Home » Seagate Manuals » Hard Drives » Seagate SV35.2 » Manual Viewer

Seagate SV35.2 SV35.2 Series PATA Product Manual - Page 15

Recording and interface technology, Physical characteristics - 500gb

Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

2.4 Recording and interface technology Interface Recording method Recording density, KBPI (kbits/inch max) Track density, KTPI (ktracks/inch avg) Areal density (Gbits/inch2 avg) Spindle speed (RPM) (± 0.2%) Internal data transfer rate (Mbits/sec max) Sustained data transfer rate (Mbytes/sec max) I/O data-transfer rate (Mbytes/sec max) 750GB 500GB 320GB ATA Perpendicular 926 813 145 128.2 114.4 7,200 1,030 78 72 100 (Ultra DMA mode 5) 250GB 160GB 824 137.259 101 80 2.5 Physical characteristics Drive specification Maximum height 4, 3 and 2 disc models (mm) (inches) 26.1 1.028 1 disc model Maximum width Maximum length Typical weight Cache Size (mm) (inches) (mm) (inches) (mm) (inches) 1 disc models 2 disc models 3 disc models 4 disc models ST3750640AV ST3500630AV ST3320620AV ST3250820AV ST3160815AV 20.0 0.787 101.6 4.000 +/- 0.010 146.99 5.787 345 grams (0.76 lbs) 600 grams (1.32 lbs) 635 grams (1.40 lbs) 720 grams (1.59 lbs) 16 Mbytes 8 Mbytes SV35.2 Series PATA Product Manual, Rev. E 9

Section	Page
1.0 Introduction	7
2.0 Drive specifications	9
2.1 Specification summary table	9
2.2 Formatted capacity	14
2.2.1 LBA mode	14
2.3 Default logical geometry	14
2.4 Recording and interface technology	15
2.5 Physical characteristics	15
2.6 Seek time	16
2.7 Start/stop times	16
2.8 Power specifications	16
2.8.1 Power consumption	16
2.8.1.1 Typical current profile	18
2.8.2 Conducted noise	18
2.8.3 Voltage tolerance	18
2.8.4 Power management modes	19
2.9 Environmental specifications	20
2.9.1 Ambient temperature	20
2.9.2 Temperature gradient	20
2.9.3 Humidity	20
2.9.3.1 Relative humidity	20
2.9.3.2 Wet bulb temperature	20
2.9.4 Altitude	20
2.9.5 Shock	21
2.9.5.1 Operating shock	21
2.9.5.2 Nonoperating shock	21
2.9.6 Vibration	21
2.9.6.1 Operating vibration	21
2.9.6.2 Nonoperating vibration	21
2.10 Acoustics	22
2.11 Electromagnetic immunity	22
2.12 Reliability	23
2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)	23
2.13 Agency certification	23
2.13.1 Safety certification	23
2.13.2 Electromagnetic compatibility	23
2.13.3 FCC verification	24
2.14 Environmental protection	24
2.14.1 European Union Restriction of Hazardous Substances (RoHS)	25
2.15 Corrosive environment	25
3.0 Configuring and mounting the drive	27
3.1 Handling and static discharge precautions	27
3.2 Breather filter hole precautions	28
3.3 Jumper settings	29
3.3.1 Master/slave configuration	29
3.3.2 Cable-select option	29
3.3.3 Ultra ATA/100 cable	30
3.4 Drive mounting	30
4.0 ATA interface	33
4.1 ATA interface signals and connector pins	33
4.1.1 Supported ATA commands	34
4.1.2 Identify Device command	36
4.1.3 Set Features command	39
4.1.4 S.M.A.R.T. commands	40
5.0 Seagate Technology support services	41
Index	43
A	43
B	43
C	43
D	43
E	43
F	43
G	43
H	43
I	43
J	44
K	44
L	44
M	44
N	44
O	44
P	44
R	44
S	44
T	45
U	45
V	45