Seagate ST1000VX000 SV35.2 Series PATA Product Manual - Page 22
Acoustics, Electromagnetic immunity
View all Seagate ST1000VX000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note. For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0.4 / (average latency + average access time) Table 4: Fluid Dynamic Bearing (FDB) motor acoustics Acoustic mode ST3750640AV ST3500630AV ST3320620AV ST3250820AV ST3160815AV Idle* 2.8 bels (typ) 2.9 bels (max) 2.8 bels (typ) 2.9 bels (max) 2.6 bels (typ) 2.7 bels (max) 2.5 bels (typ) 2.6 bels (max) Seek 3.2 bels (typ) 3.4 bels (max) 3.0 bels (typ) 3.1 bels (max) 3.0 bels (typ) 3.1 bels (max) 3.1 bels (typ) 3.2 bels (max) *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table 5: Radio frequency environments Test Electrostatic discharge Radiated RF immunity Electrical fast transient Surge immunity Conducted RF immunity Voltage dips, interrupts Description Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV 80 to 1,000 MHz, 3 V/m, 80% AM with 1 kHz sine 900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz ± 1 kV on AC mains, ± 0.5 kV on external I/O ± 1 kV differential, ± 2 kV common, AC mains 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine 0% open, 5 seconds 0% short, 5 seconds 40%, 0.10 seconds 70%, 0.01 seconds Performance level B A B B A C C C B Reference standard EN 61000-4-2: 95 EN 61000-4-3: 96 ENV 50204: 95 EN 61000-4-4: 95 EN 61000-4-5: 95 EN 61000-4-6: 97 EN 61000-4-11: 94 16 SV35.2 Series PATA Product Manual, Rev. E