Sennheiser MKE 300 Instructions for Use - Page 5
MKE 300 directional video microphone - battery
View all Sennheiser MKE 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
MKE 300 directional video microphone MKE 300 is a light-weight electret condenser microphone, especially designed for video cameras. The MKE 300 microphone is mounted to the video camera using the clip destined for carrying the film lamp. Once placed in this clip, MKE 300 with a lobar polar pattern preferrably records sound coming from the object to be filmed. Due to the elastic suspension of the internal microphone system, transmission of structure-born noise resulting from handling the camera is drastically reduced. The permanently mounted windscreen effectively suppresses wind noise when recording outdoors. The MKE 300 has an integrated power supply, using a LR 44 batterywhitch offers an operating time of apporx.200 hours. If not used constantly, remove battery ! Special characteristics: • High directivity • Integrated windscreen • Integrated power supply • Shoe adapter clip • 3.5 mm ø jack and helical cable • High resistance to structure-born noise and elastic suspension of the microphone system • ON/OFF switch with integrated battery control • Light weight: 60 g only Setting the device into operation: • Put microphone into shoe adapter clip and fasten it by means of the knurled screw • Put 3.5 mm ø jack plug into the corresponding microphone socket at the camera • Switch on power supply of the microphone. The LED has to light up for a moment! In any case, power supply has to be switched off after use! Technical data Acoustic principle Pick-up pattern Sensitivity at 1 kHz and a distance of 1 m, 90° Sensitivity (free field, no load) Frequency response Equivalent sound pressure level according to DIN 45500 Nominal impedance Min. terminating impedance Power supply Battery life Plug Dimensions (without cable) in mm Weight Extent of delivery pressure gradient transducer combined with directional tube supercardioid/lobar 11 dB ± 3 dB 16 mV/Pa ± 2.5 dB 150 - 17,000 Hz < 18 dBA 200 Ω 2.7 kΩ round cell, type LR 44 > 200 hours 3.5 mm ø jack 230 x 65 x 50 approx. 60 g 1 MKE 300 microphone Subject to alterations