Schwinn 212 Recumbent Bike Assembly Manual - Page 10
Assembly Stage #2, Attach Rear Stabilizer and Seat Rail to, Seat Assembly
View all Schwinn 212 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Assembly Stage #2 Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5) (4) Flat Washers Ø8 * Ø16 * 2T (item#15) (2) Flat Head Screws (item #12) Step 5: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2 FLAT HEAD SCREWS (#12). Tighten bolts. Step 6: Attach SEAT RAIL (#18) to SEAT RAIL POST (#16) with 4 FLAT WASHERS (#15) and 4 ALLEN BOLTS (#5). Tighten bolts Step 7: Insert SEAT PIN ADJUSTMENT KNOB (#3) into SEAT FRAME (#8). Slide the seat assembly from stage 1 onto the SEAT RAIL (#9). Tighten seat assembly to the rail with the SEAT PIN ADJUSTMENT KNOB (#3). Insert HR CABLE (#47) into HR input on the back of the seat assembly (inset picture).
Assembly Stage #2
Attach Rear Stabilizer and Seat Rail to
Seat Assembly
Assembly hardware required:
(4) M8 Allen Bolts 16mm (item #5)
(4) Flat Washers Ø
8 *
Ø
16 * 2T
(item#15)
(2) Flat Head Screws (item #12)
Step 5:
Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2
FLAT HEAD SCREWS (#12).
Tighten bolts.
Step 6:
Attach SEAT RAIL (#18) to SEAT RAIL POST (#16) with 4 FLAT
WASHERS (#15) and 4 ALLEN BOLTS (#5).
Tighten bolts
Step 7:
Insert SEAT PIN ADJUSTMENT KNOB (#3) into SEAT FRAME (#8).
Slide the seat assembly from stage 1 onto the SEAT RAIL (#9).
Tighten seat
assembly to the rail with the SEAT PIN ADJUSTMENT KNOB (#3).
Insert HR
CABLE (#47) into HR input on the back of the seat assembly (inset picture).