Sennheiser ew 100 G2 Instructions for Use - Page 70

Switching the radiomicrophone on/off ̈ Turn the protective cap ᕧ at the bottom of the radiomicrophone so that ¸ the ON/OFF button ¹ becomes accessible. ¹ ̈ Press the ON/OFF button to switch the radiomicrophone on. The red LED ¸ lights up. ̈ To switch the radiomicrophone off, press the ON/OFF button ¹ until "OFF" appears on the display. The red LED ¸ goes off. ¶ SK 100 G2 Muting the transmitters All transmitters have a MUTE switch that noiselessly mutes the transmitter's audio signal without switching the transmitter off. Muting the SK 100 G2 and SKP 100 G2 transmitters ̈ Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. ̈ Set the MUTE switch back to the original position to retransmit the audio SKP 100 G2 signal. Muting the SKM 100 G2 radiomicrophone ̈ Turn the protective cap ᕧ at the bottom of the radiomicrophone so that the MUTE switch Ƹ becomes accessible. ¶ ̈ Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. Ƹ ̈ Set the MUTE switch back to the original position to retransmit the audio signal. Activating/deactivating the lock mode All transmitters and receivers have a lock mode that can be activated or deactivated via the operating menu (see: „Activating/deactivating the lock mode" on page 35). The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. 23