Schwinn Journey 8.5 Treadmill Assembly and Owner's Manual
Schwinn Journey 8.5 Treadmill Manual
View all Schwinn Journey 8.5 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn Journey 8.5 Treadmill manual content summary:
- Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 1
870 / 8.5 Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 2
. If you have questions or problems with your product, please call 1 (800) NAUTILUS (628-8458). Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@ nautilus.com | outside U.S. [email protected] | Printed in China | © 2014 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 3
and understand the Assembly instructions. Read and understand the complete Manual. Keep the Manual for future reference. Schwinn Customer Service for repair information. • Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the treadmill - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 4
Manual. Keep the Manual for future reference. Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or dislodged, contact Schwinn Customer Service of age. • Consult a physician before you start an exercise program. Stop exercising if you feel - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 5
outlet when not in use, and before putting on or taking off parts. • Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 6
a moving belt. Read instruction manual before using. WARNING! • P rior to use, read and understand the Owner's Manual, including all Warnings. • can occur. • T o prevent injury, stand on the Foot Platforms before you start the machine. • T he maximum user weight for this machine is 136kg ( 300 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 7
Grounding Instructions This product must be grounded. If it should malfunction or The Console will display " + SAFETY KEY ", or add Safety Key, for a Safety Key fault. The Treadmill machine will not start a Workout, or will end and clear an active Workout, when the Safety Key is removed. Inspect the - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 8
reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65. 8 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 9
16 15 13 14 12 11 10 9 1 2 PARTS 3 4 5 7 6 * 8 Item Qty Description 1 1 Console Assembly 2 1 Console Backing 3 1 Tray, Left 4 1 Tray, Right 5 1 Handlebar Shroud, Upper Right 6 1 Handlebar Shroud, Lower Right 7 1 Upright, Right 8 1 Base Shroud, Right 9 1 Base Assembly Item - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 10
incline of the machine. Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to the - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 11
Assembly Make sure that there is safe clearance around, on and above your treadmill. Make sure there is no object to spill or cause blockage from the Be sure there is adequate height clearance for the raised deck. Using the support bar found below the rear of the walking belt, lift the walking deck - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 12
2. Connect the Input/Output (I/O) Cables and Attach the Uprights to Frame Note: D o not crimp cables. Do not fully tighten Hardware until instructed. X4 B E 12 F 7 X4 F E A 12 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 13
3. Unfold the Walking Deck Slightly push the walking deck forward toward the front of the machine. With your left foot lightly push the top part of the hydraulic lift forward until the locking tube releases and you can pull the walking deck slightly toward the rear of the machine. Hold up the rear - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 14
* 4. Remove the Console Backing from the Console Assembly Note: D ispose of the pre-installed hardware. #2 X4 2 1 14 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 15
5. Connect the I/O Cables and Attach the Console to Frame Assembly Note: D o not crimp the Cables. 1 X4 F E B 6mm 15 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 16
6. Fold the Walking Deck and tighten ALL Hardware from previous steps 7. Place the Base Shrouds onto the Frame Assembly, and then unfold the Walking Deck Note: U nfold the Walking Deck after the Base Shrouds have been placed onto the Frame Assembly. The Base Shrouds do not use hardware or snap onto - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 17
8. Attach the Upper Handlebar Shrouds to the Frame Assembly NOTICE: T he parts have a right (" R ") and left (" L ") mark to assist with assembly. 13 5 X8 C #2 17 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 18
9. Attach the Console Backing to the Frame Assembly NOTICE: A ttach the hardware marked below with the ( * ) first, then the hardware with the ( ** ), followed by the remaining hardware. 2 X10 G #2 ** * * ** 18 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 19
10. Attach the Lower Handlebar Shrouds to the Frame Assembly NOTICE: T he parts have a right (" R ") and left (" L ") mark to assist with assembly. 6 11 X2 C D D C #2 19 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 20
11. Snap the Trays into the Console Assembly NOTICE: Tray edges should be flush with the face of Console. 3 4 20 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 21
Frame Assembly Connect this machine to a properly grounded outlet only (see Grounding Instructions). 16 14 13. Final Inspection Inspect your machine to ensure that all hardware in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 22
