Schwinn 431 Elliptical Assembly Manual - Page 14
Step 5 Install Console
View all Schwinn 431 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ASSEMBLY INSTRUCTIONS Step 5 Install Console Parts: • Console (Ref T) Tools: • Supplied Phillips Head Screwdriver NOTE: Before installing the console, make sure the toggle switch on the back of the Console (beside wire connectors) is set to EP. 5-1 Remove the four phillps head screws (Ref 9) from the back of the console. 5-2 Connect the Wire Harness (Ref W1), Contact Heart Rate Wire (Ref W2), and Fan Wire (Ref W3) to the back of the Console. 5-3 Reinstall the Console (Ref T), including the Cover, to the Console Handlebar (Ref D) using the screws removed in Step 5-1. T W3 W1 W2 9 D 11
11
ASSEMBLY INSTRUCTIONS
Step 5 Install Console
Parts:
• Console (Ref T)
Tools:
• Supplied Phillips Head Screwdriver
NOTE: Before installing the console, make sure the toggle
switch on the back of the Console (beside wire connectors)
is set to EP.
5-1 Remove the four phillps head screws (Ref 9) from the back of
the console.
5-2 Connect the Wire Harness (Ref W1), Contact Heart Rate Wire
(Ref W2), and Fan Wire (Ref W3) to the back of the Console.
5-3 Reinstall the Console (Ref T), including the Cover,
to the Console
Handlebar (Ref D) using the screws removed in Step 5-1.
T
W1
W3
D
9
W2