Seagate ST250DM000 Barracuda 7200.9 SATA Product Manual - Page 20
Typical current profiles, Conducted noise, Note., Voltage tolerance
View all Seagate ST250DM000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2.8.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2.8.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 12V ± 10% 14 Barracuda 7200.9 Serial ATA Product Manual, Rev. C