Home » Seagate Manuals » Hard Drives » Seagate ST1000VX000 » Manual Viewer

Seagate ST1000VX000 SV35.2 Series SATA Product Manual - Page 7

Introduction

View all Seagate ST1000VX000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate SV35.2 Series® Serial ATA model drives: ST3750640SV ST3500630SV ST3320620SV ST3250820SV ST3160815SV These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Tunneling Magnetoresistive (TMR) recording heads. • State-of-the-art cache and on-the-fly error-correction algorithms. • Native Command Queueing with command ordering to increase performance in demanding applications. • Full-track multiple-sector transfer capability without local processor intervention. • Quiet operation. • SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns. • Support for S.M.A.R.T. drive monitoring and reporting. • Supports latching SATA cables and connectors. SV35.2 Series Serial ATA Product Manual, Rev. D 1

Section	Page
1.0 Introduction	7
1.1 About the Serial ATA interface	8
2.0 Drive specifications	9
2.1 Specification summary tables	9
2.2 Formatted capacity	14
2.2.1 LBA mode	14
2.3 Default logical geometry	14
2.4 Recording and interface technology	15
2.5 Physical characteristics	15
2.6 Seek time	16
2.7 Start/stop times	16
2.8 Power specifications	16
2.8.1 Power consumption	16
2.8.1.1 Typical current profiles	18
2.8.2 Conducted noise	18
2.8.3 Voltage tolerance	18
2.8.4 Power-management modes	19
2.9 Environmental specifications	20
2.9.1 Ambient temperature	20
2.9.2 Temperature gradient	20
2.9.3 Humidity	20
2.9.3.1 Relative humidity	20
2.9.3.2 Wet bulb temperature	20
2.9.4 Altitude	20
2.9.5 Shock	20
2.9.5.1 Operating shock	20
2.9.5.2 Nonoperating shock	21
2.9.6 Vibration	21
2.9.6.1 Operating vibration	21
2.9.6.2 Nonoperating vibration	21
2.10 Acoustics	22
2.11 Electromagnetic immunity	22
2.12 Reliability	23
2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)	23
2.13 Agency certification	23
2.13.1 Safety certification	23
2.13.2 Electromagnetic compatibility	23
2.13.3 FCC verification	24
2.14 Environmental protection	25
2.14.1 European Union Restriction of Hazardous Substances (RoHS)	25
2.15 Corrosive environment	25
3.0 Configuring and mounting the drive	27
3.1 Handling and static-discharge precautions	27
3.2 Configuring the drive	28
3.3 Serial ATA cables and connectors	28
3.4 Drive mounting	29
4.0 Serial ATA (SATA) interface	31
4.1 Hot-Plug compatibility	31
4.2 Serial ATA device plug connector pin definitions	32
4.3 Supported ATA commands	33
4.3.1 Identify Device command	35
4.3.2 Set Features command	39
4.3.3 S.M.A.R.T. commands	40
5.0 Seagate Technology support services	41
Index	43
A	43
C	43
D	43
E	43
F	43
G	43
H	43
I	43
K	44
L	44
M	44
N	44
O	44
P	44
Q	44
R	44
S	44
T	45
U	45
V	45