Seagate ST500DM002 Barracuda 7200.10 SATA Product Manual - Page 31
ST340215AS
View all Seagate ST500DM002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Drive specification Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle*** Quiet seek Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification ST340815AS ST340215AS 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 0.5 Gs 350-500 Hz:: 0.25 Gs 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 5.0 Gs 350-500 Hz:: 1.0 Gs 2.8 bels (typical) 3.0 bels (max) 3.0 bels (typical) 3.2 bels (max) 1 per 1014 bits read 0.34% 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 at 25°C, 50% rel. humidity Yes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. ** 7200.10 family product achieved higher sustained data rate over same 7200.9 family capacity points using identical measurement methodology. *** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Barracuda 7200.10 Serial ATA Product Manual, Rev. K 25