Schwinn 230 Recumbent Bike 2007 model Assembly Manual - Page 15
Step 7 Prepare to Install Seat Assembly
![]() |
View all Schwinn 230 Recumbent Bike 2007 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ASSEMBLY INSTRUCTIONS Step 7 Prepare to Install Seat Assembly Tools: • Supplied Allen Wrench 7-1 Unscrew the the seven screws and washers (D-18) that secure the Seat Rail (H) and remove the Seat Rail from the unit. (Figure A) Note: You will have to disconnect the Heart Rate Wire (M). Do not let the Heart Rate Wire fall into the frame. 7-2 Unscrew the two screws and washers (D-18) that secure the Seat Rail Bracket (D-22) and remove the bracket from the Seat Rail. (Figure B) H D-18 Figure A M D-18 D-22 D-18 Figure B 13
![](/manual_guide/products/schwinn-230-recumbent-bike-assembly-manual-bb01759/15.png)
13
ASSEMBLY INSTRUCTIONS
Step 7 Prepare to Install Seat Assembly
Tools:
• Supplied
Allen Wrench
7-1
Unscrew the the seven screws and washers (D-18) that secure the
Seat Rail (H) and remove the Seat Rail from the unit. (Figure A)
Note:
You will have to disconnect the Heart Rate Wire (M).
Do not let the Heart Rate Wire fall into the frame.
7-2
Unscrew the two screws and washers (D-18) that secure the
Seat Rail Bracket
(D-22) and remove the bracket from the Seat
Rail. (Figure B)
D-18
H
D-18
Figure A
D-18
D-22
Figure B
M