YOU START Moving the Machine The machine can be moved by one or more persons. Use caution when you move the machine. The treadmill is treadmill in the folded position. 6. Carefully tilt the base frame of the folded treadmill a small distance back on the transport wheels while grasping the support - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 23
Prior to use, refer to the "Unfolding the Machine" procedure in this manual. Unfolding the Machine 1. Make sure there is sufficient space to lower the deck. 2. Make sure there is no object on or around the treadmill to spill or cause blockage from the fully unfolded position. 3. Slightly - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 24
, high quality walking belt designed to provide many hours of reliable service. The walking belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly, can exhibit a "thumping" noise when started. This is due to the belt taking on the curve of - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 25
Storage Tray H Emergency Safety Key Port I Contact Heart Rate (CHR) Sensors J Ergo Bar K Handlebar L Heart Rate Chest Strap M Side Foot Support Rails N Walking Belt and Deck O Dampener P Hydraulic Lift Q Transport Wheel R Leveler S Base T Motor Cover U Uprights V Power Switch W AC Inlet X Telemetry - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 26
Console Features The Console provides important information about your workout and lets you control the resistance levels while you exercise. The Console features touch control buttons to navigate you through the exercise programs. Fitness Score Display Goal Display Pacer Icon User Indicator - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 27
value falls into for the current User. These Heart Rate Zones can be used as a workout guide for a certain target zone (max, anaerobic, aerobic, fat burn, and warm up). Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 28
Option Guides The Option Guides inform the User where they are in a list of options with Time for the User Profile, or the total operational time of the machine. Note: The maximum time for a Quick Start workout is 9 hours, 59 minutes and 59 seconds (9:59:59). The Lap (Time) display shows the time - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 29
initial syncing. A User's Guide for Schwinn Connect™ can be found online at www.schwinnconnect.com/how-to-use/. Chest Strap Using the provided heart rate transmitter chest strap lets you monitor your heart rate at any time during your workout. Consult a physician before you start an exercise program - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 30
the contact areas. Check that the curve of the transmitter is oriented upward. If no signal appears or you need further assistance, call your Nautilus Representative. Remote Heart Rate Monitor Monitoring your Heart Rate is one of the best procedures to control the intensity of your exercise. Contact - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 31
your individual HRZ could be several beats higher or lower than what is shown. The most efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity until your heart rate reaches between 50 - 70% of your maximum heart rate. Continue at that pace - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 32
move freely. How Often Should You Exercise Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in Procedure in the Maintenance section of this manual. The edges of the Walking Belt should be under the Side Foot Support Rails. If an edge of the - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 33
, high quality walking belt designed to provide many hours of reliable service. The walking belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly, can exhibit a "thumping" noise when started. This is due to the belt taking on the curve of - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 34
the display. 1. Stand on the Side Foot Support Platforms. 2. Push the User button to select data (default values only). 3. Push the START button to start the Manual program. Note: The Safety Key must be workout, and allow the workout data to be reviewed. The User profile stores the following data: - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 35
5. The Console display shows the NAME prompt and the current User Profile name. Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 13 characters. The currently active segment will flash. Use the Increase/Decrease buttons to move through the - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 36
RESET prompt and the current User Profile name. Push OK to start the Reset User Profile option. 5. The Console will now confirm speed supplied by the user. The user can also manually adjust the incline and speed values at any time More Options Guide (decrease arrow) will deactivate, telling the User they - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 37
PERFORMANCE 1: kyards Endurance 2 Performance 1 Performance 2 kUyIaCrdKsSTARTPER(SpOrNeAsLsBEaSnT:d hold to customize PCERHFOARLMLAENCNEG1:E oomgirzaemPE)RFORMCthOAisMNpCPrAEoRg1PEr:Ea:RBmFE,OSCTRoMisnAasouNlteCoEmus1ae:tsicBaEllSyTspelaeccetefrdowmith UICK - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 38
