC-GH1TA only) i SAFETY MANUAL (safety precautions booklet) Please read this booklet carefully before using the camera. i QUICK GUIDE i Obtaining the PDF instruction manual and cautions English 4 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 14
How to use the accessories k Handstrap 5 English - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 15
Strap holder Tripod mounting hole English 6 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 16
k Lens cap 1 Push in 2 Pull 7 English * Attach as shown in the illustration. - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 17
1 Push in 2 Pull * Attach as shown in the illustration. English 8 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 18
of card that can be inserted into and used with this camera is: i SD Memory Card i SDHC Memory Card i SDXC Memory Card What "card" means in this manual i In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards that can be used in this dual camera are referred to as "card". 9 English - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 19
SETUP SETUP SETUP PARTS NAMES Front Sub-REC buttons [R] button Video recording button [O] button Photo shooting button 1 Insert your hand in the handstrap from the top of the camera. 2 Enfold the camera in the palm of your hand to grip it. 3 Use your thumb to operate the [O] and [R] buttons above - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 20
Rear Monitor [ ] button Photo shooting button [ ] button Video recording button Multi-indicator ZOOM RANGE button MENU button Card slot cover DC IN terminal cover Strap holder Battery cover Arrow keys REC/PLAY button ON/OFF button SET button Arrow keys 11 English - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 21
to the socket on the battery pack charger. h Insert the connector straight and securely. Battery pack charger Power cord 2 Insert the battery pack in the battery charger. h Insert it in the direction indicated by the [o] mark on the battery pack. Battery pack charger Battery pack [o] mark 3 Plug - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 22
charge it. i When the battery pack temperature is high, the safety function may be activated and halt charging. Charge a battery pack in the following cases i A battery pack which has not been used for a long time i Newly purchased battery pack FOR AMERICAN USERS: i Use a UL Listed, 1.8 to - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 23
Flashing Problem with the battery pack or battery pack charger i Immediately remove the battery pack from the charger. i Do not use an abnormal battery pack. (The usable life of the battery pack has probably expired.) CAUTION Do not charge the battery pack immediately after the camera has - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 24
INSTALLING THE CARD Be sure to format a newly purchased card or one that was used in another device before using it in your camera (page 16). If an unformatted card is used, the card itself may become unusable. 3 Close the card slot cover. ˛ 1 Open the card slot cover. 2 Insert - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 25
ON/OFF button (pages 15 and 20). 2 Set the camera to the NORMAL mode (page 27). 3 Press the MENU button. 4 Select the [E] tab, and press the SET button. 5 Select "FORMAT" and press the SET button. i The Format Screen appears. Follow the instructions on the screen to format the card. Shooting without - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 26
INSTALLING THE BATTERY PACK Please charge the supplied battery pack before using it. 2 Open 1 Push out 3 Insert the battery pack ˛ ˛ Battery cover 4 Close the battery cover. 17 English - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 27
compartment. In this case, please discontinue its use and replace it with a new battery. Do not use the battery with the outer covering or label removed i Doing so may result in malfunction. HINT About the internal backup battery i This camera's internal battery serves to maintain the date and - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 28
temperature has dropped before resuming use. h During video recording, a countdown indicator will show the time starting about 15 seconds before shutdown. When the indicator shows 0 seconds, recording stops. h If the camera is turned off while the temperature is high (that is, while the \ icon is - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 29
/OFF button for at least 1 second. h If you briefly press the ON/OFF button, once, the camera will switch to the power save mode. h If you press the REC/PLAY button for at least 1 second, the camera turns on in the playback mode. REC/PLAY button ON/OFF button Turning off the - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 30
active In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after about 1 minute of save mode has been active for about 1 hour, the camera will switch to the standby mode. In this case, you can restore the power by pressing the ON/OFF button - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 31
, but this does not indicate a malfunction. i If the camera starts to feel uncomfortably hot during use, you might temporarily discontinue use until it cools down, or try holding it in your other hand for a while. Please use a tripod or other support when using the camera for a long time. English 22 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 32
