Schwinn 250 Sears Recumbent Bike Assembly and Owner's Manual - Page 49

Unit rocks/does not sit level Pedals loose/unit difficult to pedal Clicking sound when pedaling Seat post movement Check leveler adjustment Adjust levelers until bike is level. Check surface under unit Check pedal to crank arm connection Check crank arm to axle connection Check pedal to crank arm connection Check locking pin Check adjustment knob Adjustment may not be able to compensate for extremely uneven surfaces. Move bike to level area. Pedal should be tightened securely to crank. Insure connection is not crossthreaded. Crank should be tightened securely to axle. Be sure cranks are connected at 180 degrees from each other. Remove pedals and reattach. Be sure adjustment pin is locked into one of the seat rail adjustment holes. Be sure knob is securely tightened. 49