Seagate ST250DM000 Barracuda SATA Product Manual - Page 28
Drive mounting,
View all Seagate ST250DM000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Configuring and Mounting the Drive Figure 1 Attaching SATA cabling Signal connector Power connector Signal cable www.seagate.com Power cable Each cable is keyed to ensure correct orientation. Barracuda drives support latching SATA connectors. 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 2 and Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 inch (3.81mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). 28 Barracuda SATA Product Manual, Rev. B