Seagate Maxtor BlackArmor BlackArmor PS User Guide - Page 124
using Seagate BlackArmor Backup. See, In addition
View all Seagate Maxtor BlackArmor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
• SATA controllers usually appear under the SCSI and RAID controllers section of Device Manager, while hard drives are listed under the Disk drives section. • The SATA controller and SATA hard drive must not be displayed in the Device Manager with a yellow exclamation mark or any other error indication. 8. After you have installed the hard disk in your computer and have configured it in BIOS, one can say that the PC "knows" about its existence and its main parameters. However, it is still not enough for the operating system to work with the hard disk. In addition, you have to create partitions on the new disk and format the partitions using Seagate BlackArmor Backup. See Chapter 14. Adding a new hard disk. Then configure your BIOS to boot from the SATA controller and boot from the SATA hard drive to ensure it works. 124 Copyright (c) 2000-2009 Acronis. All rights reserved. Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved.