Seagate ST3600057FC Cheetah 15K.7 FC Product Manual

Seagate ST3600057FC - Cheetah 600 GB Hard Drive Manual

Get Seagate ST3600057FC - Cheetah 600 GB Hard Drive PDF manuals and user guides View all Seagate ST3600057FC manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST3600057FC manual content summary:

  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 1
    Product Manual Cheetah 15K.7 FC Standard models ST3600057FC ST3450857FC ST3300657FC Self-Encrypting Drive models ST3600957FC ST3450757FC ST3300557FC 100516225 Rev. B January 2010
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 2
    of this publication may be reproduced in any form without the written permission of Seagate Technology LLC. One gigabyte, or GB, equals one billion bytes and one terabyte will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 3
    installed options 8 3.7 User-installed specifications 13 5.1 Error rates 13 5.1.1 Recoverable Errors 13 5.1.2 Unrecoverable Errors 13 5.1.3 Seek errors 14 5.1.4 Interface errors 14 5.2 Reliability and service warranty 19 6.0 Physical/electrical specifications 20 6.1 AC power requirements
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 4
    Controlled access 35 7.2.1 Admin SP 35 7.2.2 Locking SP 36 7.2.3 Default password 36 7.3 Random number generator (RNG 36 7.4 Drive locking 36 7.5 Data bands 36 7.6 Cryptographic erase 37 7.7 Authenticated firmware download 37 7.8 Power requirements 37 7.9 Supported commands 37 8.0 Defect
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 5
    FC-AL physical interface 63 10.5.1 Physical characteristics 63 10.5.2 Connector requirements 64 10.5.3 Electrical description 64 10.5.4 Pin descriptions output 71 10.6.4 FC Differential input 71 11.0 Seagate Technology support services 73 Cheetah 15K.7 FC Product Manual, Rev. B iii
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 6
    iv Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 7
    1.0 Scope This manual describes Seagate Technology® LLC, Cheetah® 15K.7 FC (Fibre Channel) disc drives. Cheetah 15K.7 FC drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifications to the extent described in this manual. The Fibre Channel Interface Manual (part
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 8
    Storage Workgroup Security Subsystem Classs: Enterprise_A" specification with additional vendor-unique features as noted in this product manual. 2.1.1 Electromagnetic compatibility The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 9
    include disclosure of the inclusion of any RoHS-regulated substance in such parts or materials. Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and that all standard operating procedures are complied with. Cheetah 15K.7 FC Product Manual, Rev. B 3
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 10
    NCITS 305-199X (SCSI-3) Enclosure Services Trusted Computing Group (TCG) Documents (apply to SED models only) TCG Core Specification, version 0.9 TCG SSC Specification (draft) Self-Encrypting Drives Users Guide Seagate part number: 100515636 Specification for Acoustic Test Requirement and
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 11
    support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual Note. Never disassemble the HDA and do not attempt to service items in the sealed enclosure (heads, media, actuator, etc.)
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 12
    drivers and receivers • Downloadable firmware using the FC-AL interface • Supports SCSI enclosure services via interface connector • 128-deep task set (queue) • Supports up to 32 initiators • Drive user data for a drive that will be repurposed or scrapped 6 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 13
    • Authenticated firmware download 3.2 Media description The media used must be one of the supported sizes listed in the table below. Seagate designs specify capacity points at certain block sizes that Seagate guarantees current and future products if Cheetah 15K.7 FC Product Manual, Rev. B 7
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 14
    Safety and Regulatory Agency Specifications, part number 75789512, installed in the field. • Evaluation kit, part number 73473641. This kit provides an adapter card ("T-card") to allow cable connections for two FC ports and DC power. • Single-unit shipping pack. 8 Cheetah 15K.7 FC Product Manual
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 15
    and formatting. 4.2 Seek performance characteristics See Section 10.5, "FC-AL physical interface" on page 63 and the Fibre Channel Interface Manual (part number 77767496) for additional timing details. 4.2.1 Access time Average Single track Full stroke Typical Typical Typical Not including
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 16
    maximum) from removal of DC power. If the Motor Start option is enabled, the internal controller accepts the commands listed in the Fibre Channel Interface Manual less than 3 seconds after DC power has been applied. After the Motor Start command has been received, the drive becomes ready for normal
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 17
    . If the cache is enabled (see RCD bit in the FC Interface Manual ), data requested by the host with a read command is retrieved from the the actual size of the segment. Sending a size specification using the Mode Select command (bytes 14 and 15) does not set up a new segment size. If the STRICT bit
