Sennheiser TeamConnect Ceiling 2 TeamConnect Ceiling 2 and biamp TesiraFORTEr - Page 5
Application Note for TesiraFORTÉ, AN 1255 v1.0 | 5/11
View all Sennheiser TeamConnect Ceiling 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Application Note for TesiraFORTÉ TeamConnect Ceiling 2 Each C-IC6 loudspeaker will be connected directly to the AMP-450BP using standard CAT cable. A custom block with the recommended C-IC6 EQ curve has been added before the output. Each AMP-450BP channel will support up to two C-IC6 loudspeakers. The current configuration assumes four speakers will be in use. If additional speakers are needed, this can be configured from the AMP-450BP control dialog by changing the Speaker Count parameter for the appropriate channel. AN 1255 v1.0 | 5/11
AN 1255 v1.0 | 5/11
Application Note for TesiraFORTÉ
TeamConnect Ceiling 2
Each C-IC6 loudspeaker will be connected direc-
tly to the AMP-450BP using standard CAT cable.
A custom block with the recommended C-IC6
EQ curve has been added before the output.
Each AMP-450BP channel will support up to two
C-IC6 loudspeakers. The current configuration
assumes four speakers will be in use. If additio-
nal speakers are needed, this can be configured
from the AMP-450BP control dialog by changing
the Speaker Count parameter for the appropriate
channel.