PERFOBPoReoMtrACfNoaCmrEmp1: :ance 2 CHALLENGE 1 MILE BEST 5K BEST 10K BEST PERSONAL BEST: C COMPARE:BEST is automatically selected with this program, Console uses BEST pace from WEIGHT CTORANITNROL ENDURANCE 2: [ 1299 machine ] UsFeatCBasuern4:1BPOroOgTraCmAsMaPnd Their Brickyards Fat - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 39
reach the desired heart rate zone when setting the goal. The Console will display the heart rate value based on the current User settings. 7. Push START to begin the workout. A User can also set a Heart Rate Target value by selecting the HR TARGET program in the CUSTOM Category. The Console will - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 40
+ (secoSnPdEsE) D Note: The values presented during the first workout are based on the default pace value of 12 minutes per mile. When a workout is started, the Average Pacer will be active. To change the pacer during a workout, push the COMPARE button. The pacer will shift to the Best Pacer, and - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 41
PotenPtoitaenltiafloforr ImImpropvermoevntement FitnFitenessssScSorce ore User Fitness Level Based on Fitness Score 100 80 excellent 60 good high average 40 average low average 20 poor 100 excellent 80 60 good high average average 40 low average 20 poor 18-25 26-35 36-45 46-55 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 42
PAUSE/STOP during a workout. 1. Push the PAUSE/STOP button to pause your workout. The Console will display " PAUSED ". 2. To continue your workout, push the START button. To stop the workout, push the PAUSE/STOP button. The Console will go into Results / Cool Down mode. Results / Cool Down Mode All - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 43
, or see maintenance statistics (Total Run Hours and Software Version- for service technician use only). 1. Hold down the PAUSE/STOP button and Right been muted, the Console will display the "AUDIO OFF" prompt before a Workout starts as a reminder. 9. Push OK to set. 10. The Console display shows - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 44
instructions fully before you start labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels. To reduce the risk of maintaining or repairing this machine. Wipe the treadmill down after each use to keep the treadmill clean and dry. It may be necessary - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 45
below the Side Foot Support Rails. 1. Push the START button to start the walking belt. Be sure not to touch the walking belt or step on the power cord. Keep bystanders and children away from the product you are servicing at all times. 2. Stand at the rear of the treadmill to see which direction - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 46
Start workout. Lubricating the Walking Belt Your treadmill instructions: 1. Turn off the power to the machine with the power switch. 2. Unplug the treadmill treadmill is located on a surface that is easy to clean. 3. Fold the treadmill. Refer to the "Moving the Machine" procedure in this manual - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 47
to the "Unfolding the Machine" procedure in this manual. Keep clear of the movement path of the 10. Stay to one side of your machine and start the belt at the slowest speed. Let the belt Keep bystanders and children away from the product you are servicing at all times. 11. Switch off your machine. - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 48
Maintenance Parts T R Q S A P O N F BC D E J K M L G H I A Console Assembly B Safety Key Port C Fan D Contact Heart Rate Sensor E Console Cable F Tray, Left G Tray, Right H Grip, Upper Right I Grip, Lower Right J Right Upright Cable K Upright, Right L Base Shroud, Right M Base Cable N Base - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 49
CC EE DD AA Z CC BB Back GG BB HH DD EE GG HH Z BB U Power Switch V Fuse W Power Input X Motor Cover Y Side Foot Support Rails Z Base Support AA Deck Cushioners BB Transport Wheel CC Leveler DD Lifting Cylinder EE Incline Adjuster FF Pivot Assembly GG Belt Tensioner HH Rear Roller Cover - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 50
Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Unit display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact Customer Care for further assistance. Sensor grip Be sure hands are centered on HR sensors. - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 51
manual. Make Instructions section.) Unit may be overloaded and draw too much current, which causes power to turn off to protect motor. Refer to maintenance schedule for belt lubrication. Make sure the walking belt tension is correct, and start unit again. If the above steps do not resolve the problem - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 52
52 - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 53
the installation of replacement parts involved in the initial product assembly and preventative maintenance services.) How Nautilus Will Support the Warranty Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any machine that proves to be defective in materials or workmanship - Schwinn Journey 8.5 Treadmill | Assembly and Owner's Manual - Page 54
Nautilus® 8004128.121514.D Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
870 /
8.5