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 18
    previous write commands will have been written to the medium. Table 18 shows the mode default settings for the drive. 4.5.2 Prefetch operation If the Prefetch feature is enabled, data in contiguous logical that a prefetch hit is not likely to occur. 12 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 19
    The following reliability specifications assume correct host and drive manual using DC power as defined in paragraph 6.2, "DC power requirements." • Errors caused by host system failures are excluded from error rate computations. • Assume random data. • Default OEM error recovery settings
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 20
    sum of the individual device error rates. 5.2 Reliability and service You can enhance the reliability of Cheetah 15K.6 disc drives that are not relevant to individual units. AFR and MTBF specifications are based on the following assumptions for Enterprise Storage System Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 21
    firmware monitors specific attributes for degradation over time but can't predict instantaneous drive failures. Each monitored attribute has been selected to monitor a specific set feature. Setting the DEXCPT When the PERF bit is set, the drive is considered method, the firmware will issue to
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 22
    when the drive is performing unacceptably for a period of time. The firmware keeps a running count of the number of times the error rate The first trip point is set at 68°C which is the maximum temperature limit according to the drive specification. The second trip point .7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 23
    reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 5.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition through test) in bytes 1, bits 5, 6, and 7. Cheetah 15K.7 FC Product Manual, Rev. B 17
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 24
    Self-Test Results Value field is set to Fh 3. The drive will store the log page to non-volatile memory After a self-test is complete or has been aborted, the drive updates the Self-Test Results Value field routine was interrupted by a reset condition). 18 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 25
    purchase contract, Seagate warrants that applicable specifications will be repaired or replaced, at Seagate's Seagate's designated facility in accordance with Seagate's warranty procedure. Seagate Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 26
    6.0 Physical/electrical specifications This section provides information relating to the a single drive are shown below. Values indicated apply at the drive connector. Notes are shown following the last power requirements table. The standard supply. 20 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 27
    1.85 0.72 3.77 1.08 0.04 0.61 1.04 0.53 1.07 0.57 2.80 1.40 (Amps) +12V [2] ±5% [2] 0.69 1.85 3.49 0.04 1.03 1.07 2.84 Cheetah 15K.7 FC Product Manual, Rev. B 21
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 28
    be available to each device. 4. Parameters, other than spindle start, are measured after a 10-minute warm up. 5. No terminator power. 22 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 29
    DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. +5 V = +12 V = 250 mV pp from 0 to 100 kHz to 20 MHz. 800 mV pp requirements. Figure 1. Typical ST3600057FC current profiles Cheetah 15K.7 FC Product Manual, Rev. B 23
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 30
    Figure 2. Typical ST3450857FC current profiles 24 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 31
    Figure 3. Typical ST3300657FC current profiles Cheetah 15K.7 FC Product Manual, Rev. B 25
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 32
    calculate BTUs per hour, multiply watts by 3.4123. Figure 4. ST3600057FC DC current and power vs. input/output operations per second 26 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 33
    . To calculate BTUs per hour, multiply watts by 3.4123. Figure 5. ST3450857FC DC current and power vs. input/output operations per second Cheetah 15K.7 FC Product Manual, Rev. B 27
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 34
    drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at case temperatures limits are met, the drive meets all specifications over a 41°F to 131°F (5°C to 55°C) adversely affect the drives ability to meet specifications. To confirm that the required cooling for
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 35
    with a maximum gradient of 86°F (30°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point 1.0" .5" Figure +40,000 feet (-305 to +12,210 meters) Cheetah 15K.7 FC Product Manual, Rev. B 29
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 36
    installed connector may be up or down. 6.4.4.1 Shock a. Operating-normal The drive, as installed Operating-abnormal Equipment, as installed for normal operation, does additional details refer to Seagate specifications 30190-001 (under 100 or less by Seagate for general freight shipment shall withstand
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 37
