Schwinn 230 Recumbent Bike Assembly Manual - Page 16
Step 8 Install Seat Assembly
View all Schwinn 230 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ASSEMBLY INSTRUCTIONS Step 8 Install Seat Assembly Parts: • Seat Assembly (From step 3-6) • Seat Rail (Ref. H) • Seat Rail Bracket (Ref. D-22) Tools: • Supplied Allen Wrench 8-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the Seat Assembly onto the Seat Rail (H). Release the Adjustment Knob to lock the Seat Assembly in place. Note: Make sure the seat Adjustment Knob is on the side of the Seat Rail that has the holes. 8-2 Reinstall the Seat Rail Bracket. 8-3 Reconnect the Heart Rate Wires and Reinstall the Seat Rail with Seat Assembly on the main unit. 8-4 Connect the Heart Rate Wire (M) to the Back of the Seat Assembly. (Figure B) Figure B H D-22 14 M K-3 Figure A
ASSEMBLY INSTRUCTIONS
14
Step 8 Install Seat Assembly
Parts:
•
Seat Assembly (From step 3-6)
• Seat Rail (Ref. H)
• Seat Rail Bracket (Ref. D-22)
Tools:
• Supplied
Allen Wrench
8-1
Pull out on the Seat Adjustment Knob (K-3) while sliding the
Seat Assembly onto the Seat Rail (H). Release the Adjustment
Knob to lock the Seat Assembly in place.
Note:
Make sure the seat Adjustment Knob is on the side of the
Seat Rail that has the holes.
8-2
Reinstall the Seat Rail Bracket.
8-3
Reconnect the Heart Rate Wires and Reinstall the Seat Rail with
Seat Assembly on the main unit.
8-4
Connect the Heart Rate Wire (M) to the Back of the
Seat Assembly. (Figure B)
H
K-3
D-22
Figure A
Figure B
M