Seagate ST3600057FC Cheetah 15K.7 FC Product Manual - Page 29
Conducted noise immunity, Power sequencing, Current profiles
View all Seagate ST3600057FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6.2.1 Conducted noise immunity Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. +5 V = +12 V = 250 mV pp from 0 to 100 kHz to 20 MHz. 800 mV pp from 100 Hz to 8 KHz. 450 mV pp from 8 KHz to 20 KHz. 250 mV pp from 20 KHz to 5 MHz. 6.2.2 Power sequencing The drive does not require power sequencing. The drive protects against inadvertent writing during power-up and down. 6.2.3 Current profiles The +12V and +5V current profiles are shown in the following figures. Note: All times and currents are typical. See Section 6.2 for maximum current requirements. Figure 1. Typical ST3600057FC current profiles Cheetah 15K.7 FC Product Manual, Rev. B 23