Seagate BlackArmor NAS 110 User Guide - Page 16
Setup Steps for Administrators, Installing the BlackArmor NAS 110 Server and Software
View all Seagate BlackArmor NAS 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setup Steps for Administrators Setup Steps for Administrators If you are not a BlackArmor administrator, skip to page 26. Installing the BlackArmor NAS 110 Server and Software Before you begin: • Ensure that your computer meets the requirements listed on page 8. • Ensure that you have a solid, flat, stable surface for the server to sit on in an area with reliable ventilation. Ensure that the server's vents will not be covered or blocked and that the server is not placed near a heat source. Ensure that the server won't be in an area where liquids may be spilled on it. To install the BlackArmor NAS 110 server and software: 1. Use the Ethernet cable included in the kit to connect the BlackArmor NAS 110 server to a switch or router on your local network. Connect the Ethernet cable to the Ethernet port on the back of the server, as shown below. Step 2 Step 1 Figure 4: Connect power and network cables 2. Use the power adapter included in the kit to connect the BlackArmor NAS 110 server to a grounded power outlet. BlackArmor® NAS 110 User Guide 18