Sanyo XL51 Instruction Manual, PLC-XL51
Sanyo XL51 - PLC XGA LCD Projector Manual
 |
UPC - 086483072222
View all Sanyo XL51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo XL51 manual content summary:
- Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 1
Multimedia Projector MODEL PLC-XL51 Network Supported ❏Wireless LAN IEEE802.11b/g ❏Wired LAN 100-Base-TX/10-Base-T Memory Viewer ❏SD Memory Card Viewer ✽Refer to the owner's manual below for details about network and memory viewer function. ■Network Set-up and Operation (For - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 2
ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆Large Screen in Limited Space Short focus lens allows you to project large images from short distance (p.14). Images can be projected on the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 3
60 Cleaning the Air Filter 61 Resetting the Filter Counter 61 Cleaning the Projection Window 62 Cleaning the Projector Cabinet 62 Lamp Replacement 63 Lamp Replacement Counter 64 Appendix 65 Troubleshooting 65 Menu Tree 68 Indicators and Projector Condition 70 Compatible Computer - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 4
of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 5
. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Quick stops - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. - Do not put the projector in a case before it is - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 7
Instructions Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard. Side A Side B CAUTION - Do not put anything or sit on the projector, otherwise, it may fall down or cause failure of the projector - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 8
PLC-XL51 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector has a grounding-type AC line plug. This is a Department indicated in your User Instructions. If the plug supplied - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 9
surface. If the Infrared Remote Receiver is put on the wall or floor directly, the Infrared Remote Receiver may damage. w image can be smudgy. !1 Speaker !2 Battery Cover !3 Lamp Cover !4 Air Filter ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 10
u i o !0 !1 !2 !3 !4 q LAN Connection Terminal Connect the LAN cable (refer to the owner's manual "Network Set-up and Operation"). w SERVICE PORT This jack is used to service the projector. e COMPUTER IN 1 Connect output signal from a computer, or RGB scart 21pin video output to this terminal - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 11
indicator Turn yellow when the life of the projection lamp draws to an end (pp.63, 70). t ON/STAND-BY button Turn the projector on or off (pp.20-21). i SELECT button - Execute the selected item (p.22). - Expand or compress the image in Digital zoom mode (p.36). o KEYSTONE button Correct the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 12
projector on or off (pp.20, 21). w COMPONENT button Select COMPONENT input source. e AUTO PC button Automatically adjust the computer image the owner's manual of "Memory Viewer function". y CEILING button Reverse the top/bottom and left/right of image (p.49). u IMAGE button Select the image level ( - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 13
battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule and guidelines. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. See the right figures indicating Maximum - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 14
" ✔Note: •This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. •The brightness in images by projecting images on the screen before installing the projector and screen, since each projector shows slight variations. •Make sure to project images - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 15
Mounting the Rear Leg and the Stand Rear Leg 1 Turn off the projector and unplug the AC power cord. 2 Secure the rear leg with the four (4) screws. Installation Screw Rear leg Stand* 1 Turn off the projector and unplug the AC power cord. 2 Secure the stand with three (3) sets of the screw with a - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 16
(*One cable is supplied; other cables are not supplied with the projector.) Audio Output Audio cable (stereo) Monitor Output Monitor Output or MONITOR OUT terminal as input. •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •When the cable is of the longer - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 17
cable Audio cable (stereo) S-VIDEO IN (Video) (L) (R) VIDEO IIN AUDIO IN AUDIO OUT (stereo) ✔Note: •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •The S-VIDEO jack connection overrides the VIDEO jack connection when AUTO is selected in the Input Menu - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 18
Cables used for connection • Audio Cables (Mini Plug: stereo, RCA x 2) • Scart-VGA Cable • Component Cable (Cables are not supplied with the projector.) External Audio Equipment RGB Scart 21pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output Audio Input Scart-VGA cable Component - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 19
any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. Installation CAUTION The AC outlet must be near this equipment and must be easily - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 20
or service center. 20 16 The preparation display disappears after 30 seconds. Selected Input Source and Lamp Mode Lamp mode See page 51 for the Lamp mode. ✔Note: •The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector. PIN - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 21
see "Warning Indicator" on page 60. •While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again. •The fan rotation will terminate directly if the AC power cord is unplugged - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 22
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or on the remote control to display the On-Screen - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 23
y Screen Menu Used to set the size of image to Normal or Wide (p.44). u Sound Menu Used to adjust the volume or mute the sound (p.25). i Setting Menu Used to set the projector's operating configurations (pp.45-55). o Wired Menu See owner's manual "Network Set-up and Operation". !0 Wireless Menu See - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 24
at ZOOM maximum. Focus Adjustment Adjust the lens focus with the focus lever. Keystone Correction If a projected picture has keystone distortion, correct the image with the Keystone function. Press the KEYSTONE button on the top control or on the remote control. The keystone dialog box appears - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 25
Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Top Control VOLUME+/buttons Mute Press the MUTE button on the remote control to - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 26
for more details. Refer to the owner's manual "Network Set-up and Operation" for image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as "User ed buttons IMAGE button P-TIMER button NO SHOW button LAMP CONTROL button - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 27
out (p.49). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only the RGB signal. • Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation". Input Menu Input Menu icon Move the pointer (red arrow) to Computer 1 and press the SELECT button. Computer - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 28
proper images. If images are not projected properly, adjust manually. (pp.30-31) PC System Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection between your computer and the projector. (See "Troubleshooting" on - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 29
The system parameters adjusted in the Auto PC Adjustment can be stored in the projector. Once parameters are stored, the setting can be done just by selecting this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.30-31). • - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 30
match those signal formats. The projector has five independent memory areas (Mode 1-5) to store those parameters manually adjusted, which allows you to the Point 7 8 buttons to adjust the value to cut off flicker from the image displayed (from 0 to 31). Total dots Use the Point 7 8 buttons to adjust - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 31
Input Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select "Reset" and press the SELECT button. A confirmation - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 32
white screen by selecting the similar color to the wall color from the preset four colors. See the next page. Image 1-4 User preset image in the Image Adjust Menu (p.35). Remote Control IMAGE button IMAGE button Dynamic Standard Real Blackboard(Green) Colorboard Image 1 Image 2 Image 3 Image 4 32 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 33
on a white screen by selecting the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Image 1-4 User preset image in the Image Adjust Menu (p.35). Image Select Menu icon Image Select Menu Move the red frame pointer to the desired level - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 34
Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. The - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 35
cannot display any resolution higher than 1600 x 1200. If your computer's resolution is higher than that, lower the resolution before connecting to the projector. •The image data other than 1024 x 768 is modified to fit the screen size in initial mode. •True, Full, and Digital zoom +/- cannot be - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 36
expanded. When Digital zoom - is selected, the On-Screen Menu disappears and "D. zoom -" is displayed. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/- mode, press any button - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 37
Auto When selecting "Auto," the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation" . 37 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 38
set as Monitor out (p.49). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal. • Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation" . Computer 1 Source Select Menu Move the pointer to RGB (Scart) and press the SELECT button. 38 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 39
and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 40
can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Image 1-4 User preset image in the Image Adjust Menu (pp.42-43). Remote Control IMAGE button IMAGE button Dynamic Standard Cinema Blackboard - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 41
projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Image1-4 User preset image in the Image Adjust Menu (pp.42-43). Image Select Menu Image Select Menu icon Move the red frame pointer to the desired - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 42
Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 43
F or watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 44
Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 Press the to the desired function and then press the SELECT button. Normal Provide the image at a normal video aspect ratio of 4:3. Screen Menu Screen Menu icon Move - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 45
even when the AC power cord is unplugged. Reset........Reset the Zoom adjustment when the projector is turned off or the AC power cord is unplugged. Keystone This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the SELECT - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 46
. This mode is set as a default. Countdown off...Display the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off D o not show the On-Screen Displays - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 47
capturing the projected image, go to the Logo select function and set it to "User." Then the captured image is displayed when the projector is turned on image, select "Standard" in the Image Select Menu to capture a proper image (pp.3233, 40-41). •A signal from a computer can be captured up to XGA - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 48
hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 52-53. CAUTION: when you have changed THE LOGO PIn code, write down the new pin code - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 49
image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image On2, the status of Input and Lamp are displayed every time the signal is Sync on Green signal does not support Input search. • Input search - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 50
function will stop when turning off the projector. Refer to the owner's manual "Network Setup and Operation." Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 51
lamp power consumption and extends the lamp life. Remote control This projector projector: Select either "Code 1" or "Code 2" in this Setting Menu. To change the code for the remote control: Press and hold both the MENU and IMAGE where you purchased the projector or the service center. Remote control - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 52
number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory. PIN code lock When the projector is locked with the PIN code, the PIN code lock symbol appears on the menu bar. Enter a PIN code Select a number by pressing the Point - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 53
