Seagate Barracuda Green Product Manual - Page 24
Drive mounting
View all Seagate Barracuda Green manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Configuring and Mounting the Drive www.seagate.com 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes. Do not overtighten the mounting screws (maximum torque: 6 in per lb). Figure 4 Mounting dimensions (2000 and 1500GB models) Recommended case temperature measurement location 24 Barracuda Green SATA Product Manual, Rev. A