    Z Y X X Z Y Figure 8. Recommended mounting Cheetah 15K.7 FC Product Manual, Rev. B 31
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 38
    in the X, Y, or Z axis. b. Operating-abnormal Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 39
    ), in electronic products effective July 2006. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers . 6.4.9 Electromagnetic susceptibility See Section 2.1.1.1. Cheetah 15K.7 FC Product Manual, Rev. B 33
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 40
    specifications Refer to Figure 9 for detailed physical dimensions. See Section 9.4, "Drive mounting."" Height: 1.03 in Width: 4.00 in Depth: 5.79 in Weight (max): 1.76 pounds 26.10 mm 101.60 mm 147 mm 0.80 kilograms H // T -Z- S REF [1] A -Z- M U -XP 34 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 41
    to the drive security services. Security-related commands will not be accepted unless they also supply the correct credentials to prove the requester is authorized to perform the command. 7.2.1 Admin SP The Admin SP allows the drive's owner to enable or disable firmware download operations (see
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 42
    cabinet and installed in another system. When the drive is shipped from the factory, the firmware download port is locked and the drive will reject any attempt to download new firmware. The drive owner must use the SID credential to unlock the firmware download port before firmware updates will be
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 43
    firmware download attempts, the drive also only accepts download files which have been cryptographically signed by the appropriate Seagate non-SED) drive models. 7.9 Supported commands The SED models support the following two commands in addition to the commands supported by the standard (non-SED)
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 44
    ). In addition, Seagate provides the following supported by the drive are described in the Fibre Channel Interface Manual. depend on the options previously set in the Error Recovery Parameters the Error Recovery mode page. The drive firmware error recovery algorithms consists of 13 levels for
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 45
    the Read Retry Count, Write Retry Count, and Recovery Time Limit parameters. However, the drive does not report any unrecovered errors. Cheetah 15K.7 FC Product Manual, Rev. B 39
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 46
    , msec) 23.94 35.91 39.9 51.87 79.8 107.73 Setting these retry counts to a value below the default setting could result in an increased unrecovered error rate which may exceed the value given in this product manual. A setting of zero (0) will result in the drive not performing error recovery. For
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 47
    being put into service by the host system per ARRE/AWRE settings. With BMS, and protect data by setting the "Start time service service host-initiated commands. Overhead associated with a return to host-servicing The default setting for Media is the default setting from the Seagate factory. With
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 48
    the data to the original location. If a verification of this rewrite fails, the sector is re-mapped to a spare location. 42 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 49
    installation is a plug-and-play process. There are no jumpers, switches, or terminators on the drive. Simply plug the drive into the host's 40-pin Fibre Channel backpanel connector attempting to win arbitration. • Set all option selections in the connector prior to applying power to Manual, Rev. B 43
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 50
    flows in the direction shown or in reverse direction (side to side) Figure 10. Air flow Above unit Under unit 44 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 51
    25-inch adapter frame, verify with Seagate Technology that the drive can meet the shock and vibration specifications given herein while mounted in such an drive so that it can meet the shock and vibration specifications listed in this manual. 9.5 Grounding Signal ground (PCBA) and HDA ground are
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 52
    provided in the Fibre Channel Interface Manual (part number 100293070). 10.1 FC-AL features This section lists the Fibre Channel-specific features supported by Cheetah 15K.7 FC drives. 10.1.1 Fibre Channel link service frames Table 6 lists the link services supported by Cheetah 15K.7 FC drives
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 53
    Terminate task Clear ACA Target reset Clear task set Abort task set Supported No Yes Yes Yes Yes 10.1.3 Fibre Channel supported. Table 8: FC SCSI FCP response codes Function name Function complete Function not supported Function reject Response code 00 04 05 Cheetah 15K.7 FC Product Manual
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 54
    offset Not checked. Port Login Accept will return a 0-not supported. Valid version level x N_Port/F_Port Must = 0, N_Port Alternate The node name is not checked or saved by the drive. SO Service options Class 3 only. MSB Class valid Must = 1 Intermix x Stacked .7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 55
