Sanyo VPC S1080 Owners Manual - Page 41
En-40, Set/display
View all Sanyo VPC S1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. Select the image that you want to print with the [ /X buttons. Select the [Print Num] (up to 99) with the / buttons. After selecting the desired image and printing number, press the SET/DISPLAY button to confirm. 4. Select [Print] with the / buttons, and press the SET/DISPLAY button to start printing. 5. The printing starts and the figure shown on the right hand side appears. [COMPLETE] will be displayed temporarily, reminding you that the printing procedure is finished. If a print error is detected, [PRINT ERROR] will be displayed. The image printing may be failed if the power to the camera is cut off. EN-40
EN-40
3.
If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the
[
e
/
X
f
buttons.
Select the [Print Num] (up to 99) with the
c
/
d
buttons.
After selecting the desired image and printing
number, press the
SET/DISPLAY
button to
confirm.
4.
Select [Print] with the
c
/
d
buttons,
and press the
SET/DISPLAY
button to start
printing.
5.
The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed
temporarily, reminding you that the printing
procedure is finished.
If a print error is detected, [PRINT
ERROR] will be displayed.
The image printing may be failed if the power to the camera is cut off.