new pin code in column of the pin code no. memo on page 75, and keep it securely. If you forget your PIN code, the projector can no longer be started. Alarm This function allows you to configure the Alarm operation. See "How to Use the Antitheft Alarm Function" on pages - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 54
to set the running speed of cooling fans properly may affect the projector life. ✔Note: •When the Factory default function is executed, all the warning log records will be deleted. Lamp counter This function is used to reset the lamp counter. When the lamp life is left less than 100 hours, the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 55
Various test patterns are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, the lamp counter, and the filter counter to the factory default settings. Factory default Select Factory - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 56
: •This function is not a guarantee against stealing. •The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations. •The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open. •Pressing the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 57
Antitheft Alarm Function Other settings Change the PIN code 1 Press the F button and enter the four-digit PIN code number within about 10 seconds. The ALARM indicator blinks red for a few seconds and a high-pitched confirmation sound is produced. 2 While the indicator is blinking, enter a new PIN - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 58
for this projector. Using other types of battery may cause accident or fire hazard. Replacement Battery: SANYO Ni-MH BATTERY PACK Part No. 645 089 8587 How to replace the rechargeable battery pack 1 Unplug the AC power cord from a wall outlet. 2 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 59
exclusively with this projector. Do not use in other products or this may cause accident. ● Do not throw the battery into They may accidentally swallow the battery. ● Do not short-circuit battery terminals with metal objects. Do not store instructions or your local disposal rule and guidelines. 59 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 60
projector away from the duct or vent. - Are the air filters clean? Clean the air filters periodically. (p. 61) The projector is shut down and the WARNING indicator lights red. When the projector power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 61
, dust may accumulate on the lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Resetting the Filter Counter Be sure to reset the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 62
not use abrasive cleaners, solvents, or other harsh chemical cleaners to avoid damaging the projection window. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When it is heavily soiled, use a small amount of mild - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 63
to avoid damaging it. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XL51 : POA-LMP121 (Service Parts No. 610 - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 64
a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ●A Lamp may explode as a result of vibration - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 65
may need to be changed the setting for monitor output when connected to the projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the projector. - See if the selected system is corresponding with your computer or video - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 66
is out of focus. Picture is not bright enough. The color is strange. Image is Left/Right reversed. Image is Top/Bottom reversed - Adjust focus of the projector (see page 24). - Provide proper distance between the projector and the projection screen (see page 14). - Check the projection window to - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 67
center. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 68
"Network Setup and Operation." See owner's manual "Network Setup and Operation." Sound Sound Computer Input Volume Mute Quit 0 - 63 On / Off System (1) PC Adjust Image Select Mode 1 Mode 2 SVGA 1 - - - - ✽Systems displayed in the System Menu vary depending on an input signal. Auto PC Adj - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 69
Low / Medium / High 10seconds / 60seconds Quit / Long time On Quit Fan L1 / L2 Fan control Off / On1 / On2 Warning log Lamp counter Hour(s) Reset Filter counter Quit Hour(s) Off/100H/200H/300H Reset Yes/No Test pattern Factory default Quit 8 test patterns provided Quit Yes / No - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 70
clean the air filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If ✽ the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 71
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When these modes are selected, - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 72
15 kHz-100 kHz, V-sync. 50-100 Hz Optical Information Projection Image Size (Diagonal) Projection Lens Distance (Screen - Projector) Projection Lamp Adjustable from 60" to 80" F 1.85 lens with f 4.83 mm with manual focus -0.131' - 0.265' (-4.0 cm - 8.1 cm) 275 W Interface Video Input Jack S-Video - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 73
Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Alarm Label Stand Ferrite Core Cable Tie Network Application (CD-ROM) ●The specifications are subject to change without notice. ●LCD -Cable (10 m) Ceiling Hanger Wall Anchor Kit Model No. : - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 74
(Composite H/V sync.) 14 Vert. sync. 15 DDC clock/ ----- SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 12 34 5 6 78 Dimensions 41 (10.5) 0.17 (4.2) 7.75 (196.8) 1.87 (47.5) 7.09 (180) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.393 (10.0) 16.73 (425) 16.59 (421.5) 19.49 (495) 9. - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 75
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 76
and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 49 on the owner's manual "Network Set-up and Operation." Projector Input Computer 1 Computer 2 Video - Sanyo XL51 | Instruction Manual, PLC-XL51 - Page 77
KV7A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
Multimedia Projector
MODEL
PLC-XL51
Owner’s Manual
Network Supported
❏
Wireless LAN
IEEE802.11b/g
❏
Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏
SD Memory Card Viewer
✽
Refer to the owner’s manual below for details
about network and memory viewer function.
■
Network Set-up and Operation
(For Windows / For Macintosh)
■
Memory Viewer function
■
PJ Network Manager (For Windows)