    00 00 00 00 Version CC Bytes (22, 23 and 24) and (30, 31 and 32) are currently factory set to 00 04 CF respectively (subject to change). FS Receive buffer field size. The drive returns and uses the receive 00 22 XX Indicates fields that are not used. Cheetah 15K.7 FC Product Manual, Rev. B 49
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 56
    00 00 Version CC Bytes (22, 23 and 24) and (30, 31 and 32) are currently factory set to 00 04 CF respectively (subject to change). UI Unique identifier. This 24-bit field is uniquely assigned to originated on Port A. 2 FLOGI originated on Port B. 50 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 57
    logout occurs and a LS_RJT is returned to the fabric. NN Node Name. The drive does not check or save the node name. SO Service Options-Class 3 only. MSB Class valid Must = 1 Intermix x Stacked connection req. xx Sequential delivery Must = 1 Other bits reserved xxx XX Cheetah 15K.7 FC
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 58
    interface address is selected through the interface connector, both ports will seek the same loop is connected in loops with previous Seagate FC drive products: Barracuda 4LP manuals. Subject to buffer availability, the Cheetah 15K.7 FC drives support: • Concurrent port transfers-The drive supports
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 59
    to SED models only) Command code 00h 01h 03h 04h 07h 08h 0Ah 0Bh 12h 15h 16h 17h 18h 1Ah Supported (Y/N) [4] Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Device Identification page (83h) Firmware numbers page (C0h) Date code page (C1h) Jumper settings page (C2h) Device Behavior Manual, Rev. B 53
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 60
    Supported diagnostics pages Translate page Enclosure services page Send diagnostics page Y N Executable Supported Relative address Search data high Search data equal Search data low Set limits Prefetch N Y Executable Synchronize cache N Y Executable Lock- Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 61
    microcode with offsets and save mode (7) Firmware download option [2] Read buffer (Mode 1Ch definition Write same (10) PBdata LBdata Not used Log Select Log Sense Support Log page (00h) Write Error Counter page (02h) Read Error Executable Executable Cheetah 15K.7 FC Product Manual, Rev. B 55
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 62
    Supported 5E 5F 60-7Eh 7Fh 7Fh 7Fh 80h 81h 82h 83-8Eh 8Fh 8Fh 93h A0h A2h A3h B5h C0-DFh EO-FFh Supported (Y/N) [4] Y Y Y N N N N N Y Y Y N Y N Y N A A N Y (PI only) Y (PI only) Y ( Log page (3Eh) Not used XD write XP write XD read Not used Mode Select (10 firmware corruption. This usually makes the
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 63
    supported. N = No. Command is not supported. A = Support is available on special request. 10.3.1 Inquiry data Table 17 lists the Inquiry command data that the drive should return to the initiator per the format given in the Fibre Channel Interface Manual a complete set of new firmware into the
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 64
    the drive. Some drives may have unique firmware with unique default values also. On standard as changeable values. Originally, current values are installed from saved or default values after a SCSI implementation (see the Fibre Channel Interface Manual ). Definitions: SAV = Current saved value.
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 65
    b7 c0 8f 00 00 00 READ CAPACITY DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 45 DD 2F AF 00 00 02 00 E./.... Cheetah 15K.7 FC Product Manual, Rev. B 59
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 66
    c0 8f 00 00 00 READ CAPACITY DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 34 65 F8 6F 00 00 02 00 60 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 67
    b7 c0 8f 00 00 00 READ CAPACITY DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 22 EC B2 5B 00 00 02 00 Cheetah 15K.7 FC Product Manual, Rev. B 61
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 68
    Zero latency read Queue tagging (up to 128 queue tags supported) Deferred error handling Parameter rounding (controlled by Round bit in Supported Y Y Y Y Y Y Y Y N N Status Good Check condition Condition met/good Busy Intermediate/good Intermediate/condition met/good Reservation conflict Task set
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 69
    , and logical characteristics are provided within this section. The operational aspects of Seagate's Fibre Channel drives are provided in the Fibre Channel Interface Manual.. J1 interface connector Figure 11. Physical interface 10.5.1 Physical characteristics This section defines physical
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 70
    number 787317-1 71781 512-220-91-101N 717431040 The FC-AL SCA device connector is illustrated in Figure 13. Pin 20 1.618 ± .003 in (41 select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 71
    [2 TTL input 40 5 Volts charge *Short pins in mating backpanel connector. [1] This pin may be connected to external logic to detect the backplane is either open or grounded (open for the '1' setting, grounded for the '0' setting). Alternatively, these pins may be driven by a 3.3V Manual, Rev. B 65
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 72
