Seagate ST250DM000 Barracuda 7200.10 SATA Product Manual - Page 23
Supports Hotplug operation per the Serial ATA Revision 2.5 spec
View all Seagate ST250DM000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Drive specification Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification ST3200820AS 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 0.5 Gs 350-500 Hz:: 0.25 Gs 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 5.0 Gs 350-500 Hz:: 1.0 Gs 2.5 bels (typical) 2.9 bels (max) 3.0 bels (typical) 3.2 bels (max) 1 per 1014 bits read 0.34% 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 at 25°C, 50% rel. humidity Yes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Barracuda 7200.10 Serial ATA Product Manual, Rev. K 17