Schwinn Journey 8.0 Treadmill Assembly and Owner's Manual
Schwinn Journey 8.0 Treadmill Manual
View all Schwinn Journey 8.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn Journey 8.0 Treadmill manual content summary:
- Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 1
830 / 8.0 Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 2
Adjusting the Belt Tension 42 Aligning the Walking Belt 42 Lubricating the Walking Belt 43 Maintenance Parts 45 Troubleshooting 47 Warranty 49 To validate warranty support, keep the original proof of purchase and record the following information: Serial Number Date of - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 3
for damage to power cord, loose parts or signs of wear. Do not use if found in this condition. Contact Schwinn Customer Service for repair information. • Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the treadmill or pose a risk of - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 4
of age. • Consult a physician before you start an exercise program. Stop exercising if you feel parts or signs of wear. Do not use if found in this condition. Contact Schwinn Customer Service support platforms for stability before walking on the moving belt. • Disconnect all power before servicing - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 5
possible injury • A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. • Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 6
instruction manual before using. WARNING! • Prior to use, read and understand the Owner's Manual, including all Warnings. • Inspect product before use. Do not use if any parts To prevent injury, stand on the Foot Platforms before you start the machine. • The maximum user weight for this machine - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 7
Instructions not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. If KEY ", or add Safety Key, for a Safety Key fault. The Treadmill machine will not start a Workout, or will end and clear an active Workout, when the - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 8
reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65. 8 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 9
1 13 12 2 10 11 9 PARTS 3 4 5 6 8 7 * Item Qty Description 1 1 Console Assembly 2 1 Console Backing 3 1 Tray, Left 4 1 Tray, Right 5 1 Upright, Right 6 1 Handlebar Shroud, Right 7 1 Base Shroud, Right 8 1 Base Assembly Item Qty Description 9 1 Base - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 10
Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock- wise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly can - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 11
Be sure there is adequate height clearance for the raised deck. Using the support bar found below the rear of the walking belt, lift the wallking deck necessary. Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can abruptly move. Injury to you or - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 12
2. Connect the Input/Output (I/O) Cables and Attach the Uprights to Frame Note: D o not crimp cables. Do not fully tighten Hardware until instructed. X4 10 B E F 5 X4 F E A 12 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 13
3. Unfold the Walking Deck Slightly push the walking deck forward toward the front of the machine. With your left foot lightly push the top part of the hydraulic lift forward until the locking tube releases and you can pull the walking deck slightly toward the rear of the machine. Hold - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 14
* 4. Remove the Console Backing from the Console Assembly Note: D ispose of the pre-installed hardware. #2 X4 2 1 14 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 15
5. Connect the I/O Cables and Attach the Console to Frame Assembly Note: D o not crimp the Cables. 1 X4 FE B 6mm 15 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 16
6. Fold the Walking Deck and tighten ALL Hardware from previous steps 7. Place the Base Shrouds onto the Frame Assembly, and then unfold the Walking Deck Note: U nfold the Walking Deck after the Base Shrouds have been placed onto the Frame Assembly. The Base Shrouds do not use hardware or snap onto - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 17
8. Attach the Console Backing to the Frame Assembly NOTICE: A ttach the hardware marked below with the ( * ) first, then the hardware with the ( ** ), followed by the remaining hardware. 2 X10 D #2 ** * * ** 17 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 18
9. Attach the Handlebar Shrouds to the Frame Assembly NOTICE: T he parts have a right (" R ") and left (" L ") mark to assist with assembly. 11 X2 6 C #2 18 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 19
10. Snap the Trays into the Console Assembly NOTICE: Tray edges should be flush with the face of Console. 3 4 19 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 20
Frame Assembly Connect this machine to a properly grounded outlet only (see Grounding Instructions). 13 12 12. Final Inspection Inspect your machine to ensure that all hardware in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 21
Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can abruptly move. Injury to you treadmill in the folded position. 6. Carefully tilt the base frame of the folded treadmill a small distance back on the transport wheels while grasping the support - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 22
new location. Do not put objects where the walking deck would be if lowered. NOTICE: M ove the machine carefully so that it does not hit other objects. This can damage the Console operation. 8. Prior to use, refer to the "Unfolding the Machine" procedure in this manual the treadmill to top part of - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 23
, high quality walking belt designed to provide many hours of reliable service. The walking belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly, can exhibit a "thumping" noise when started. This is due to the belt taking on the curve of - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 24
G Console H Media Tray I Speaker J USB Port K MP3 Input L Upright M Motor Cover N Base O Leveler P Transport Wheel Q Hydraulic Lift R Dampener S Side Foot Support Rails T Walking Belt and Deck U Power Switch V AC Inlet W Telemetry Heart Rate (HR) Receiver (not shown) X Media Cable (not shown) Use - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 25
Enter Button INCLINE SPEED Fan Button Speed Enter Button Goal Track Achievement Lights- when an achievement level is reached or a result is reviewed, the achievement indicator light will activate. GOAL TRACK button- Displays the Workout Totals and Achievements for the selected User Profile USER - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 26
value falls into for the current User. These Heart Rate Zones can be used as a workout guide for a certain target zone (max, anaerobic, aerobic, fat burn, and warm up). Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 27
Option Guides The Option Guides inform the User where they are in a list of options with Time for the User Profile, or the total operational time of the machine. Note: The maximum time for a Quick Start workout is 9 hours, 59 minutes and 59 seconds (9:59:59). The Lap (Time) display shows the time - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 28
