Seagate ST320005MNA10G-RK BlackArmor NAS 110 User Guide - Page 37
Monitoring Your BlackArmor NAS 110 Server, Monitoring Status with the Server’s LEDs
UPC - 763649018675
View all Seagate ST320005MNA10G-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Monitoring Your BlackArmor NAS 110 Server Monitoring Your BlackArmor NAS 110 Server BlackArmor Manager and the BlackArmor NAS 110 server itself provide many ways to monitor the server's activity and status: • Monitoring Status with the Server's LEDs • Using Email Alerts to Monitor Server Status • Checking Disk Drive Status Using SMART Monitoring Status with the Server's LEDs Your BlackArmor NAS 110 server has several LEDs to help you monitor the status of its components, as well as its network and backup activity. (See the illustration on page 10 for help locating the LEDs.) Table 1: Front and Rear Panel LEDs LED State and Color Indication OneTouch Button Solid Blue Ready for backup Blinking Blue Backup in progress Solid Amber Error System Status Solid Blue Server is ready for use Blinking Blue Server starting up or shutting down Solid Amber Server has a system error Off Hard Drive Activity Solid Blue Server is powered off Drive is installed and operating properly Solid Amber LAN Port (Left and Off Right LEDs) Solid Green (L) Drive has failed Port has no network connection Connected to a gigabit Ethernet network Blinking Orange (R) Network connection Using the LEDs to Monitor the Server The System Status LED will indicate when there's a problem. When it's blue, the server and its components are working properly. If the System Status LED turns amber, a problem has occurred. 1. Check the LAN port LED on the back of the server, and the disk drive LED to locate the source of the problem. BlackArmor® NAS 110 User Guide 39