    10.5.6 Power Power is supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length. Four 12 volt pins provide +12 volt power current-limiting resistor are external to the drive. 66 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 73
    Enable Bypass signal is active, the corresponding Port Bypass LED signal in connector J1 is driven low by the disc drive. A pull down resistor to insure the bypass is enabled if the disc drive is not installed. The Enable Bypass signal is active under failing conditions within the Manual, Rev. B 67
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 74
    high and low inputs to the SEL_ID lines per the specifications in table 29 on page 70. Note. Table 27 support and the mode are determined by the drive using a discovery process. Refer to the Fibre Channel Interface Manual for a description of ESI operation. 10.5.11.1 Parallel Enclosure Services
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 75
    1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A Setting (dec) 00 01 02 03 04 05 06 07 08 09 10 11 12 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 Setting (dec) 43 44 45 46 47 48 49 50 51 52 53 54 55 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D Setting (dec) 86 87 88 89 90 91 92 93 94 95 96 97 98
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 76
    , the drive has 10K ohm pull up resistors that default the device control code to 7 (1.0625 GHz). Table lists the supported codes. Table 28: Device control code values 2 (pin 17) 0 0 0 0 1 1 1 1 1 (pin 18) 0 0 1 4mA IOH < -1.6mA IOH < -500µA IOL < 1.6mA 70 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 77
    10.6.2 LED driver signals Fault and Active LED signals are located in the FC-SCA connector (J1). See Table 30 for the output characteristics of the LED drive signals. Table 30: LED input voltage swing Parameter 200 < Vin < 1.300 mV Notes AC coupled Cheetah 15K.7 FC Product Manual, Rev. B 71
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 78
    Minimum 2 GHz 470 ps 315 ps min. 305 ps 226 ps 4 GHz 235 ps 1581/1132 145 ps 113 ps 72 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 79
    Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance mySeagate my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 80
    East and Africa, go to the "Contact Us" page on www.seagate.com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, go to the "Contact Us" page on www.seagate.com. 74 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 81
    addresses 63 Admin SP 35 AES-128 Product Manual, Rev. B BandMasterX 36 basic link service frames clear task set function 47 commands supported 52 Common features 48, 51 Company ID 49, 50 Compare command 54 Concurrent sequences 48 condensation 29 condition met/good status 62 connector
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 82
    service support 52 E electrical description of connector 64 signal characteristics 70 specifications 01h) command 53 errors 38 extended link service frames 46 reply frames 46 Extended sense 43, 64 options supported 52 physical interface 63 SCA device connector, illustrated 64 selective reset
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 83
    /errors 38 internal drive characteristics 9 IRAW 42 J J1 connector 43 Jumper settings page command 53 jumpers 43 L latency average rotational 9, 10 LBdata 55 LED driver signals 71 Link Service Reject (LS_RJT) 46 link services supported 46 Locking SP 35, 36 LockOnReset 36 Lock-unlock-cache command 54
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 84
    Zero latency read 62 miscellaneous status support ACA active 62 ACA active, Intermediate/good 62 Reservation conflict 62 Task set full 62 miscorrected media data 13 Mode on Port B 49 package size 30 package test specification 4 packaged 30 parameter rounding 62 pass-through state Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 85
    physical interface 63 description 63 physical specifications 20 PI 49, 50 pin 10) command 56 reliability 7 specifications 13 reliability and service 14 repair and return information part numbers 64 SCSI interface commands supported 52 Search data equal command 54 high command 54 low
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 86
    task 47 task management response codes 47 Function complete 00 47 Function not supported 05 47 Function reject 04 47 task set full status 62 TCG 35 TCG Storage Architecture Core Specification 2 technical support services 73 temperature 28, 44 limits 28 non-operating 29 regulation 2 See also cooling
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 87
    command 54 Write long command 55 Write same command 55, 56 X XD read 56 XD write 56 XD write extended command 56 XID reassign 48 XP write 56 Z zero latency read 62 zone bit recording (ZBR) 6 Cheetah 15K.7 FC Product
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 88
    82 Cheetah 15K.7 FC Product Manual, Rev. B
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 89
  • Seagate ST3600057FC | Cheetah 15K.7 FC Product Manual - Page 90
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100516225, Rev. B, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Product Manual
Cheetah 15K.7 FC
100516225
Rev. B
January 2010
Standard models
ST3600057FC
ST3450857FC
ST3300657FC
Self-Encrypting Drive models
ST3600957FC
ST3450757FC
ST3300557FC