Schwinn 212 Recumbent Exercise Bike Assembly Manual - Page 14

Assembly Stage #6

Add to My Manuals
Save this manual to your list of manuals

Assembly Stage #6 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5) (4) Curved Washers (item #6)

Section	Page
Assembly Instructions	1
FITNESS SAFEGUARDS AND WARNINGS	2
Other Important Safeguards and Warnings	2
212 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions	3
Parts List	4
Check Quantity Description Reference #	4
Hardware Chart	5
	5
Replacement Parts List	7
Reference # Description Part #	7
Instructions	8
Assembly Stage #1	8
Assemble Seat and Handle Bar	8
Assembly Stage #2	10
Attach Rear Stabilizer and Seat Rail to Seat Assembly	10
	10
Assembly Stage #3	11
Attach Front Stabilizer Tube and Pedals to Main Unit	11
Assembly Stage #4	12
Attach Seat Rail to Main Unit	12
Assembly Stage #5	13
Step 12: Take the UPPER HR WIRE (#7) and the UPPER COMPUTER WIRE (#8) and slide them through the HANDLEBAR POST (#4) as pictured above.	13

Match case Limit results 1 per page

Assembly Stage #6

Attach Console Mast to Main Unit

Assembly Hardware Required:

(4) Allen Bolts 16 mm long (item #5)

(4) Curved Washers (item #6)