DATE AND TIME SETTING The camera will record the date and time an image or audio recording HINT on page 25. Example: To set the clock to 7:30 p.m. on December 24, 2010 1 Turn on the camera (page 20), and press the SET button. h The Clock Set Screen appears. h Follow the procedures below to enable - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 33
SETUP 3 Set the clock. 1 Select "TIME". 2 Press the SET button. h The Set Time Screen appears. 3 Set the time to "19:30". h The time is set in the following order: Set the hour → Set the minute. h A 24-hour clock is used for the time display. 4 Press the SET button. CLOCK SET TIME 19:30 OK 4 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 34
to check that the date and time settings are still correct after replacing the battery pack and before shooting or recording of any type (follow step 1). To correct the date and time settings 1 Turn on the camera. 2 Display the Option Setting Menu 1 (page 30). 3 Select "CLOCK SET" and press the SET - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 35
recording) and the playback mode (for viewing your recorded images). 1 Turn on the camera (page 20). 2 Press the REC/PLAY button. h The mode changes. h mode changes each time the REC/PLAY button is pressed. SETUP 14M-S 7126 Ful -HD 001:00:12 SD 2010.12.24 18:41 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 36
MODE The "SIMPLE mode" comprises only those functions that are most often used and necessary to operate the camera, while the "NORMAL mode" enables full use of all the camera's many functions. Select the mode that is suitable for your purposes. Switching between the SIMPLE and NORMAL modes - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 37
Accessing/exiting the SIMPLE/NORMAL Mode Menu Screen 1 Set the camera to the recording or playback mode (page 26). 2 Select the desired operating mode (page 27). 3 If the Menu Screen is not displayed, press the MENU - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 38
change, and press the SET button. h The Setting Screen for the selected item appears. Press [I] Select an item to change Description of selected item Select video and photo size SN OK Press [J] Press SET To keep in HDTV size 14M 2M HDTV size 14M [4:3] OK 29 English - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 39
Using the NORMAL Mode Menu 4 Press [I] or [J] to select a tab. h The Menu Screen for the selected tab appears. 5 Press [H]. Press [I] Press [J] Tab RECORDING MENU 1 1 2 3 VIDEO PHOTO Ful -HD 14M-S SCENE SELECT 1 FILTER 2 FLASH 3 SELF-TIMER SN OK Option tab Press [H] RECORDING MENU - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 40
return to the Menu Screen, press the MENU button. Press [I] Press [J] Press SET Select an item to change 1 2 3 RECORDING MENU 1 VIDEO PHOTO Ful -HD 14M-S SCENE SELECT 1 FILTER 2 FLASH 3 SELF-TIMER OK Applicable mode PHOTO 16M 4640Z3480 12M 4608x2592[16:9] 14M-H 4352x3264 14M-S 4352x3264 10M - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 41
SHOOTING SHOOTING SHOOTING VIDEO CLIP RECORDING 1 Turn on the camera (page 20), and set it to the recording mode (page 26). 2 Press the the [ ] button again to stop recording. [] button Recording time 2M Full-HD RERCEC00000::0000::0099 5 5 Available recording time remaining English 32 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 42
SHOOTING SINGLE SHOTS Capture a still image (single-shot). 1 Turn on the camera (page 20), and set it to the recording mode (page 26). 2 Press the [ ] button. 1 Press the [ ] button halfway. h The autofocus operates, and the image is - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 43
point you wish to 1/2 focus on, you can refocus, for example, by changing the shooting angle. i The large target mark appears when Camera shake icon Shutter speed Aperture the camera focuses on a wide area in the center of the screen. Does it seem to take a long time to save images? i When - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 44
on the camera (page 20), and set it to the recording mode (page 26). 2 Press the [ ] button. [ ] button [ ] button 3 When you see a scene you'd like to capture as a still image, press the [ ] button. 4 Press the [ ] button to end the video clip recording. 2M Full-HD RERCEC00000::0000::0099 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 45
recording time. About the recording size of still images i The size of a still image captured during video clip recording depends on the video clip recording size. Video clip recording size setting Still image recording size !Y + "& , ) [ h It is not possible to capture sequential shots - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 46
two zoom functions: optical zoom and digital zoom. 1 Point the camera lens at the subject. 2 Push the zoom switch toward [T/]] or . Zoom switch [T/]] [W/P] ZOOM RANGE button Zoom bar 3 Take the picture. For video clip recording, see page 32. For shooting single shots, see page 33. When both - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 47
SHOOTING HINT When the ZOOM RANGE button is pressed... i The magnification is approximately doubled (double-range zoom). Press the button again to return to normal magnification. i The icon is shown on the Recording Screen during normal magnification, and a icon on the double-range zoom Recording - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 48