fitness machine, connect the USB Flash Drive to a computer and upload the file to your Schwinn new review. If using a USB Flash Drive to import workout results to Schwinn Schwinn Connect™ will automatically sync your workouts with MyFitnessPal® after the initial syncing. A User's Guide for Schwinn - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 29
Console. The CHR sensors are the stainless steel parts of the Handlebars. To use, put your efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity zone. Note: As with all exercises and fitness regimens, always use your best judgment when you - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 30
Should You Exercise Consult a physician before you start an exercise program. Stop exercising if you incline of the deck. 1. With the fitness machine in your workout area, inspect the walking section of this manual. The edges of the Walking Belt should be under the Side Foot Support Rails. If - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 31
, high quality walking belt designed to provide many hours of reliable service. The walking belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly, can exhibit a "thumping" noise when started. This is due to the belt taking on the curve of - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 32
the display. 1. Stand on the Side Foot Support Platforms. 2. Push the User button to select data (default values only). 3. Push the START button to start the Manual program. Note: The Safety Key must be workout, and allow the workout data to be reviewed. The User profile stores the following data: - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 33
values are displayed, push the OK button to set the Console. 9. The Console will go to the Power-Up Mode screen with the user selected. Reset a User Profile 1. From the Power-Up Mode screen, push the User button to select one of the User Profiles. 2. Push the OK button to select - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 34
RESET prompt and the current User Profile name. Push OK to start the Reset User Profile option. 5. The Console will now confirm the request to reset the User profile (the default selection is 'RESET user. The user can also manually adjust the incline and speed Guide (decrease arrow) will deactivate, telling the - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 35
PERFORMANCE 1: old to customize PERFORMANCE 1: Endurance 2 Performance 1 Performance 2 QUICKSTART (press and hold to customize PERFORMANCE 1: program) PERSONAL BEST: CHALLEQNUGIECKSTART (press and hold to customize PERFORMANCE 1: mLQTCWHCCCCoEcHDNHHNCMM:uEMMR+SpfLMIpLL:lRpLT: - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 36
of 1. 2. E BURN (SCH): Speed is pres3et.. Stand on the Side Foot Support Platforms. Fat Burn 2 CALORIE BURN Push the User button to select the desired User( will display the "READY ?" prompt. WARM UP 10. Push START to begin the goal-oriented workout. ThCeOwOoLrkDouOt WwiNll begin after a - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 37
reach the desired heart rate zone when setting the goal. The Console will display the heart rate value based on the current User settings. 8. Push START to begin the workout. The RECOVERY TEST program uses your age and other User information to see how your heart rate adjusts from a selected heart - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 38
), and push OK. 4. The program begins with a 2 minute period at a causal pace. The Console will display the selected zone and the heart rate value to start the test. 5. After two minutes, the Console will request the heart rate, "GRASP SENSORS", if one is not detected. If the heart rate is not - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 39
that surpasses the "LONGEST WORKOUT" or "CALORIE RECORD" of the previous workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding Achievement Indicator Light will also be active. 39 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 40
, or see maintenance statistics (Total Run Hours and Software Version- for service technician use only). 1. Hold down the PAUSE/STOP button and Right been muted, the Console will display the "AUDIO OFF" prompt before a Workout starts as a reminder. 9. Push OK to set. 10. The Console display shows - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 41
instructions fully before you start labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels. To reduce the risk of treadmill clean and dry. It may be necessary to use a mild detergent at times to remove all dirt and salt from the belt, painted parts - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 42
below the Side Foot Support Rails. 1. Push the START button to start the walking belt. Be sure not to touch the walking belt or step on the power cord. Keep bystanders and children away from the product you are servicing at all times. 2. Stand at the rear of the treadmill to see which direction - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 43
machine, using the following instructions: 1. Turn off the power to the machine with the power switch. 2. Unplug the treadmill fully from the wall most Hardware and Auto Parts stores. • Lube-N-Walk® Treadmill Lubrication Kit, available from your local specialty fitness dealer or Nautilus, Inc. 43 - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 44
Unfolding the Machine" procedure in this manual. Keep clear of the movement can possibly drop quickly in the last part of the movement. If you used to one side of your machine and start the belt at the slowest speed. Let children away from the product you are servicing at all times. 11. Switch off - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 45
Maintenance Parts Q P O A N L BC D E F G H M I K H J A Console Assembly B Safety Key Port C Fan D Contact Heart Rate Sensor E Console Cable F Tray, Left G Tray, Right H Right Upright Cable I Upright, Right J Base Shroud, Right K - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 46
Maintenance Parts ( Frame ) Front W S TU V AA DD CC Back BB AA Y X AA Z CC Z EE FF BB EE FF X Z S Fuse T Power Switch U Power Input V Motor Cover W Side Foot Support Rails X Base Support Y Deck Cushioners Z Transport Wheel AA Leveler BB Lifting Cylinder CC Incline Adjuster DD - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 47
Troubleshooting Condition/Problem Things to Check Solution No display/partial display/ Check can help make better conduct. These are available on the web or at medical or some larger fitness stores. If tests reveal no other issues, contact Customer Care for further assistance. Unit operates - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 48
manual. Make Instructions section.) Unit may be overloaded and draw too much current, which causes power to turn off to protect motor. Refer to maintenance schedule for belt lubrication. Make sure the walking belt tension is correct, and start unit again. If the above steps do not resolve the problem - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 49
2 years • Labor 1 year (Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.) How Nautilus Will Support the Warranty Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any - Schwinn Journey 8.0 Treadmill | Assembly and Owner's Manual - Page 50
Nautilus® 8004123.121514.D Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
830 /
8.0