Schwinn 130 Upirght Bike Owners Manual - Page 30
Console Setup Mode
View all Schwinn 130 Upirght Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CONSOLE SETUP MODE The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change the machine type, control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours - for service technician use only). 1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the Console Setup Mode. Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen. 2. The Console display shows the Date prompt with the current setting. To change, the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value (month / day / year). 3. Push OK to set. 4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value (hour / minute / AM or PM). 5. Push OK to set. 6. The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option. Push the Increase/Decrease buttons to change between "MILES" (Imperial English units) and "KM" (metric units). Note: If the units change when there is data in User Statistics, the statistics convert to the new units. 7. Push OK to set. 8. The Console display shows the Machine Type prompt with the current setting. Push the Increase/Decrease buttons to change between "BIKE" and Elliptical ("ELIP"). 9. Push OK to set. 10. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons to change between "ON" and "OFF". 11. Push OK to set. 12. The Console display shows the TOTAL RUN HOURS for the machine. 13. For the next prompt, push the OK button. 14. The Console display shows the Software Version prompt. 15. For the next prompt, push the OK button. 16 . T he Console will display the Power-Up Mode screen. 30