Sanyo WXU10 Instruction Manual, PLC-WXU10B - Page 30

Setting (Computer / Video Mode) Menu Position Choose the menu location on the display screen. Mounting Front-Desktop The factory default setting. Front-Ceiling When you select this function, the projector turns the image upside down for ceilingmounted projection. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. Input Search Use to automatically search input signal. Highland Turn on Highland mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Logo Choose to display the logo or not. Lamp Counter Displays Hour the lamp's elapsed operating time (in hours). Lamp Counter Reset Press X to enter its sub-menu. Press MENU button to turn the lamp hour counter to 0 hours. Keystone Adjusts image distortion caused by tilting the projector. OSD Transparency Use to adjust OSD's transparency. OSD Timeout Duration OSD menu stays active (at idle state by second). EN-29