Schwinn 420 Elliptical - 2010 Model Assembly Manual - Page 2
Table of Contents, Before Assembly
View all Schwinn 420 Elliptical - 2010 Model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Para obtener este manual en Español Latino Americano vaya a: http://www.schwinnfitness.com. Table of Contents Before Assembly 2 Hardware 6 Important Safety Instructions 3 Assembly 7 Specifications 4 Contacts 19 Tools Required 4 Instructions de montage 21 Parts 5 Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of minimum 94" x 110" (2.4 m x 2.8 m). Follow these basic points when you assemble your machine: 1. Read and understand the "Important Safety Instructions" before assembly. 2. Collect all the pieces necessary for each assembly step. 3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise. 4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. 5. The assembly requires 2 people. Note: Some axles contain oil. Use caution to avoid staining clothes or carpet. © 2009 Nautilus, Inc., All rights reserved ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include NAUTILUS®, BOWFLEX®, STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners. 2