PLAYBACK PLAYBACK PLAYING BACK VIDEO CLIPS AND STILL IMAGES 1 Set the camera to the playback mode (page 26). the SET button. h The image you selected in step 2 is displayed fullscreen. h If a video clip was selected, playback begins. Press [J]. - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 49
Video clip playback operation To do this... Normal forward playback Stop playback Pause To play back one image at a time (singleframe step) Slow playback Forward playback - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 50
uploaded to a computer to be played back, the computer may not be able to play back the video fast enough, making it appear jerky. (The video will always be displayed properly on the camera monitor or a television.) i Depending on the card, recording may end even before the possible recording time - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 51
monitor NTSC: n PAL: m m n interface cable TV NTSC: m PAL: n n m Camera monitor n m n HDMI cable TV m n m m: Images are output n: Images are not output HINT i HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 52
Input terminal White plug: To Audio Input (L) terminal Red plug: To Audio Input (R) terminal Set the input to "VIDEO". Connecting to the HDMI terminal Use a separately sold mini-HDMI cable to connect to a TV. Mini HDMI cable (optional) To HDMI terminal To HDMI terminal - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 53
monitor. (Use the TV controls to adjust the volume.) i The same playback procedure as when playing back with the camera is used to play back audio recordings as well. CAUTION Insert and pull out the cable carefully i When connecting the cables, make sure that the - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 54
QUICK SEARCH BY OPERATION CHECKING THE INCLUDED ACCESSORIES How to use the accessories ABOUT THE CARD Media cards that can be used with this camera What "card" means in this manual GETTING THE MOST OUT OF YOUR CAMERA High-quality images with "Full High Definition*" Includes SIMPLE mode for quick-and - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 55
SINGLE SHOTS Using the flash SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP MACRO-PHOTOGRAPHY (ZOOM) OBTAINING THE INSTRUCTION MANUAL PLAYBACK PLAYING BACK VIDEO CLIPS AND STILL IMAGES How to save one frame from a video clip as a still image SLIDESHOW PLAYBACK PLAYBACK VOLUME DELETING FILES - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 56
Subject chaser settings High sensitivity mode setting Digital zoom setting Exposure compensation Storage folder setting PLAYBACK PLAYBACK MENU 1 Slideshow settings File protect setting Resize Rotate PLAYBACK MENU 2 Correcting the image Editing video clips Printing instructions FILE INFO DISPLAY - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 57
QUESTIONS TROUBLESHOOTING Camera Notes regarding the Scene Select feature and filters SPECIFICATIONS Camera Camera connectors Battery life Possible No. of Images/Possible Shooting Time/Possible Recording Time Concerning the multi-indicator Supplied battery pack charger Supplied Li-ion battery pack - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 58
How to obtain the Instruction Manual 1 Remove the card from the camera. h The program to access the website is stored in your camera's internal memory. This program cannot be accessed while a card is installed in the camera. 2 Start your computer, and use the supplied dedicated USB interface cable - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 59
menu) appears. 6 Click on [Go to Xacti GH1/GH2 Web Support Page]. h The screen to select your desired language appears. When you click on a language selection, the website page introducing this camera opens. h Select and download the desired instruction manual from the website. HINT If the Autorun - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 60
i Automatic halt of Eye-Fi operation when battery is low i AC adaptor connection restrictions (may or may not be supported, depending on the camera) i SSID setup/delete HINT i The Instruction Manual for the Eye-Fi transfer feature can be obtained from the Sanyo website (page 49). * "Adobe Reader" is - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 61
the camera in your pocket to warm it up before using it. Keep the battery pack in an environment of 10 to 40 °C (50 to 104 °F). If a battery becomes be assumed that the battery has reached the end of its service life. Please replace it with a new battery. Replace with a new battery pack. If this is - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 62
the self-timer and the exposure compensation are retained even after the camera is turned off. Select the resolution setting according to the intended use of a photo (trimming). +, G, t: For printing standard photo (photo service) sizes. ,, [: For photos displayed on a web page, or sent as e-mail - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 63
image sensor and may produce a coarser image. Set the scene select function to the landscape + mode when photographing. Or, set the focus range setting to manual focus -, and set the distance to ∞. APPENDICES English 54 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 64
be recorded with the images. When capturing an image, devise a way to compensate for a bright subject, for example, by changing the shooting angle. Hold the camera correctly and slowly press the [ ] button halfway to lock the focus. Then press the [ ] button all the way to capture the image. 55 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 65
is the playback image distorted? Answer This may happen when trying to play back images stored on a card from a different digital camera. If the subject moves or the camera is moved during recording, a distorted image may sometimes occur. Action Play back images that were recorded on a card using - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 66
motor-like sound during video clip playback? Why is problem with the printer. Action Not a malfunction. Not a malfunction. We cannot guarantee the accurate playback of files that have been edited using a computer. Not a malfunction. Adjust the volume on the TV. Please refer to the instruction manual - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 67
camera be operated? A problem such as inability to record or play back occurs. Answer You have attempted to join video clips having different resolutions or frame rates. Electromagnetic waves are emitted from the charger battery pack from the camera, wait a few minutes, then reinstall the battery - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 68
? Answer - Why does the "System error" message appear? A problem has occurred within the camera or card. Action When the camera is connected to a TV, you can switch the camera's video output to NTSC or PAL. If you have questions about accessories etc., please consult with a dealer near you for - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 69
to 64 GB) Image sensor/ camera effective number of pixels 1/2.33-inch (1.1 cm) CMOS sensor Still images: Approx. 14.3 million pixels Videos (HD mode): Approx. 11.9 million pixels Videos (SD mode): Approx. 14.3 million pixels * Video clip files recorded with models VPC-CA65 and VPC-CG65 are in the - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 70
/s (60i) Y: 1920 × 1080 pixels, 30 fps (30p) ": 1280 × 720 pixels, 60 fps (60p) &: 1280 × 720 pixels, 30 fps (30p) ): 640 × 480 pixels, 30 fps (30p) h The 60 fps frame rate of this camera is 59.94 fps, and the 30 fps frame rate is 29.97 fps. Full-auto TTL; manual setting available Focal - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 71
: 1/30 to 1/10,000 sec. (1/15 sec. max. when scene select function is set to lamp Q or the high sensitivity mode) Still image shooting (standard output sensitivity*)/ video clip recording mode: Auto (video clip recording: ISO 50 to 800; still image shooting: ISO 50 to 200)/ISO 50, ISO 100, ISO 200 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 72
shooting mode: 9-point range finder/spot focus; video clip recording mode: Continuous focus), manual focus Self-timer Approx. 2-second delay, 10- ) Volumetric capacity: Approx. 158 cc Weight Approx. 155 g (5.5 oz.) (camera only [without battery pack and card]) Approx. 172 g (6.1 oz.) (including - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 73
from the Option Setting Menu) USB USB 2.0 High Speed PC camera: USB video class Video output Total number of scan lines (effective number of scan lines): 750p (720p)/ 1125i (1080i)/525p (480p) Audio output: L-PCM 48 kHz sampling Battery life Shooting Playback Still image shooting mode - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 74
Still image mode + G 7 images 9 images 7 images 10 images 14 images 69 images 74 images 1,200 images 1,480 images 1,130 images images : 10 images 1,690 images 3,390 images t 74 images 11,300 images 22,700 images ! Y Video clip mode " & 21 sec. 28 sec. 28 sec. 37 sec. 1 hr. 1 min. 1 hr - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 75
-indicator will light, flash, or be off, depending on the different camera operations. Color Multi-indicator status Camera status Multi-indicator Green Lit Flashing Connected to a computer or printer Power save mode active Orange Lit Connected to a TV Slow Rise in internal temperature - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 76
49 g (1.7 oz.) i When using the supplied battery pack charger abroad, the power cord may need to be replaced battery pack Model number Voltage Capacity Ambient Temperature environment Humidity Dimensions Weight DB-L80 3.7 V 700 mAh 0 to 40 °C (32 to 104 °F) (during use) -10 to 30 °C (14 - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 77
trademark of FotoNation® Inc. Red Eye software© 2003-2005 FotoNation In Camera Red Eye - covered by U.S. Patent No. 6,407,777. Other patents Pending. SDXC logo is a trademark. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 78
up and ready to go i Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera. i Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure to adhere to the instructions given in this manual, or repairs or changes done - Sanyo VPC-GH2 | VPC-GH2 Owners Manual English - Page 79
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
 |
 |
VPC-GH1EX
VPC-GH1GX
VPC-GH1PX
VPC-GH1TA
VPC-GH2
GUIDE FOR
BASIC OPERATION
Dual Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-GH1EX, VPC-GH1GX,
VPC-GH1PX, VPC-GH1TA and VPC-GH2.
Any information regarding only one of these products will be labeled as such.